Trophoblast stem cells, trophoblast invasion, and organoids - advancements in gynecology.

The human placenta serves as a vital barrier between the mother and the developing fetus during pregnancy. A defect in the early development of the placenta is associated with severe pregnancy disorders. Despite its complex development, various molecular processes control placental development, and the specialization of trophoblast cells is still not fully understood. One primary obstacle is the lack of suitable cell model systems. Traditional two-dimensional (2D) cell cultures fail to mimic in vivo conditions and do not capture the intricate intercellular interactions vital for studying placental development. However, three-dimensional (3D) organoid models derived from stem cells that replicate natural cell organization and architecture have greatly improved our understanding of trophoblast behavior and its medicinal applications. Organoids with relevant phenotypes provide a valuable platform to model both placental physiology and pathology, including the modeling of placental disorders. They hold great promise for personalized medicine, improved diagnostics, and the evaluation of pharmaceutical drug efficacy and safety. This article provides a concise overview of trophoblast stem cells, trophoblast invasion, and the evolving role of organoids in gynecology.

Human Chondrocytes, Metabolism of Articular Cartilage, and Strategies for Application to Tissue Engineering.

Hyaline cartilage, which is characterized by the absence of vascularization and innervation, has minimal self-repair potential in case of damage and defect formation in the chondral layer. Chondrocytes are specialized cells that ensure the synthesis of extracellular matrix components, namely type II collagen and aggregen. On their surface, they express integrins CD44, α1ß1, α3ß1, α5ß1, α10ß1, αVß1, αVß3, and αVß5, which are also collagen-binding components of the extracellular matrix. This article aims to contribute to solving the problem of the possible repair of chondral defects through unique methods of tissue engineering, as well as the process of pathological events in articular cartilage. In vitro cell culture models used for hyaline cartilage repair could bring about advanced possibilities. Currently, there are several variants of the combination of natural and synthetic polymers and chondrocytes. In a three-dimensional environment, chondrocytes retain their production capacity. In the case of mesenchymal stromal cells, their favorable ability is to differentiate into a chondrogenic lineage in a three-dimensional culture.

Evaluation of Biocompatibility of PLA/PHB/TPS Polymer Scaffolds with Different Additives of ATBC and OLA Plasticizers.

One of the blends that is usable for 3D printing while not being toxic to cell cultures is the lactic acid (PLA)/polyhydroxybutyrate (PHB)/thermoplastic starch (TPS) blend. The addition of plasticizers can change the rate of biodegradation and the biological behavior of the material. In order to evaluate the potential of the PLA/PHB/TPS material in combination with additives (plasticizers: acetyl tributyl citrate (ATBC) and oligomeric lactic acid (OLA)), for use in the field of biomedical tissue engineering, we performed a comprehensive in vitro characterization of selected mixture materials. Three types of materials were tested: I: PLA/PHB/TPS + 25% OLA, II: PLA/PHB/TPS + 30% ATBC, and III: PLA/PHB/TPS + 30% OLA. The assessment of the biocompatibility of the materials included cytotoxicity tests, such as monitoring the viability, proliferation and morphology of cells and their deposition on the surface of the materials. The cell line 7F2 osteoblasts (Mus musculus) was used in the experiments. Based on the test results, the significant influence of plasticizers on the material was confirmed, with their specific proportions in the mixtures. PLA/PHB/TPS + 25% OLA was evaluated as the optimal material for biocompatibility with 7F2 osteoblasts. The tested biomaterials have the potential for further investigation with a possible change in the proportion of plasticizers, which can have a fundamental impact on their biological properties.

The WC and CrC Coatings Deposited from Carbonyls Using PE CVD Method-Structure and Properties.

This article presents a comparative study of WC and CrC coatings deposited by the plasma-enhanced chemical vapor method using the hexacarbonyls of W and Cr as precursors. The measured thicknesses of the WC and CrC coatings are equal to ca. 1.5 µm. The WC coating consists of microcolumns with a conical end, with gaps between the microcolumns up to approximately 100 nm, and their structure is formed by nanoparticles in the shape of globules with a diameter of up to 10 nm. In the case of the CrC coating, a cauliflower structure with gaps ranging from 20 to 100 nm was achieved. The diameter of cauliflower grains is from 50 nm to 300 nm. The C content in the WC and CrC coating is 66.5 at.% and 75.5 at.%. The W content is 1.4 at.% and the Cr content in the CrC coating is 1.2 at.%. The hardness and Young's modulus of the WC coating are equal to 9.2 ± 1.2 GPa 440.2 ± 14.2 GPa, respectively. The coefficients of friction and wear volume of the WC coating are equal to 0.7 and -1.6 × 106/+3.3 × 106 µm3, respectively. The hardness and Young's modulus of the CrC coating are 7.5 ± 1.2 GPa and 280 ± 18.5 GPa, respectively. The coefficients of friction and wear volume of the CrC coating are 0.72 and -18.84 × 106/+0.35 × 106 µm3, respectively.

Biodegradable Materials for Tissue Engineering: Development, Classification and Current Applications.

The goal of this review is to map the current state of biodegradable materials that are used in tissue engineering for a variety of applications. At the beginning, the paper briefly identifies typical clinical indications in orthopedics for the use of biodegradable implants. Subsequently, the most frequent groups of biodegradable materials are identified, classified, and analyzed. To this end, a bibliometric analysis was applied to evaluate the evolution of the scientific literature in selected topics of the subject. The special focus of this study is on polymeric biodegradable materials that have been widely used for tissue engineering and regenerative medicine. Moreover, to outline current research trends and future research directions in this area, selected smart biodegradable materials are characterized, categorized, and discussed. Finally, pertinent conclusions regarding the applicability of biodegradable materials are drawn and recommendations for future research are suggested to drive this line of research forward.

Impact of In Vitro Degradation on the Properties of Samples Produced by Additive Production from PLA/PHB-Based Material and Ceramics.

The present study deals with preparing a polymer-based material with incorporated ceramics and monitoring changes in properties after in vitro natural degradation. The developed material is a mixture of polymers of polylactic acid and polyhydroxybutyrate in a ratio of 85:15. Ceramic was incorporated into the prepared material, namely 10% hydroxyapatite and 10% tricalcium phosphate of the total volume. The material was processed into a filament form, and types of solid and porous samples were prepared using additive technology. These samples were immersed in three different solutions: physiological solution, phosphate-buffered saline, and Hanks' solution. Under constant laboratory conditions, changes in solution pH, material absorption, weight loss, changes in mechanical properties, and surface morphology were monitored for 170 days. The average value of the absorption of the solid sample was 7.07%, and the absorption of the porous samples was recorded at 8.33%, which means a difference of 1.26%. The least change in pH from the reference value of 7.4 was noted with the phosphate-buffered saline solution. Computed tomography was used to determine the cross-section of the samples. The obtained data were used to calculate the mechanical properties of materials after degradation. The elasticity modulus for both the full and porous samples degraded in Hanks' solution (524.53 ± 13.4 MPa) has the smallest deviation from the non-degraded reference sample (536.21 ± 22.69 MPa).

Interaction between Mesenchymal Stem Cells and the Immune System in Rheumatoid Arthritis.

Rheumatoid arthritis (RA) is an autoimmune disease that causes damage to joints. This review focuses on the possibility of influencing the disease through immunomodulation by mesenchymal stem cells (MSCs). There is an occurrence of rheumatoid factor and RA-specific autoantibodies to citrullinated proteins in most patients. Citrulline proteins have been identified in the joints of RA patients, and are considered to be the most suitable candidates for the stimulation of anti-citrulline protein antibodies production. Fibroblast-like proliferating active synoviocytes actively promote inflammation and destruction in the RA joint, in association with pro-inflammatory cells. The inflammatory process may be suppressed by MSCs, which are a population of adherent cells with the following characteristic phenotype: CD105+, CD73+, CD90+, CD45-, CD34- and HLA DR-. Following the stimulation process, MSCs are capable of immunomodulatory action through the release of bioactive molecules, as well as direct contact with the cells of the immune system. Furthermore, MSCs show the ability to suppress natural killer cell activation and dendritic cells maturation, inhibit T cell proliferation and function, and induce T regulatory cell formation. MSCs produce factors that suppress inflammatory processes, such as PGE2, TGF-ß, HLA-G5, IDO, and IL-10. These properties suggest that MSCs may affect and suppress the excessive inflammation that occurs in RA. The effect of MSCs on rheumatoid arthritis has been proven to be a suitable alternative treatment thanks to successful experiments and clinical studies.

In Vitro Model of Human Trophoblast in Early Placentation.

The complex process of placental implantation and development affects trophoblast progenitors and uterine cells through the regulation of transcription factors, cytokines, adhesion receptors and their ligands. Differentiation of trophoblast precursors in the trophectoderm of early ontogenesis, caused by the transcription factors, such as CDX2, TEAD4, Eomes and GATA3, leads to the formation of cytotrophoblast and syncytiotrophoblast populations. The molecular mechanisms involved in placental formation inside the human body along with the specification and differentiation of trophoblast cell lines are, mostly due to the lack of suitable cell models, not sufficiently elucidated. This review is an evaluation of current technologies, which are used to study the behavior of human trophoblasts and other placental cells, as well as their ability to represent physiological conditions both in vivo and in vitro. An in vitro 3D model with a characteristic phenotype is of great benefit for the study of placental physiology. At the same time, it provides great support for future modeling of placental disease.

The Effect of Annealing Temperatures on Selected Properties of WC/C Coatings, Deposited Using Hexacarbonyl Wolfram in an N2-SiH4 Atmosphere.

In this paper, we present the results of an experimental study on WC/C coatings, deposited by using plasma-enhanced chemical vapor deposition in an N2-SiH4 atmosphere, annealed at temperatures of 200, 500 and 800 °C, in which the hexacarbonyl of W was used as a precursor. During the experiments, the topography, chemical composition, morphology, as well as selected mechanical properties, such as hardness, Young's modulus, and coefficient of friction of the WC/C coatings were analyzed. Annealing without the protective atmosphere in the mentioned temperatures caused a decrease in hardness (up to 15 ± 2.7 GPa). In addition, the coefficient of friction value increased only to 0.37 ± 0.03.

In Vitro Degradation of Specimens Produced from PLA/PHB by Additive Manufacturing in Simulated Conditions.

Biopolymers have been the most frequently studied class of materials due to their biodegradability, renewability, and sustainability. The main aim of the presented study was to evaluate degradability of the polymer material blend which was immersed in different solutions. The present study included the production of three different mixtures of polylactic acid and polyhydroxybutyrate, each with a different content of triacetin, which was used as a plasticiser. Applying 3D printing technology, two types of cylindrical specimen were produced, i.e., a solid and a porous specimen, and subjected to in vitro natural degradation. The biodegradation process ran for 195 days in three different solutions (saline, phosphate-buffered saline (PBS), and Hank's solution) in stable conditions of 37 °C and a pH of 7.4, while the specimens were kept in an orbital motion to simulate the flow of fluids. The goal was to identify the effects of a solution type, specimen shape and material composition on the biodegradation of the materials. The monitored parameters included changes in the solution quantity absorbed by the specimens; morphological changes in the specimen structure; and mechanical properties. They were measured by compressive testing using the Inspekt5 Table Blue testing device. The experiment revealed that specimen porosity affected the absorption of the solutions. The non-triacetin materials exhibited a higher mechanical resistance to compression than the materials containing a plasticiser. The final result of the experiment indicated that the plasticiser-free specimens exhibited higher values of solution absorption, no formation of block cracks or bubbles, and the pH values of the solutions in which these materials were immersed remained neutral for the entire experiment duration; furthermore, these materials did not reduce pH values down to the alkaline range, as was the case with the solutions with the plasticiser-containing materials. Generally, in applications where high mechanical resistance, earlier degradation, and more stable conditions are required, the use of non-plasticiser materials is recommended.

Innovative approaches to designing and manufacturing a prosthetic thumb.

CASE DESCRIPTION: Conventional methods for producing custom prosthetic fingers are time-consuming, can be uncomfortable for the patient, and require a skilled prosthetist. The subject was a 40-year-old male with congenital absence of the thumb and related metacarpal bone on the right non-dominant hand, anomaly of the lengths of individual upper limb segments, and contracture of the elbow joint. This hand presentation made it impossible for him to perform thumb opposition, which is a very important function for common daily activities. OBJECTIVE: The goal was to design an individual passive thumb prosthesis using free open-source software, 3D scanning technology, and additive manufacturing methods (i.e., fused filament fabrication). STUDY DESIGN: Case report. TREATMENT: Artificial thumb prostheses with two types of bases and fastening interfaces were designed and manufactured. One combination was chosen as the best alternative. OUTCOMES: The shape, positioning, firmness, and fastening of the prosthesis were compliant enough for the patient to be able to hold objects with his healthy fingers and artificial thumb. This innovative approach to fabrication of a custom thumb prosthesis provided considerable advantages in terms of custom sizing, manufacturing time, rapid production, iteration, comfort, and costs when compared to conventional methods of manufacturing a hand prosthesis. CONCLUSION: The methodology of designing and manufacturing a prosthetic thumb using 3D scanning and additive manufacturing technologies have been demonstrated to be adequate from a practical point of view. These technologies show potential for use in the practice of prosthetics.

Microstructure and Mechanical Properties of Annealed WC/C PECVD Coatings Deposited Using Hexacarbonyl of W with Different Gases.

The present work studies the tungsten carbide (WC/C) coatings deposited by using Plasma Enhanced Chemical Vapor Deposition (PECVD), with and without gases of Ar and N2. Volatile hexacarbonyl of W was used as a precursor. Their mechanical and tribological properties were evaluated. The following values were obtained by using deposition process with N2 of HIT = 19.7 ± 4.1 GPa, EIT = 221 ± 2.1 GPa, and coefficient of friction (COF) = 0.35 ± 0.09. Secondly, deposition without the aforementioned gas obtained values of HIT = 20.9 ± 2 GPa, EIT = 292 ± 20 GPa, and COF = 0.69 ± 0.05. WC/C coatings were annealed at temperatures of 200, 500, and 800 °C, respectively. Evaluated factors include the introduced properties, the observed morphology, and the structural composition of WC/C coatings. The process of degradation was carried out by using various velocities, depending on used gases and annealing temperatures.

Application of holographic interferometry in the analysis of stress states in a crack root area.

This paper deals with the visualization and analysis of interaction of a cutting wedge disintegrator with plastic at low loads. For exploratory research, a contactless optical holographic interferometry method was used, allowing a comprehensive picture of the stress state when opening microcracks. An experimental model was set up for the purposes of the research. The structure of the model as well as its geometric parameters had to comply with the applied optical method. The method of holographic interferometry enabled us to record even the initial stages of the crack. Pictures of holographic interferograms allowed us to observe stress fields on the cutting wedge as well as on the loaded body in the form of interference fringes. In order to record the interferograms, we used the method of two exposures so that we gained double-exposure interferograms, which represent the state of the object during the second exposure. The first exposure was caused by superposition of object-related and reference wave after the object was subjected to a load; the second exposure occurred after the load was removed. We used quantitative analysis to determine stress intensity coefficients from holographic interferograms as followed by the calculation of stresses with respect to axes $x$x and $y$y. The analysis was done for loading forces 1.57 N and 3.14 N. As the load applied to the cutting material was increasing, the density of interference fringes was increasing, too.

Effects of docetaxel, doxorubicin and cyclophosphamide on human breast cancer cell line MCF-7.

BACKGROUND: Cell viability assays are important tools in oncological research. The purpose of this study was to evaluate the effect of docetaxel, doxorubicin and cyclophosphamide on the metabolic activity of MCF-7 breast cancer cell line. MATERIALS AND METHODS: Antiproliferative effect of cytostatics on MCF-7 cells was measured using the standard colorimetric test. The MCF-7 cell line was exposed to cytostatics for 24 hours. The metabolic activity was evaluated over the 24 hours. RESULTS: According to the statistical analysis, the change in the growth rate was significant (p<0.05) for the 120 nM docetaxel and above the 200 nM doxorubicin treatment in comparison with sensitive MCF-7 cells. When considering drugs in combination (60 nM docetaxel with 200 nM doxorubicin and 60 nM docetaxel with 500 nM doxorubicin) after the addition of 600 nM cyclophosphamide, we found a statistically significant decrease of metabolic activity of the MCF-7 cell line (p<0.05). CONCLUSION: Cyclophosphamide at 600 nM seems to enhance the influence of docetaxel when combined with doxorubicin.

The role of the -427T/C apolipoprotein E promoter polymorphism in the pathogenesis of Alzheimer's disease, vascular dementia and mixed dementia.

In this work, we explored the existence of genetic variant within the apolipoprotein E gene transcriptional regulatory region. Upon a population study, three polymorphic sites (-491, -427 and -219) and two mutations were found. We investigated newly reported -427T/C promoter polymorphism in association with sporadic Alzheimer's disease (AD), vascular (VD) and mixed dementia (MD) along with APOE genotype and gender. Observed polymorphisms were investigated in 267 subjects, 122 of them formed a control group, the group of patients consisted of 145 subjects. Sixty patients were diagnosed with AD, 41 patients were diagnosed with VD and 35 patients left were diagnosed with MD in Slovak Caucasians (Central Europe). Gene-gene interaction analysis showed increase of the risk to develop AD in subjects carrying both the at least one C allele and the APOE E4 allele (OR = 17.93, 95%CI = 3.50-171.54).