Acoustic Droplet Vaporization of Perfluorohexane Emulsions Induced by Heterogeneous Nucleation at an Ultrasonic Frequency of 1.1 MHz.

Droplets made of liquid perfluorocarbon undergo a phase transition and transform into microbubbles when triggered by ultrasound of intensity beyond a critical threshold; this mechanism is called acoustic droplet vaporization (ADV). It has been shown that if the intensity of the signal coming from high ultrasonic harmonics are sufficiently high, superharmonic focusing is the mechanism leading to ADV for large droplets (>3 µm) and high frequencies (>1.5 MHz). In such a scenario, ADV is initiated due to a nucleus occurring at a specific location inside the droplet volume. But the question on what induces ADV in the case of nanometer-sized droplets and/or at low ultrasonic frequencies (<1.5 MHz) still remains. We investigated ADV of perfluorohexane (PFH) nano- and microdroplets at a frequency of 1.1 MHz and at conditions where there is no superharmonic focusing. Three types of droplets produced by microfluidics were studied: plain PFH droplets, PFH droplets containing many nanometer-sized water droplets, and droplets made of a PFH corona encapsulating a single micron-sized water droplet. The probability to observe a vaporization event was measured as a function of acoustic pressure. As our experiments were performed on droplet suspensions containing a population of monodisperse droplets, we developed a statistical model to extrapolate, from our experimental curves, the ADV pressure thresholds in the case where only one droplet would be insonified. We observed that the value of ADV pressure threshold decreases as the radius of a plain PFH droplet increases. This value was further reduced when a PFH droplet encapsulates a micron-sized water droplet, while the encapsulation of many nanometer-sized water droplets did not modify the threshold. These results cannot be explained by a model of homogeneous nucleation. However, we developed a heterogeneous nucleation model, where the nucleus appears at the surface in contact with PFH, that successfully predicts our experimental ADV results.

Transition kinetics of mixed lipid:photosurfactant assemblies studied by time-resolved small angle X-ray scattering.

HYPOTHESIS: Photoswitchable surfactants are used in the design of many light-responsive colloids and/or self-assemblies. Photo-isomerization enables to control molecular equilibrium, and triggers transient reorganizations with possibly out-of-equilibrium intermediate states that have been overlooked. Here, we address this question by an in depth structural investigation of intermediate lipid-surfactant assemblies that occur during fast isothermal photo-triggered transition in lipid:surfactant mixtures. EXPERIMENTS: The structural parameters of mixed assemblies of azobenzene-containing cationic surfactant (AzoTMA) and dioleoylphosphatidylcholine (DOPC) lipids were studied by light scattering and time-resolved small angle X-ray scattering. Structural and compositional information about the assemblies and unimers in bulk were determined at the photostationary states, as well as at intermediate kinetic states formed during UV or blue light illumination. FINDINGS: DOPC:AzoTMA systems form mixed assemblies representative of phospholipid:cationic surfactant mixtures, that evolve from spheroid, to rod-like micelles, and vesicles with increasing DOPC fraction. Transient assemblies detected during the photo-triggered kinetics are similar to the ones found in stationary states. But changes of AzoTMA unimers in bulk can be considerably faster than mass reorganizations of the mixed assemblies, suggesting that out-of-equilibrium conditions are transiently reached. Mass reorganization of the surfactant-enriched assemblies is much faster than in the lipid enriched ones, providing insight into the role of lipids in a slow reorganization of the assemblies.

Mixed Copolymer Adlayers Allowing Reversible Thermal Control of Single Cell Aspect Ratio.

Dynamic guidance of living cells is achieved by fine-tuning and spatiotemporal modulation on artificial polymer layers enabling reversible peptide display. Adjustment of surface composition and interactions is obtained by coadsorption of mixed poly(lysine) derivatives, grafted with either repellent PEG, RGD adhesion peptides, or T-responsive poly(N-isopropylacrylamide) strands. Deposition of mixed adlayers provides a straightforward mean to optimize complex substrates, which is here implemented to achieve (1) thermal control of ligand accessibility and (2) adjustment of relative adhesiveness between adjacent micropatterns, while preserving cell attachment during thermal cycles. The reversible polarization of HeLa cells along orthogonal stripes mimics guidance along natural matrices.

Aggregation of Antibody Drug Conjugates at Room Temperature: SAXS and Light Scattering Evidence for Colloidal Instability of a Specific Subpopulation.

Coupling a hydrophobic drug onto monoclonal antibodies via lysine residues is a common route to prepare antibody-drug conjugates (ADC), a promising class of biotherapeutics. But a few chemical modifications on protein surface often increase aggregation propensity, without a clear understanding of the aggregation mechanisms at stake (loss of colloidal stability, self-assemblies, denaturation, etc.), and the statistical nature of conjugation introduces polydispersity in the ADC population, which raises questions on whether the whole ADC population becomes unstable. To characterize the average interactions between ADC, we monitored small-angle X-ray scattering in solutions of monoclonal IgG1 human antibody drug conjugate, with average degree of conjugation of 0, 2, or 3 drug molecules per protein. To characterize stability, we studied the kinetics of aggregation at room temperature. The intrinsic Fuchs stability ratio of the ADC was estimated from the variation over time of scattered light intensity and hydrodynamic radius, in buffers of varying pH, and at diverse sucrose (0% or 10%) and NaCl (0 or 100 mM) concentrations. We show that stable ADC stock solutions became unstable upon pH shift, well below the pH of maximum average attraction between IgGs. Data indicate that aggregation can be ascribed to a fraction of ADC population usually representing less than 30 mol % of the sample. In contrast to the case of (monodisperse) monoclonal antibodies, our results suggest that a poor correlation between stability and average interaction parameters should be expected as a corollary of dispersity of ADC conjugation. In practice, the most unstable fraction of the ADC population can be removed by filtration, which affects remarkably the apparent stability of the samples. Finally, the lack of correlation between the kinetic stability and variations of the average inter-ADC interactions is tentatively attributed to the uneven nature of charge distributions and the presence of patches on the drug-modified antibodies.

Temperature-Switchable Control of Ligand Display on Adlayers of Mixed Poly(lysine)-g-(PEO) and Poly(lysine)-g-(ligand-modified poly-N-isopropylacrylamide).

Adlayers of poly(lysine)-g-PEG comblike copolymer are extensively used to prepare cell-repellant and protein-repellent surfaces by a straightforward coulomb-driven adsorption that is compatible with diverse substrates (glass, Petri dish, etc.). To endow surfaces with functional properties, namely, controlled ligand-protein binding, comblike poly(lysine) derivatives were used to deposit temperature-responsive poly(NIPAM) macrografts mixed with PEG ones on glass surfaces. Simple surface immersion in mixed solutions of biotin-modified poly(lysine)-g-poly(N-isopropylacrylamide) and poly(lysine)-g-poly(ethylene oxide) yielded robust adlayers whose composition reflected the ratio between the two polymers in solution. We show by fluorescence imaging, and comparison with repellent 100% PEGylated patterns, that specific binding of model avidin/particle conjugates (diameters of ca. 10 or 200 nm) was controlled by temperature switch. The biotin ligand was displayed and accessible at low T, or hidden at T > LCST. Topography and mechanical mapping measurements by AFM confirmed the swelling/collapse status of PNIPAM macrografts in the adlayer at low/high T, respectively. Temperature-responsive comblike PLL derivative that can spontaneously cover anionic interfaces is a promising platform enabling good control on the deposition and accessibility of biofunctional groups on various solid surfaces.

Amphiphilic macromolecules on cell membranes: from protective layers to controlled permeabilization.

Antimicrobial and cell-penetrating peptides have inspired developments of abiotic membrane-active polymers that can coat, penetrate, or break lipid bilayers in model systems. Application to cell cultures is more recent, but remarkable bioactivities are already reported. Synthetic polymer chains were tailored to achieve (i) high biocide efficiencies, and selectivity for bacteria (Gram-positive/Gram-negative or bacterial/mammalian membranes), (ii) stable and mild encapsulation of viable isolated cells to escape immune systems, (iii) pH-, temperature-, or light-triggered interaction with cells. This review illustrates these recent achievements highlighting the use of abiotic polymers, and compares the major structural determinants that control efficiency of polymers and peptides. Charge density, sp. of cationic and guanidinium side groups, and hydrophobicity (including polarity of stimuli-responsive moieties) guide the design of new copolymers for the handling of cell membranes. While polycationic chains are generally used as biocidal or hemolytic agents, anionic amphiphilic polymers, including Amphipols, are particularly prone to mild permeabilization and/or intracell delivery.

Photofoams: remote control of foam destabilization by exposure to light using an azobenzene surfactant.

We report evidence for photocontrolled stability and breakage of aqueous foams made from solutions of a cationic azobenzene-containing surfactant over a wide range of concentrations. Exposure to UV or visible lights results in shape and polarity switches in the surfactant molecule, which in turn affects several properties including critical micelle concentration, equilibrium surface tension, and the air-water interfacial composition (cis isomers are displaced by trans ones). We demonstrate that the trans isomer stabilizes foams, whereas the cis isomer forms unstable foams, a property that does not correlate with effects of light on surface tension, nor with total surfactant concentration. Achieving in situ breakage of foam is accordingly ascribed to the remote control of the dynamics of adsorption/desorption of the surfactant, accompanied by gradients of concentrations out of equilibrium. Photomodulation of adsorption kinetics and/or diffusion dynamics on interfaces is reached here by a noninvasive clean trigger, bringing a new tool for the study of foams.

Amphipols from A to Z.

Amphipols (APols) are short amphipathic polymers that can substitute for detergents to keep integral membrane proteins (MPs) water soluble. In this review, we discuss their structure and solution behavior; the way they associate with MPs; and the structure, dynamics, and solution properties of the resulting complexes. All MPs tested to date form water-soluble complexes with APols, and their biochemical stability is in general greatly improved compared with MPs in detergent solutions. The functionality and ligand-binding properties of APol-trapped MPs are reviewed, and the mechanisms by which APols stabilize MPs are discussed. Applications of APols include MP folding and cell-free synthesis, structural studies by NMR, electron microscopy and X-ray diffraction, APol-mediated immobilization of MPs onto solid supports, proteomics, delivery of MPs to preexisting membranes, and vaccine formulation.

Light-responsiveness of C12E6/polymer complexes swollen with dodecane.

The association behavior of light-responsive azobenzene modified poly(sodium acrylate)s (AMPs) with C(12)E(6) (hexa-oxyethyleneglycol n-dodecyl ether) surfactant micelles swollen with dodecane was investigated using dynamic light scattering, UV spectrophotometry, and capillary electrophoresis techniques. AMPs complexes with oligoethyleneglycol n-alkyl ether show promising properties as emulsifiers for the light-triggered control of inversion of emulsions and the present work aims at giving new insights with respect to the nature of their photoresponse. Depending on the dodecane amount, the size of the spherical surfactant micelles was varied with radii ranging from 4 to 8 nm. AMPs can be viewed as long PAANa chains bearing several randomly distributed azobenzene groups. First, the binding behavior of the AMPs chains to the micelles swollen with various amounts of oil was thoroughly studied under dark-adapted conditions, which means that most azobenzene groups are in their trans conformation (less polar than the cis conformation obtained under UV irradiation). The binding of azobenzene to surfactant micelles, which leads to the formation of AMPs/surfactant complexes, is controlled by the energy of transfer of the azobenzene moiety from water to the micelle core and by the energy of loops formation since multiple attachments of azobenzene to a single micelle are expected with long AMPs chains. We show that the change in the energy of transfer of the azobenzene group between water and micelles upon increasing the amount of dodecane within the core of micelles was quite weak (not exceeding 0.7 kT). Within the investigated range of curvature, we observed that the energy of loops formation, which decreases with increasing micelle size (decrease of curvature or increase of oil amount) was similarly weak. The effect of the presence of dodecane on the photoresponse of the complex formation was investigated. It is shown that exposure to UV light markedly weakens the association of the AMPs with surfactant within a domain of surfactant concentrations much larger for swollen micelles than for pure surfactant micelles. Consequently, we suggest that emulsion inversion triggered by light could be due to the photomodulation of the binding of AMPs to colloidal objects with various and/or specific curvatures including surfactant mesophases or small size emulsion droplets.

Thermodynamic characterization of the exchange of detergents and amphipols at the surfaces of integral membrane proteins.

The aggregation of integral membrane proteins (IMPs) in aqueous media is a significant concern for mechanistic investigations and pharmaceutical applications of this important class of proteins. Complexation of IMPs with amphiphiles, either detergents or short amphiphilic polymers known as amphipols (APols), renders IMPs water-soluble. It is common knowledge that IMP-detergent complexes are labile, while IMP-APol complexes are exceptionally stable and do not dissociate even under conditions of extreme dilution. To understand the thermodynamic origin of this difference in stability and to guide the design of new APols, we have studied by isothermal titration calorimetry (ITC) the heat exchanges during two reciprocal processes, the "trapping" of detergent-solubilized IMPs in APols and the "stripping" of IMP-APol complexes by detergents, using two IMPs (the transmembrane domain of porin OmpA from Escherichia coli and bacteriorhodopsin from Halobium salinarium), two APols [an anionic polymer derived from acrylic acid (A8-35) and a cationic phosphorylcholine-based polymer (C22-43)], and two neutral detergents [n-octyl thioglucoside (OTG) and n-octyltetraethylene glycol (C(8)E(4))]. In the presence of detergent, free APols and IMP-APol complexes form mixed particles, APol-detergent and IMP-APol-detergent, respectively, according to the regular mixing model. Diluting IMP-APol-detergent complexes below the critical micellar concentration (CMC) of the detergent triggers the dispersion of detergent molecules as monomers, a process characterized by an enthalpy of demicellization. The enthalpy of APol <--> detergent exchange on the hydrophobic surface of IMPs is negligibly small, an indication of the similarity of the molecular interactions of IMPs with the two types of amphiphiles. The enhanced stability against dilution of IMP-APol complexes, compared to IMP-detergent ones, originates from the difference in entropy gain achieved upon release in water of a few APol molecules (in the case of IMP-APol complexes) or several hundred detergent molecules (in the case of IMP-detergent complexes). The data account both for the stability of IMP-APols complexes in the absence of detergent and for the ease with which detergents displace APols from the surface of proteins.

Rate of permeabilization of giant vesicles by amphiphilic polyacrylates compared to the adsorption of these polymers onto large vesicles and tethered lipid bilayers.

We examined by fluorescence microscopy the permeabilization of giant vesicles by hydrophobically modified polyacrylates (called amphipols). Amphipols trigger permeabilization to FITC-dextran of egg-PC/DPPA vesicles with no breakage of the lipid bilayers. The polyanionic amphipols were passing through bilayers as shown by permeabilization of multilamellar vesicles. Remarkably, the vesicles were not simultaneously permeable but became leaky one after the other. Altogether, our observations suggest a random formation of pores having diameters above a few nanometers. Decreasing pH and increasing ionic strength and polymer concentration were increasing the rate of permeabilization. The rate and efficiency of permeabilization was compared to the rate and density of adsorption of amphipols onto lipid membranes (as estimated by titration calorimetry onto large unilamellar vesicles and neutron reflectivity measurements on tethered bilayers). The polymer adsorption layer is built up in a few minutes. We conclude that the rate-limiting step for permeabilization is not the adsorption from the bulk solution but relates to slow intramembrane reorganizations.

Complexation of integral membrane proteins by phosphorylcholine-based amphipols.

Amphiphilic macromolecules, known as amphipols, have emerged as promising candidates to replace conventional detergents for handling integral membrane proteins in water due to the enhanced stability of protein/amphipol complexes as compared to protein/detergent complexes. The limited portfolio of amphipols currently available prompted us to develop amphipols bearing phosphorylcholine-based units (PC). Unlike carboxylated polymers, PC-amphipols remain soluble in aqueous media under conditions of low pH, high salt concentration, or in the presence of divalent ions. The solubilizing properties of four PC-amphipols were assessed in the case of two membrane proteins, cytochrome b(6)f and bacteriorhodopsin. The protein/PC-amphipol complexes had a low dispersity in size, as determined by rate zonal ultracentrifugation. Short PC-amphipols ( approximately 22 kDa) of low dispersity in length, containing approximately 30 mol% octyl side groups, approximately 35 mol% PC-groups, and approximately 35 mol% isopropyl side groups, appeared best suited to form stable complexes, preserving the native state of BR over periods of several days. BR/PC-amphipol complexes remained soluble in aqueous media at pH> or =5, as well as in the presence of 1 M NaCl or 12 mM calcium ions. Results from isothermal titration calorimetry indicated that the energetics of the conversion of BR/detergent complexes into BR/amphipol complexes are similar for PC-amphipols and carboxylated amphiphols.

Photoresponsive viscosity and host-guest association in aqueous mixtures of poly-cyclodextrin with azobenzene-modified poly(acrylic)acid.

In aqueous solutions, beta-cyclodextrin (CD) and cyclodextrin-containing polymers (PolCD) associate with azobenzene-modified polyacrylate (AMP). Inclusion complexes in solution of CD (or PolCD) and AMP, and the viscosity of these mixtures, have been studied as a function of the composition of AMP and concentrations of samples. AMPs are random copolymers containing a low fraction of a light-responsive hydrophobic moieties (<10 mol % of 6-[4-alkylamido]phenylazobenzene acrylamide), and a charged hydrophilic unit, sodium acrylate. PolCDs are beta-cyclodextrin randomly conjugated with epichlorohydrin and fractionated to yield copolymers of average number of CD per chain equal to 50. In dilute solutions, the composition of complexes has been investigated by capillary electrophoresis and UV-vis spectrometry. Association between PolCD and AMP appears more complex than the conventional Benesi-Hildebrand scheme. We identified a tight (quantitative) binding regime followed by a gradual increase of the density of AMP-bound PolCD upon increasing the concentration of PolCD. At higher concentrations, the formation of large clusters has been characterized by the increase of viscosity by several decades. Light-triggered trans-conformation of the azobenzene moieties of AMPs leads to a marked photoswitch of viscosity. Reversible viscosity swings by up to 6-fold were achieved by alternative exposure to UV and visible lights. In contrast, the composition of PolCD/AMP complexes in dilute regime does not respond to light, though subtle modifications of the structures of complexes are reflected by variation of electrophoretic mobilities and UV spectra. The properties of interpolymer clusters and photoviscosity are accordingly the result of modification of the dynamics of association. In practice, the low concentration of photochrome makes it possible to obtain rapid responses in samples having a thickness of the order of cm. The data reported provide guidelines for the formulations of CD/polymer systems, specifically, viscosity enhancers, which should show promising developments in pharmaceuticals or cosmetics.

Enthalpy of interaction and binding isotherms of non-ionic surfactants onto micellar amphiphilic polymers (amphipols).

The interactions in water between short amphiphilic macromomolecules, known as amphipols, and three neutral surfactants (detergents), dodecylmaltoside (DM), n-octylthioglucoside (OTG), and n-octyltetraethyleneoxide (C8E4), have been assessed by static and dynamic light-scattering (SLS and DLS), capillary electrophoresis (CE), and isothermal titration calorimetry (ITC). The amphipols selected are random copolymers of the hydrophobic n-octylacrylamide (25-30 mol %), a charged hydrophilic monomer, either acrylic acid ( approximately 35 mol %) or a phosphorylcholine-modified acrylamide (40-70 mol %), and, optionally, N-isopropylacrylamide (30-40 mol %). In water, the copolymers form micelles of small size (hydrodynamic radius: approximately 5 nm). Neutral surfactants, below their critical micellar concentration (cmc), form mixed micelles with the amphipols irrespective of the chemical structure of the detergent or the polymer. The fraction of detergent in the surfactant/polymer complexes increases significantly (cooperatively) as the surfactant concentration nears the cmc. The ITC data, together with data gathered by CE, were fitted via a regular mixing model, which allowed us to predict the detergent concentration in equilibrium with complexes and the heat evolved upon transfer of detergent from water into a mixed surfactant/polymer complex. The enthalpy of transfer was found to be almost equal to the enthalpy of micellization, and the regular mixing model points to a near-ideal mixing behavior for all systems. Amphipols are promising tools in biochemistry where they are used, together with neutral surfactants, for the stabilization and handling of proteins. This study provides guidelines for the optimization of current protein purification protocols and for the formulations of surfactant/polymer systems used in pharmaceutics, cosmetics, and foodstuffs.

Light-responsive hydrophobic association of azobenzene-modified poly(acrylic acid) with neutral surfactants.

Photoresponsive association between azobenzene-modified poly(acrylic acid)s (AMPs) and the nonionic surfactants tetraethylene glycol monododecyl ether and octadecyl ether (C12E4 and C18E4) has been achieved in dilute aqueous solution. The binding was investigated by (i) spectrophotometry that probes the polarity close to the azobenzene chromophore, (ii) capillary electrophoresis to obtain the amount of C12E4 bound per polymer chain, and (iii) pressure-area curves of Langmuir films to obtain information on the adsorption of AMP at the water-C18E4 interface. Increasing hydrophobicity of AMP (with increasing degree of modification with azobenzene side-groups) tightened the association with C12E4 in the dark. Exposure to UV light rapidly converted the azobenzene to their more polar cis isomer, which in turn weakened the association with surfactant. Almost complete photorelease of bound C12E4 was obtained with the optimal structure of AMP. Adsorption on large interfaces is much less sensitive to light. The possible origin of the photoresponse is analyzed in terms of AMP affinity for surfactant assemblies and azobenzene penetration in the hydrophobic core of micelles. We propose that the photoswing of polarity is amplified by the binding to small micelles because of the small number of anchors involved. A few azobenzene anchors afford tight binding in the dark, but also detach more easily than the whole AMP chain upon photoisomerization.

Size, charge, and interactions with giant lipid vesicles of quantum dots coated with an amphiphilic macromolecule.

Semiconductor colloidal quantum dots (QDs) are promising fluorescent probes for biology. Initially synthesized in organic solvents, they can be dispersed in aqueous solution by noncovalent coating with amphiphilic macromolecules, which renders the particles hydrophilic and modifies their interactions with other biological compounds. Here, after coating QDs with an alkyl-modified polyacrilic acid, we investigated their colloidal properties in aqueous buffers by electrophoresis, electron microscopy, light scattering, and rate zonal centrifugation. Despite polymer dispersity and variation of the size of the inorganic nanoparticles, the polymer-dot complexes appeared relatively well-defined in terms of hydrodynamic radius and surface charge. Our data show that these complexes contain isolated QD surrounded by a polymer layer with thickness 8-10 nm. We then analyzed their interaction with giant unilamellar vesicles, either neutral or cationic, by optical microscopy. At neutral pH, we found the absence of binding of the coated particles to lipid membrane, irrespective of their lipid composition. An abrupt surface aggregation of the nanoparticles on the lipid membrane was observed in a narrow pH range (6.0-6.2), indicative of critical binding triggered by polymer properties. The overall features of QDs coated with amphiphilic polymers open the route to using these nanoparticles in vivo as optically stable probes with switchable properties.

Effects of protein-polyelectrolyte affinity and polyelectrolyte molecular weight on dynamic properties of bovine serum albumin-poly(diallyldimethylammonium chloride) coacervates.

Bovine serum albumin (BSA) and poly(diallyldimethylammonium chloride) (PDADMAC) spontaneously form, over a range of ionic strength I and pH, dense fluids rich in both macroions. To study their nanostructure, these coacervates were prepared at low I and high pH (strong interaction) or at high I and lower pH (weaker interaction), with polymer MWs ranging from 90K to 700K, and then examined by dynamic light scattering (DLS) and rheology. DLS shows a dominant and surprisingly fast protein diffusional mode independent of polymer MW; accompanied by robust slow modes, slower by 1-2 orders of magnitude, which are also insensitive to MW and are present regardless of I, pH, and sample aging. High MW sensitivity was observed by rheology for the terminal time (order of milliseconds), which increased as well with the strength of polyelectrolyte-protein interaction. Viscoelastic behavior also indicated a tenuous network, solidlike at low strain but re-forming after breakage by shear. Two models, both of which have strengths and defects, are put forward: (I) macroion-rich domains dispersed in a continuum of macroion-poor domains near the percolation limit and (II) a semidilute solution of PDADMAC chains with interchain friction modulated by transient BSA-PDADMAC association.

Amphipols: polymeric surfactants for membrane biology research.

Membrane proteins classically are handled in aqueous solutions as complexes with detergents. The dissociating character of detergents, combined with the need to maintain an excess of them, frequently results in more or less rapid inactivation of the protein under study. Over the past few years, we have endeavored to develop a novel family of surfactants, dubbed amphipols (APs). APs are amphiphilic polymers that bind to the transmembrane surface of the protein in a noncovalent but, in the absence of a competing surfactant, quasi-irreversible manner. Membrane proteins complexed by APs are in their native state, stable, and they remain water-soluble in the absence of detergent or free APs. An update is presented of the current knowledge about these compounds and their demonstrated or putative uses in membrane biology.

Slow Reorganization of Small Phosphatidylcholine Vesicles upon Adsorption of Amphiphilic Polymers.

Static or dynamic light scattering measurements were performed in parallel, on dilute mixtures of DPPC/DPPA vesicles (typical radius 60 nm) and hydrophobically modified polymers. This technique gave evidence of the slow kinetics involved in both the reorganization of an adsorbed polymer layer and the membrane breakage. Hours, or sometimes days, were required in order to follow the variation of both the hydrodynamic radius and the scattering intensity at intermediate stages. Images of the intermediate species were collected using freeze-fracture electron microscopy (FFEM). Comparison of different polymers (of varying molecular weight or structure) revealed the prime importance of hydrophobicity on the disruption of membranes. Although the presence of a few percent of pendant alkyl chains along the polymer backbone induced adsorption to membranes, only the association with the more hydrophobic ones (>25 mol% of pendant octyl groups) resulted in small mixed objects of micellar size (radius about 10 nm). The drop of the mean radius of intermediate structures formed upon the vesicle breakage was also sensitive to temperature. A tentative mechanism was proposed on the basis of kinetics and FFEM studies. Copyright 2001 Academic Press.

Interaction of amphipols with sarcoplasmic reticulum Ca2+-ATPase.

Amphipols are short-chain amphipathic polymers designed to keep membrane proteins soluble in aqueous solutions. We have evaluated the effects of the interaction of amphipols with sarcoplasmic reticulum Ca(2+)-ATPase either in a membrane-bound or a soluble form. If the addition of amphipols to detergent-solubilized ATPase was followed by removal of detergent, soluble complexes formed, but these complexes retained poor ATPase activity, were not very stable upon long incubation periods, and at high concentrations they experienced aggregation. Nevertheless, adding excess detergent to diluted detergent-free ATPase-amphipol complexes incubated for short periods immediately restored full activity to these complexes, showing that amphipols had protected solubilized ATPase from the rapid and irreversible inactivation that otherwise follows detergent removal. Amphipols also protected solubilized ATPase from the rapid and irreversible inactivation observed in detergent solutions if the ATPase Ca(2+) binding sites remain vacant. Moreover, in the presence of Ca(2+), amphipol/detergent mixtures stabilized concentrated ATPase against inactivation and aggregation, whether in the presence or absence of lipids, for much longer periods of time (days) than detergent alone. Our observations suggest that mixtures of amphipols and detergents are promising media for handling solubilized Ca(2+)-ATPase under conditions that would otherwise lead to its irreversible denaturation and/or aggregation.