Improving the intrinsic conductance of selective area grown in-plane InAs nanowires with a GaSb shell.

The nanoscale intrinsic electrical properties of in-plane InAs nanowires grown by selective area epitaxy are investigated using a process-free method involving a multi-probe scanning tunneling microscope. The resistance of oxide-free InAs nanowires grown on an InP(111)Bsubstrate and the resistance of InAs/GaSb core-shell nanowires grown on an InP(001) substrate are measured using a collinear four-point probe arrangement in ultrahigh vacuum. They are compared with the resistance of two-dimensional electron gas reference samples measured using the same method and with the Van der Pauw geometry for validation. A significant improvement of the conductance is achieved when the InAs nanowires are fully embedded in GaSb, exhibiting an intrinsic sheet conductance close to the one of the quantum well counterpart.

In-plane InGaAs/Ga(As)Sb nanowire based tunnel junctions grown by selective area molecular beam epitaxy.

In-plane InGaAs/Ga(As)Sb heterojunction tunnel diodes are fabricated by selective area molecular beam epitaxy with two different architectures: either radial InGaAs core/Ga(As)Sb shell nanowires or axial InGaAs/GaSb heterojunctions. In the former case, we unveil the impact of strain relaxation and alloy composition fluctuations at the nanoscale on the tunneling properties of the diodes, whereas in the latter case we demonstrate that template assisted molecular beam epitaxy can be used to achieve a very precise control of tunnel diodes dimensions at the nanoscale with a scalable process. In both cases, negative differential resistances with large peak current densities are achieved.

Physical mechanisms involved in the formation and operation of memory devices based on a monolayer of gold nanoparticle-polythiophene hybrid materials.

Understanding the physical and chemical mechanisms occurring during the forming process and operation of an organic resistive memory device is a requisite for better performance. Various mechanisms were suggested in vertically stacked memory structures, but the analysis remains indirect and needs destructive characterization (e.g. analysis of the cross-section to access the organic layers sandwiched between electrodes). Here, we report a study on a planar, monolayer thick, hybrid nanoparticle/molecule device (10 nm gold nanoparticles embedded in an electro-generated poly(2-thienyl-3,4-(ethylenedioxy)thiophene) layer), combining in situ physical (scanning electron microscopy, physicochemical thermogravimetry and mass spectroscopy, and Raman spectroscopy) and electrical (temperature dependent current-voltage) characterization on the same device. We demonstrate that the forming process causes an increase in the gold particle size, almost 4 times larger than the starting nanoparticles, and that the organic layer undergoes a significant chemical rearrangement from an sp3 to sp2 amorphous carbon material. Temperature dependent electrical characterization of this nonvolatile memory confirms that the charge transport mechanism in the device is consistent with a trap-filled space charge limited current in the off state, with the sp2 amorphous carbon material containing many electrically active defects.

In-plane InSb nanowires grown by selective area molecular beam epitaxy on semi-insulating substrate.

In-plane InSb nanostructures are grown on a semi-insulating GaAs substrate using an AlGaSb buffer layer covered with a patterned SiO2 mask and selective area molecular beam epitaxy. The shape of these nanostructures is defined by the aperture in the silicon dioxide layer used as a selective mask thanks to the use of an atomic hydrogen flux during the growth. Transmission electron microscopy reveals that the mismatch accommodation between InSb and GaAs is obtained in two steps via the formation of an array of misfit dislocations both at the AlGaSb buffer layer/GaAs and at the InSb nanostructures/AlGaSb interfaces. Several micron long in-plane nanowires (NWs) can be achieved as well as more complex nanostructures such as branched NWs. The electrical properties of the material are investigated by the characterization of an InSb NW MOSFET down to 77 K. The resulting room temperature field effect mobility values are comparable with those reported on back-gated MOSFETs based on InSb NWs obtained by vapor liquid solid growth or electrodeposition. This growth method paves the way to the fabrication of complex InSb-based nanostructures.

Two-scale analysis of a tight gas sandstone.

Tight gas sandstones are low porosity media, with a very small permeability (i.e., below 1 mD). Their porosity is below 10%, and it is mainly composed of fine noncemented microcracks, which are present between neighboring quartz grains. While empirical models of permeability are available, their predictions, which do not compare well with macroscopic measurements, are not reliable to assess gas well productivity. The purpose of this work is to compare the permeability measured on centimetric plugs to predictions based on pore structure data. Two macroscopic measurements are performed, namely dry gas permeability and mercury intrusion porosimetry (MIP), together with a series of local measurements including focused ion beam and scanning electron microscopy (FIB-SEM), x-ray computed microtomography (CMT), and standard two-dimensional (2D) SEM. Numerical modeling is performed by combining analyses on two scales, namely the microcrack network scale (given by 2D SEM) and the individual 3D microcrack scale (given by either FIB-SEM or CMT). The network permeability is calculated by means of techniques developed for fracture networks. This permeability is proportional to the microcrack transmissivity, which is determined by solving the Stokes equation in the microcracks measured by FIB-SEM or CMT. Good correlation with experimental permeability values is only found when using transmissivity from 3D CMT data.

Selective area heteroepitaxy of GaSb on GaAs (001) for in-plane InAs nanowire achievement.

The growth of in-plane GaSb nanotemplates on a GaAs (001) substrate is demonstrated combining nanoscale patterning of the substrate and selective area heteroepitaxy. The selective growth of GaSb inside nano-stripe openings in a SiO2 mask layer is achieved at low temperature thanks to the use of an atomic hydrogen flux during the molecular beam epitaxy. These growth conditions promote the spreading of GaSb inside the apertures and lattice mismatch accommodation via the formation of a regular array of misfit dislocations at the interface between GaSb and GaAs. We highlight the impact of the nano-stripe orientation as well as the role of the Sb/Ga flux ratio on the strain relaxation of GaSb along the [110] direction and on the nanowire length along the [1-10] one. Finally we demonstrate how these GaSb nanotemplates can be used as pedestals for subsequent growth of in-plane InAs nanowires.

Locally measuring the adhesion of InP directly bonded on sub-100 nm patterned Si.

A nano-scale analogue to the double cantilever experiment that combines instrumented nano-indentation and atomic force microscopy is used to precisely and locally measure the adhesion of InP bonded on sub-100 nm patterned Si using oxide-free or oxide-mediated bonding. Surface-bonding energies of 0.548 and 0.628 J m(-2), respectively, are reported. These energies correspond in turn to 51% and 57% of the surface bonding energy measured in unpatterned regions on the same samples, i.e. the proportion of unetched Si surface in the patterned areas. The results show that bonding on patterned surfaces can be as robust as on unpatterned surfaces, provided care is taken with the post-patterning surface preparation process and, therefore, open the path towards innovative designs that include patterns embedded in the Si guiding layer of hybrid III-V/Si photonic integrated circuits.

Impact of P/In flux ratio and epilayer thickness on faceting for nanoscale selective area growth of InP by molecular beam epitaxy.

The impact of the P/In flux ratio and the deposited thickness on the faceting of InP nanostructures selectively grown by molecular beam epitaxy (MBE) is reported. Homoepitaxial growth of InP is performed inside 200 nm wide stripe openings oriented either along a [110] or [1-10] azimuth in a 10 nm thick SiO2 film deposited on an InP(001) substrate. When varying the P/In flux ratio, no major shape differences are observed for [1-10]-oriented apertures. On the other hand, the InP nanostructure cross sections strongly evolve for [110]-oriented apertures for which (111)B facets are more prominent and (001) ones shrink for large P/In flux ratio values. These results show that the growth conditions allow tailoring the nanocrystal shape. They are discussed in the framework of the equilibrium crystal shape model using existing theoretical calculations of the surface energies of different low-index InP surfaces as a function of the phosphorus chemical potential, directly related to the P/In ratio. Experimental observations strongly suggest that the relative (111)A surface energy is probably smaller than the calculated value. We also discuss the evolution of the nanostructure shape with the InP-deposited thickness.

Influence of nanoscale faceting on the tunneling properties of near broken gap InAs/AlGaSb heterojunctions grown by selective area epitaxy.

We report on the selective area molecular beam epitaxy of InAs/AlGaSb heterostructures on a GaSb (001) substrate. This method is used to realize Esaki tunnel diodes with a tunneling area down to 50 nm × 50 nm. The impact of the size reduction on the peak current density of the diode is investigated, and we show how the formation of the InAs facets can deeply affect the band-to-band tunneling properties of the heterostructure. This phenomenon is explained by the surface-dependent incorporation of Si dopant during growth.

Nanometer-scale, quantitative composition mappings of InGaN layers from a combination of scanning transmission electron microscopy and energy dispersive x-ray spectroscopy.

Using elastic scattering theory we show that a small set of energy dispersive x-ray spectroscopy (EDX) measurements is sufficient to experimentally evaluate the scattering function of electrons in high-angle annular dark field scanning transmission microscopy (HAADF-STEM). We then demonstrate how to use this function to transform qualitative HAADF-STEM images of InGaN layers into precise, quantitative chemical maps of the indium composition. The maps obtained in this way combine the resolution of HAADF-STEM and the chemical precision of EDX. We illustrate the potential of such chemical maps by using them to investigate nanometer-scale fluctuations in the indium composition and their impact on the growth of epitaxial InGaN layers.