In situ magnesiothermic reduction synthesis of a Ge@C composite for high-performance lithium-ion batterie anodes.

Metallothermic, especially magnesiothermic, solid-state reactions have been widely applied to synthesize various materials. However, further investigations regarding the use of this method for composite syntheses are needed because of the high reactivity of magnesium. Herein, we report an in situ magnesiothermic reduction to synthesize a composite of Ge@C as an anode material for lithium-ion batteries. The obtained electrode delivered a specific capacity of 454.2 mAh·g-1 after 200 cycles at a specific current of 1000 mA·g-1. The stable electrochemical performance and good rate performance of the electrode (432.3 mAh·g-1 at a specific current of 5000 mA·g-1) are attributed to the enhancement in distribution and chemical contact between Ge nanoparticles and the biomass-based carbon matrix. A comparison with other synthesis routes has been conducted to demonstrate the effectiveness of contact formation during in situ synthesis.

One-pot synthesis of S-scheme MoS2/g-C3N4 heterojunction as effective visible light photocatalyst.

Despite pioneering as the holy grail in photocatalysts, abundant reports have demonstrated that g-C3N4 performs poor photocatalytic activity due to its high recombination rate of photo-induced charge carriers. Many efforts have been conducted to overcome this limitation in which the semiconductor-semiconductor coupling strategies toward heterojunction formation were considered as the easiest but the most effective method. Herein, a one-pot solid-state reaction of thiourea and sodium molybdate as precursors at different temperatures under N2 gas was applied for preparing composites of MoS2/g-C3N4. The physicochemical characterization of the final products determines the variation in contents of components (MoS2 and g-C3N4) via the increase of synthesis temperature. The enhanced photocatalytic activity of the MoS2/g-C3N4 composites was evaluated by the degradation of Rhodamine B in an aqueous solution under visible light. Therein, composites synthesized at 500 °C showed the best photocatalytic performance with a degradation efficiency of 90%, much higher than that of single g-C3N4. The significant improvement in photocatalytic performance is attributed to the enhancement in light-harvesting and extension in photo-induced charge carriers' lifetime of composites which are originated from the synergic effect between the components. Besides, the photocatalytic mechanism is demonstrated to well-fit into the S-scheme pathway with apparent evidences.

Sub-micro droplet reactors for green synthesis of Li3VO4 anode materials in lithium ion batteries.

The conventional solid-state reaction suffers from low diffusivity, high energy consumption, and uncontrolled morphology. These limitations are competed by the presence of water in solution route reaction. Herein, based on concept of combining above methods, we report a facile solid-state reaction conducted in water vapor at low temperature along with calcium doping for modifying lithium vanadate as anode material for lithium-ion batteries. The optimized material, delivers a superior specific capacity of 543.1, 477.1, and 337.2 mAh g-1 after 200 and 1000 cycles at current densities of 100, 1000 and 4000 mA g-1, respectively, which is attributed to the contribution of pseudocapacitance. In this work, we also use experimental and theoretical calculation to demonstrate that the enhancement of doped lithium vanadate is attributed to particles confinement of droplets in water vapor along with the surface and structure variation of calcium doping effect.

Facile Green Synthesis of Pseudocapacitance-Contributed Ultrahigh Capacity Fe2(MoO4)3 as an Anode for Lithium-Ion Batteries.

The investigation into the use of earth-abundant elements as electrode materials for lithium-ion batteries (LIBs) is becoming more urgent because of the high demand for electric vehicles and portable devices. Herein, a new green synthesis strategy, based on a facile solid-state reaction with the assistance of water droplets' vapor, was conducted to prepare Fe2(MoO4)3 nanosheets as anode materials for LIBs. The obtained sample possesses a two-dimensional stacked nanosheet construction with open gaps providing a much higher surface area compared to the bulk sample conventionally synthesized. The nanosheet sample delivers an ultrahigh reversible capacity (1983.6 mA h g-1) at a current density of 100 mA g-1 after 400 cycles, which could be related to the contribution of pseudocapacitance. The enhancement in cyclability and rated performance with an interesting increased capacity could be caused by the effect of electrochemical milling and the in situ formation of metallic particles in its lithium-ion storage mechanism.

A Facile Synthesis of MoS2/g-C3N4 Composite as an Anode Material with Improved Lithium Storage Capacity.

The demand for well-designed nanostructured composites with enhanced electrochemical performance for lithium-ion batteries electrode materials has been emerging. In order to improve the electrochemical performance of MoS2-based anode materials, MoS2 nanosheets integrated with g-C3N4 (MoS2/g-C3N4 composite) was synthesized by a facile heating treatment from the precursors of thiourea and sodium molybdate at 550 °C under N2 gas flow. The structure and composition of MoS2/g-C3N4 were confirmed by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, infrared spectroscopy, X-ray photoelectron spectroscopy, thermogravimetric analysis and elemental analysis. The lithium storage capability of the MoS2/g-C3N4 composite was evaluated, indicating high capacity and stable cycling performance at 1 C (A·g-1) with a reversible capacity of 1204 mA·h·g-1 for 200 cycles. This result is believed the role of g-C3N4 as a supporting material to accommodate the volume change and improve charge transport for nanostructured MoS2. Additionally, the contribution of the pseudocapacitive effect was also calculated to further clarify the enhancement in Li-ion storage performance of the composite.