The relative area of vessels in xylem correlates with stem embolism resistance within and between genera.

The resistance of xylem conduits to embolism is a major factor defining drought tolerance and can set the distributional limits of species across rainfall gradients. Recent work suggests that the proximity of vessels to neighbors increases the vulnerability of a conduit. We therefore investigated whether the relative vessel area of xylem correlates with intra- and inter-generic variation in xylem embolism resistance in species pairs or triplets from the genera Acer, Cinnamomum, Ilex, Quercus and Persea, adapted to environments differing in aridity. We used the optical vulnerability method to assess embolism resistance in stems and conducted anatomical measurements on the xylem in which embolism resistance was quantified. Vessel lumen fraction (VLF) correlated with xylem embolism resistance across and within genera. A low VLF likely increases the resistance to gas movement between conduits, by diffusion or advection, whereas a high VLF enhances gas transport thorough increased conduit-to-conduit connectivity and reduced distances between conduits and therefore the likelihood of embolism propagation. We suggest that the rate of gas movement due to local pressure differences and xylem network connectivity is a central driver of embolism propagation in angiosperm vessels.

Hydathodes in ferns: their phylogenetic distribution, structure and function.

BACKGROUND AND AIMS: Ferns are the second largest group of vascular plants and are distributed nearly worldwide. Although ferns have been integrated into some comparative ecological studies focusing on hydathodes, there is a considerable gap in our understanding of the functional anatomy of these secretory tissues that are found on the vein endings of many fern leaves. In this study, we aimed to investigate the phylogenetic distribution, structure and function of fern hydathodes. METHODS: We performed a global review on fern hydathodes and their phylogenetic distribution, carried out an ancestral character state reconstruction, and studied the structure, guttation and elemental composition of salt residues of eight species, and the diurnal patterns of xylem pressure of two species. KEY RESULTS: Hydathodes are known from 1189 fern species, 92 genera and 19 families of 2 orders, Equisetales and Polypodiales. Stochastic character mapping indicated multiple gains and losses of hydathodes at the genus level, occurring especially during the last 50 million years of fern evolution. Hydathodes were located on the adaxial leaf surface and characterized by a cytoplasm-rich, pore-free epidermis, and became functional for several weeks after nearly complete leaf expansion. In two species, positive xylem pressure built up at night, potentially facilitating guttation. Guttation fluid was rich in Ca and often Si, but also contained P, Mg, Na and Al. CONCLUSIONS: Stochastic character mapping and the structural and functional diversity of hydathodes indicate multiple origins, and their presence/absence in closely related taxa implies secondary losses during fern evolution. Positive xylem pressure and high air humidity play an important role as drivers of guttation. Hydathodes may contribute to the regulation of leaf nutrient stoichiometry by the release of excessive compounds and minerals other than waste products, but the presence of essential chemical elements in salt residues also indicates possible leakage.

Nanoparticles are linked to polar lipids in xylem sap of temperate angiosperm species.

In previous research, xylem sap of angiosperms has been found to include low concentrations of nanoparticles and polar lipids. A major goal of this study was to test predictions arising from the hypothesis that the nanoparticles consist largely of polar lipids from the original cell content of vessel elements. These predictions included that polar lipid and nanoparticle concentrations would be correlated, that they both do not pass through pit membranes and that they do not vary seasonally because they originate from living vessel element cells. We collected xylem sap of six temperate angiosperm species over the whole year to consider seasonal variation. Concentrations of nanoparticles and lipids in xylem sap and contamination control samples were measured with a NanoSight device and mass spectrometry. We found that the concentration of nanoparticles and polar lipids was (i) diluted when an increasing amount of sap was extracted, (ii) significantly correlated to each other for three species, (iii) affected by vessel anatomy, (iv) very low and largely different in chemical composition from contamination controls and (v) hardly variable among seasons. Moreover, there was a minor freezing-thawing effect with respect to nanoparticle amount and size. Xylem sap lipids included polar galactolipids and phospholipids in all species and neutral triacylglycerols in two species. These findings support the predictions and, by implication, the underlying hypothesis that nanoparticles in xylem sap consist of polar lipids from the original cell content of living vessel element cells. Further research is needed to examine the formation and stability of nanoparticles concerning lipid composition and multiphase interactions among gas, liquid and solid phases in xylem conduits of living plants.

A User Manual to Measure Gas Diffusion Kinetics in Plants: Pneumatron Construction, Operation, and Data Analysis.

The Pneumatron device measures gas diffusion kinetics in the xylem of plants. The device provides an easy, low-cost, and powerful tool for research on plant water relations and gas exchange. Here, we describe in detail how to construct and operate this device to estimate embolism resistance of angiosperm xylem, and how to analyse pneumatic data. Simple and more elaborated ways of constructing a Pneumatron are shown, either using wires, a breadboard, or a printed circuit board. The instrument is based on an open-source hardware and software system, which allows users to operate it in an automated or semi-automated way. A step-by-step manual and a troubleshooting section are provided. An excel spreadsheet and an R-script are also presented for fast and easy data analysis. This manual aims at helping users to avoid common mistakes, such as unstable measurements of the minimum and maximum amount of gas discharged from xylem tissue, which has major consequences for estimating embolism resistance. Major advantages of the Pneumatron device include its automated and accurate measurements of gas diffusion rates, including highly precise measurements of the gas volume in intact, embolised conduits. It is currently unclear if the method can also be applied to woody monocots, gymnosperm species that possess torus-margo pit membranes, or to herbaceous species.

Pore constrictions in intervessel pit membranes provide a mechanistic explanation for xylem embolism resistance in angiosperms.

Embolism spreading in angiosperm xylem occurs via mesoporous pit membranes between vessels. Here, we investigate how the size of pore constrictions in pit membranes is related to pit membrane thickness and embolism resistance. Pit membranes were modelled as multiple layers to investigate how pit membrane thickness and the number of intervessel pits per vessel determine pore constriction sizes, the probability of encountering large pores, and embolism resistance. These estimations were complemented by measurements of pit membrane thickness, embolism resistance, and number of intervessel pits per vessel in stem xylem (n = 31, 31 and 20 species, respectively). The modelled constriction sizes in pit membranes decreased with increasing membrane thickness, explaining the measured relationship between pit membrane thickness and embolism resistance. The number of pits per vessel affected constriction size and embolism resistance much less than pit membrane thickness. Moreover, a strong relationship between modelled and measured embolism resistance was observed. Pore constrictions provide a mechanistic explanation for why pit membrane thickness determines embolism resistance, which suggests that hydraulic safety can be uncoupled from hydraulic efficiency. Although embolism spreading remains puzzling and encompasses more than pore constriction sizes, angiosperms are unlikely to have leaky pit membranes, which enables tensile transport of water.

A Study of Thermistor Performance within a Textile Structure.

Textiles provide an ideal structure for embedding sensors for medical devices. Skin temperature measurement is one area in which a sensor textile could be particularly beneficial; pathological skin is normally very sensitive, making the comfort of anything placed on that skin paramount. Skin temperature is an important parameter to measure for a number of medical applications, including for the early detection of diabetic foot ulcer formation. To this end an electronic temperature-sensor yarn was developed by embedding a commercially available thermistor chip into the fibres of a yarn, which can be used to produce a textile or a garment. As part of this process a resin was used to encapsulate the thermistor. This protects the thermistor from mechanical and chemical stresses, and also allows the sensing yarn to be washed. Building off preliminary work, the behaviour and performance of an encapsulated thermistor has been characterised to determine the effect of encapsulation on the step response time and absolute temperature measurements. Over the temperature range of interest only a minimal effect was observed, with step response times varying between 0.01-0.35 s. A general solution is presented for the heat transfer coefficient compared to size of the micro-pod formed by the encapsulation of the thermistor. Finally, a prototype temperature-sensing sock was produced using a network of sensing yarns as a demonstrator of a system that could warn of impending ulcer formation in diabetic patients.

Intermittent aeration to improve wastewater treatment efficiency in pilot-scale constructed wetland.

Forced aeration of horizontal subsurface flow constructed wetlands (HSSF CWs) is nowadays a recognized method to improve treatment efficiency, mainly in terms of ammonium removal. While numerous investigations have been reported testing constant aeration, scarce information can be found about the efficiency of intermittent aeration. This study aims at comparing continuous and intermittent aeration, establishing if there is an optimal regime that will increase treatment efficiency of HSSF CWs whilst minimizing the energy requirement. Full and intermittent aeration were tested in a pilot plant of three HSSF CWs (2.64m(2) each) fed with primary treated wastewater. One unit was fully aerated; one intermittently aerated (i.e. by setting a limit of 0.5mg/L dissolved oxygen within the bed) with the remaining unit not aerated as a control. Results indicated that intermittent aeration was the most successful operating method. Indeed, the coexistence of aerobic and anoxic conditions promoted by the intermittent aeration resulted in the highest COD (66%), ammonium (99%) and total nitrogen (79%) removals. On the other hand, continuous aeration promotes ammonium removal (99%), but resulted in nitrate concentrations in the effluent of up to 27mg/L. This study demonstrates the high potential of the intermittent aeration to increase wastewater treatment efficiency of CWs providing an extreme benefit in terms of the energy consumption.

Capillary Penetration into Inclined Circular Glass Tubes.

The spontaneous penetration of a wetting liquid into a vertical tube against the force of gravity and the imbibition of the same liquid into a horizontal tube (or channel) are both driven by capillary forces and described by the same fundamental equations. However, there have been few experimental studies of the transition from one orientation to the other. We report systematic measurements of capillary penetration of polydimethylsiloxane oils of viscosities 9.6, 19.2, and 48.0 mPa·s into glass capillary tubes. We first report the effect of tube radii R between 140 and 675 µm on the dynamics of spontaneous imbibition. We show that the data can be fitted using the exact numerical solution to the governing equations and that these are similar to fits using the analytical viscogravitational approximation. However, larger diameter tubes show a rate of penetration slower than expected using an equilibrium contact angle and the known value of liquid viscosity. To account for the slowness, an increase in viscosity by a factor (η/ρ)(scaling) is needed. We show full agreement with theory requires the ratio R/κ(-1) ∼ 0.1 or less, where κ(-1) is the capillary length. In addition, we propose an experimental method that enables the determination of the dynamic contact angle during imbibition, which gives values that agree with the literature values. We then report measurements of dynamic penetration into the tubes of R = 190 and 650 µm for a range of inclination angles to the horizontal, φ, from 5 to 90°. We show that capillary penetration can still be fitted using the viscogravitational solution, rather than the Bosanquet solution which describes imbibition without gravity, even for inclination angles as low as 10°. Moreover, at these low angles, the effect of the tube radius is found to diminish and this appears to relate to an effective capillary length, κ(-1)(φ) = (γ(LV)/ρg sin φ)(1/2).

Dielectrophoresis-driven spreading of immersed liquid droplets.

In recent years electrowetting-on-dielectric (EWOD) has become an effective tool to control partial wetting. EWOD uses the liquid-solid interface as part of a capacitive structure that allows capacitive and interfacial energies to adjust by changes in wetting when the liquid-solid interface is charged due to an applied voltage. An important aspect of EWOD has been its applications in microfluidics in chemistry and biology and in optical devices and displays in physics and engineering. Many of these rely on the use of a liquid droplet immersed in a second liquid due to the need either for neutral buoyancy to overcome gravity and shield against impact shocks or to encapsulate the droplet for other reasons, such as in microfluidic-based DNA analyses. Recently, it has been shown that nonwetting oleophobic surfaces can be forcibly wetted by nonconducting oils using nonuniform electric fields and an interface-localized form of liquid dielectrophoresis (dielectrowetting). Here we show that this effect can be used to create films of oil immersed in a second immiscible fluid of lower permittivity. We predict that the square of the thickness of the film should obey a simple law dependent on the square of the applied voltage and with strength dependent on the ratio of difference in permittivity to the liquid-fluid interfacial tension, Δε/γ(LF). This relationship is experimentally confirmed for 11 liquid-air and liquid-liquid combinations with Δε/γ(LF) having a span of more than two orders of magnitude. We therefore provide fundamental understanding of dielectrowetting for liquid-in-liquid systems and also open up a new method to determine liquid-liquid interfacial tensions.