River pollution remediation monitored by optical and infrared high-resolution satellite images.

The Bormida River Basin, located in the northwestern region of Italy, has been strongly contaminated by the ACNA chemical factory. This factory was in operation from 1892 to 1998, and contamination from the factory has had deleterious consequences on the water quality, agriculture, natural ecosystems and human health. Attempts have been made to remediate the site. The aims of this study were to use high-resolution satellite images combined with a classical remote sensing methodology to monitor vegetation conditions along the Bormida River, both upstream and downstream of the ACNA chemical factory site, and to compare the results obtained at different times before and after the remediation process. The trends of the Normalised Difference Vegetation Index (NDVI) and the Enhanced Vegetation Index (EVI) along the riverbanks are used to assess the effect of water pollution on vegetation. NDVI and EVI values show that the contamination produced by the ACNA factory had less severe effects in the year 2007, when most of the remediation activities were concluded, than in 2006 and 2003. In 2007, the contamination effects were noticeable up to 6 km downstream of the factory, whereas in 2003 and 2006 the influence range was up to about 12 km downstream of the factory. The results of this study show the effectiveness of remediation activities that have been taking place in this area. In addition, the comparison between NDVI and EVI shows that the EVI is more suitable to characterise the vegetation health and can be considered an additional tool to assess vegetation health and to monitor restoration activities.

Environmental scanning electron microscopy technique to identify asbestos phases inside ferruginous bodies.

Ferruginous bodies observed in lungs of patients affected by mesothelioma, asbestosis, and pulmonary carcinoma are important to relate the illness to exposure, environmental or occupational, to asbestos. Identification of the inorganic phase constituting the core of the ferruginous bodies, formed around asbestos but also around phases different from asbestos, is essential for legal purposes. Environmental scanning electron microscopy/energy dispersive spectroscopy was used to identify the fibrous mineral phase in the core of ferruginous bodies observed directly in thin sections of tissue, without digestion of the biological matrix. Spectra were taken with sequential analyses along a line crossing the core of the ferruginous bodies. By comparing the spectra taken near to and far from the core, the chemical elements that make up the core could be identified.

An air quality balance index estimating the total amount of air pollutants at ground level.

A new index named Air Quality Balance Index (AQBI), which is able to characterise the amount of pollution level in a selected area, is proposed. This index is a function of the ratios between pollutant concentration values and their standards; it aims at identifying all situations in which there is a possible environmental risk even when several pollutants are below their limit values but air quality is reduced. AQBI is evaluated by using a high-resolution three-dimensional dispersion model: the air concentration for each substance is computed starting from detailed emissions sources: point, line and area emissions hourly modulated. This model is driven with accurate meteorological data from ground stations and remote sensing systems providing vertical profiles of temperature and wind; these data are integrated with wind and temperature profiles at higher altitudes obtained by a Local Area Model. The outputs of the dispersion model are compared with pollutant concentrations provided by measuring stations, in order to recalibrate emission data. A three-dimensional high resolution grid of AQBI data is evaluated for an industrial area close to Alessandria (Northern Italy), assessing air quality and environmental conditions. Performance of AQBI is compared with the Air Quality Index (AQI) developed by the U.S. Environmental Protection Agency. AQBI, computed taking into account all pollutants, is able to point out situations not evidenced by AQI, based on a preset limited number of substances; therefore, AQBI is a good tool for evaluating the air quality either in urban and in industrial areas. The AQBI values at ground level, in selected points, are in agreement with in situ observations.

Study of inorganic particles, fibers, and asbestos bodies by variable pressure scanning electron microscopy with annexed energy dispersive spectroscopy and micro-Raman spectroscopy in thin sections of lung and pleural plaque.

In a previous work it has been demonstrated that micro-Raman spectroscopy is a technique able to recognize crystalline phases on untreated samples. In that case, inorganic particles and uncoated fibers from bronchoalveolar lavage (BAL) of a patient affected by pneumoconiosis were identified and characterized. In this work the technique is applied to asbestos bodies, that is, to coated fibers, and on crystallizations and fibrous phases observed in the plural plaque from patients affected by mesothelioma. From the Raman analysis the abundant fibrous material observed in the pleural area is talc, whereas rounded grains in the pleural tissue show the Raman spectrum of apatite, a calcium phosphate mineral particular to bones. In the pulmonary tissue many asbestos bodies, consisting of the incorporated fibers coated by iron-rich proteins, were observed. Under the 632.8 nm laser beam of the spectrometer, photo-crystallization of hematite in the iron-rich material forming the asbestos bodies can be proposed by the changes in the Raman spectra acquired during subsequent acquisitions. Nevertheless, the identification of the mineral phase constituting the incorporated fiber was possible by analyzing the Raman spectra; the results were confirmed by variable pressure scanning electron microscopy with annexed energy dispersive spectroscopy (VP-SEM-EDS) analyses.