Orientation of human osteoblasts on hydroxyapatite-based microchannels.

The effect of calcium phosphate-based microchannels on the growth and orientation of human osteoblast cells is investigated in this study. As substrates, hydroxyapatite-based microchannels with high contouring accuracy were fabricated by a novel micro-moulding technique. Microchannels obtained by this method featured widths ranging from 16.0±0.7 to 76.6±1.4 µm and depths from 7.9±0.8 to 15.5±1.3 µm. Surface and contour characterization was carried out using X-ray diffraction analysis, scanning electron microscopy imaging and 3D-confocal profilometry. Cell activity and alignment on microchannels with different widths were determined after 1 and 3 days by photometric spectroscopy and fluorescence microscopic imaging and statistically analysed by Tukey's multiple comparison test. On days 1 and 3 for microchannels of width 16 and 30 µm, 70-80% of the osteoblasts oriented within an angular range of 0-15° relative to the microchannel direction. Interestingly, only 20% of the cells grew inside the microchannels for channel widths of 16 and 30 µm. Substrates with channel widths of 45, 65 and 76 µm allowed ∼40% of the cells to grow inside. The depth of the microchannel showed hardly any significant impact. All micropatterned surfaces provoked a good cell attachment, as flat and spread cell morphologies with lamellipodiae and filopodiae could already be observed after 1 day. The effect of the microchannels on osteoblast activity was determined using the colorimetric WST-1 assay. In addition, the cell differentiation was assessed by collagen type I staining. The cell activity obtained by WST-1 assay differed insignificantly for all micropatterned samples of various widths and depths. The assessment of collagen type I yielded the same amounts for all micropatterned samples after 1, 3 and 7 days. In summary, the microchannel width of HA-based patterns has a distinct effect on the directed growth of human osteoblast cells, allowing novel design strategies for surfaces such as dental implants.

The nacre protein perlucin nucleates growth of calcium carbonate crystals.

Atomic force microscopy (AFM) in aqueous solution was used to investigate native nacre of the marine snail Haliotis laevigata on the microscopic scale and the interaction of purified nacre proteins with calcium carbonate crystals on the nanoscopic scale. These investigations were controlled by scanning electron microscopy (SEM), light microscopy (LM) and biochemical methods. For investigations with AFM and SEM, nacre was cleaved parallel to the aragonite tablets in this biogenic polymer/mineral composite. Multilamellar organic sheets consisting of a core of chitin with layers of proteins attached on both sides lay between the aragonite layers consisting of confluent aragonite tablets. Cleavage appeared to occur between the aragonite tablet layer and the protein layer. AFM images revealed a honeycomb-like structure to the organic material with a diameter of the 'honeycombs' equalling that of the aragonite tablets. The walls of the structures consisted of filaments, which were suggested to be collagen. The flat regions of the honeycomb-like structures exhibited a hole with a diameter of more than 100 nm. When incubated in saturated calcium carbonate solution, aragonite needles with perfect vertical orientation grew on the proteinacous surface. After treatment with proteinase K, no growth of orientated aragonite needles was detected. Direct AFM measurements on dissolving and growing calcite crystals revealed a surface structure with straight steps the number of which decreased with crystal growth. When the purified nacre protein perlucin was added to the growth solution (a super-saturated calcium carbonate solution) new layers were nucleated and the number of steps increased. Anion exchange chromatography of the water-soluble proteins revealed a mixture of about 10 different proteins. When this mixture was dialysed against saturated calcium carbonate solution and sodium chloride, calcium carbonate crystals precipitated together with perlucin leaving the other proteins in the supernatant. Thus perlucin was shown to be a protein able to nucleate calcium carbonate layers on calcite surfaces, and in the presence of sodium chloride, is incorporated as an intracrystalline protein into calcium carbonate crystals.