Cobalt Minimisation in Violet Co3P2O8 Pigment.

This study considers the limitations of cobalt violet orthophosphate, Co3P2O8, in the ceramic industry due to its large amount of cobalt. MgxCo3-xP2O8 (0 ≤ x ≤ 3) solid solutions with the stable Co3P2O8 structure were synthesised via the chemical coprecipitation method. The formation of solid solutions between the isostructural Co3P2O8 and Mg3P2O8 compounds decreased the toxically large amount of cobalt in this inorganic pigment and increased the melting point to a temperature higher than 1200 °C when x ≥ 1.5. Co3P2O8 melted at 1160 °C, and compositions with x ≥ 1.5 were stable between 800 and 1200 °C. The substitution of Co(II) with Mg(II) decreased the toxicity of these materials and decreased their price; hence, the interest of these materials for the ceramic industry is greater. An interesting purple colour with a* = 31.6 and b* = -24.2 was obtained from a powdered Mg2.5Co0.5P2O8 composition fired at 1200 °C. It considerably reduced the amount of cobalt, thus improving the colour of the Co3P2O8 pigment (a* = 16.2 and b* = -20.1 at 1000 °C). Co3P2O8 is classified as an inorganic pigment (DCMA-8-11-1), and the solid solutions prepared were also inorganic pigments when unglazed. When introducing 3% of the sample (pigment) together with enamel, spreading the mixture on a ceramic support and calcining the whole in an electric oven, a colour change from violet to blue was observed due to the change in the local environment of Co(II), which could be seen in the UVV spectra of the glazed samples with the displacement of the bands towards higher wavelengths and with the appearance of a new band assigned to tetrahedral Co(II). This blue colour was also obtained with Co2SiO4, MgCoSiO4 or Co3P2O8 pigments containing a greater amount of cobalt.

Ag- and Sr-enriched nanofibrous titanium phosphate phases as potential antimicrobial cement and coating for a biomedical alloy.

Biomaterials and their surfaces regulate the biological response and ultimately the quality of healing at a possible site of implantation. The physical, chemical and topographical properties of implants' surfaces play a decisive role in the biological integration process for their immediate loading and long-term success. Since at this level of biological interaction nano-dimensionality is basically entailed, bio-functional nanostructured composites either as filling/cement or coating to metallic implants are required. This study shows the possibility of synthesizing two phases of nanostructured titanium phosphate (π and ρ polymorphs) and enriching them with silver nanoparticles and strontium. More importantly, Ag-Sr-enriched nanostructured π­titanium phosphate is induced to grow on a commercially available titanium alloy (Ti-6Al-4V), widely used in orthopedic and dental implants, under highly controlled conditions. Structural and microscopic studies, using XRD, HRTEM and SEM altogether confirm the resultant phases and their enrichment with strontium and silver nanoparticles with an average particle size around 6 nm. Using confocal laser scanning microscopy, the surface roughness was measured and is found to lay at the interface between the nanosized and microsized topologies. Ion release assessments showed that the presence of strontium controlled the release rate of silver ions and this could be beneficial in terms of decreasing the accompanied cytotoxicity that is usually encountered at high concentrations of silver release. Antimicrobial and cell proliferation assays have proved that enriching titanium phosphate with strontium and silver nanoparticles has improved their antimicrobial properties, while the cytotoxicity could be controlled.

Structural and proton conductivity studies of fibrous π-Ti2O(PO4)2·2H2O: application in chitosan-based composite membranes.

Although the fibrous polymorphic modification of titanium phosphate, π-Ti2O(PO4)2·2H2O (π-TiP) has been known for decades, its crystal structure has remained unsolved. Herewith, we report the crystal structure of π-TiP at room temperature, as determined from synchrotron radiation powder X-ray diffraction, and corroborated by 31P solid state NMR and accurate density functional theory calculations. In contrast to the previously reported ρ-TiP polymorph, the as-synthesized hydrated phase crystallizes in the monoclinic system (P21/c, a = 5.1121(2) Å, b = 14.4921(9) Å, c = 12.0450(11), ß = 115.31(1)°, Z = 4), and is composed of corner-sharing titanium octahedra and phosphate units arranged in a pattern that is unique to the ρ-TiP polymorph. The unit cell was confirmed by electron diffraction, while the formation of planar packing imperfections and stacking faults along the [101] plane was revealed by HRTEM analysis. An in situ dehydration study of π-TiP, monitored by high-temperature powder X-ray diffraction, led to a new anhydrous monoclinic (P21/c, a = 5.1187(13) Å, b = 11.0600(21) Å, c = 14.4556(26), ß = 107.65(2)°, Z = 4) phase that crystallizes at 500 °C. The latter resembles the packing fashion of the parental π-TiP, albeit titanium atoms are present in both distorted tetrahedral and octahedral coordination environments. Anhydrous π-TiP was found to partially rehydrate at room temperature, reversibly adopting the structure of the initial phase. The studies carried out under different conditions of leaching and impregnation with H3PO4 showed that π-TiP exhibits an extrinsic proton conductivity (1.3 × 10-3 S cm-1 at 90 °C and 95% RH) due to the presence of the protonated phosphate species bound on the particles surface, as revealed by 31P MAS-NMR spectroscopy data. The composite membranes of Chitosan (CS) matrices filled with H3PO4-impregnated π-TiP solid show an increment of proton conductivity up to 4.5 × 10-3 S cm-1, at 80 °C and 95% RH, which is 1.8-fold higher than those of the bare CS membranes.

Nanolayered Metal Phosphates as Biocompatible Reservoirs for Antimicrobial Silver Nanoparticles.

There is an increasing demand on synthesizing pharmaceuticals and biomaterials that possess antimicrobial and/or antiviral activities. In this respective silver nanoparticles are known for their excellent antimicrobial activity. Nevertheless, their uncontrolled release in a biological medium can induce a cytotoxic effect. For this, we explored the use of nanolayered metal phosphates based on titanium and zirconium as materials that can be enriched with silver nanoparticles. Employing the hydrothermal route, crystalline α-phases of zirconium and titanium phosphates (α-ZrP, α-TiP) were synthesized and there after surface-enriched with silver nanoparticles. The structural assessment confirmed the stability of the structures and their sizes are in the nanoscale at least in one dimension. The cytocompatibility assays confirmed the biocompatibility of the pristine phases and the antimicrobial assay confirmed that both silver-enriched nanolayered structures maintain an antibacterial effect at reasonably low concentrations.

Kinetic Analysis of the Thermal Decomposition of Iron(III) Phosphates: Fe(NH3)2PO4 and Fe(ND3)2PO4.

The hydrothermal synthesis and both the chemical and structural characterization of a diamin iron phosphate are reported. A new synthetic route, by using n-butylammonium dihydrogen phosphate as a precursor, leads to the largest crystals described thus far for this compound. Its crystal structure is determined from single-crystal X-ray diffraction data. It crystallizes in the orthorhombic system (Pnma space group, a = 10.1116(2) Å, b = 6.3652(1) Å, c = 7.5691(1) Å, Z = 4) at room temperature and, below 220 K, changes towards the monoclinic system P21/n, space group. The in situ powder X-ray thermo-diffraction monitoring for the compound, between room temperature and 1100 K, is also included. Thermal analysis shows that the solid is stable up to ca. 440 K. The kinetic analysis of thermal decomposition (hydrogenated and deuterated forms) is performed by using the isoconversional methods of Vyazovkin and a modified version of Friedman. Similar values for the kinetic parameters are achieved by both methods and they are checked by comparing experimental and calculated conversion curves.

The ability of a fibrous titanium oxophosphate for nitrogen-adsorption above room temperature.

Ti2O(PO4)2·2H2O (1), a three-dimensional titanium oxophosphate, thermally transforms to Ti2O(PO4)2 (2), a fibrous novel compound. The crystal structure of 2 was solved ab initio using powder X-ray diffraction data (triclinic, P1[combining macron], a = 5.0843(1) Å, b = 8.6121(2) Å, c = 9.6766(2) Å, α = 74.501(2)°, ß = 76.146(2)°, γ = 74.488(3)°, Z = 2). Compound 2, containing both 4- and 6-fold coordinated titanium atoms, shows measurable thermally activated nitrogen-adsorption. To our knowledge, the process described here constitutes the first example of nitrogen-fixation by an inorganic material at above-ambient temperature.

A flow-through reaction cell for in situ X-ray diffraction and absorption studies of heterogeneous powder-liquid reactions and phase transformations.

A portable powder-liquid high-corrosion-resistant reaction cell has been designed to follow in situ reactions by X-ray powder diffraction (XRD) and X-ray absorption spectroscopy (XAS) techniques. The cell has been conceived to be mounted on the experimental stations for diffraction and absorption of the Spanish CRG SpLine-BM25 beamline at the European Synchrotron Radiation Facility. Powder reactants and/or products are kept at a fixed position in a vertical geometry in the X-ray pathway by a porous membrane, under forced liquid reflux circulation. Owing to the short pathway of the X-ray beam through the cell, XRD and XAS measurements can be carried out in transmission configuration/mode. In the case of the diffraction technique, data can be collected with either a point detector or a two-dimensional CCD detector, depending on specific experimental requirements in terms of space or time resolution. Crystallization processes, heterogeneous catalytic processes and several varieties of experiments can be followed by these techniques with this cell. Two experiments were carried out to demonstrate the cell feasibility: the phase transformations of layered titanium phosphates in boiling aqueous solutions of phosphoric acid, and the reaction of copper carbonate and L-isoleucine amino acid powders in boiling aqueous solution. In this last case the shrinking of the solid reactants and the formation of Cu(isoleucine)(2) is observed. The crystallization processes and several phase transitions have been observed during the experiments, as well as an unexpected reaction pathway.

On the crystal structure and thermal decomposition of ammonium-iron(III) bis(hydrogenphosphate).

NH(4)Fe(HPO(4))(2) and its deuterated form have been synthesized as monophasic polycrystalline materials. Their crystal structures, including hydrogen positions, were determined by Rietveld refinement and Fourier synthesis using constant-wavelength neutron powder diffraction data. In addition, the thermal decomposition of NH(4)Fe(HPO(4))(2) was found to give mixtures of Fe(4)(P(2)O(7))(3) and Fe(PO(3))(3)via NH(4)FeP(2)O(7) formation, the crystal structure of which has also been refined from X-ray powder diffraction data.

Phosphorous acid and urea: valuable sources of phosphorus and nitrogen in the hydrothermal synthesis of ammonium-thorium phosphates.

Microcrystals of the first ammonium-thorium phosphates, (NH 4) 2Th(PO 4) 2.H 2O (tetragonal, I4 1/ amd, a = 7.0192(4) A, c = 17.9403(8) A) and NH 4Th 2(PO 4) 3 (monoclinic, C2/ c, a = 17.880(6) A, b = 6.906(1) A, c = 8.152(2) A, beta = 104.39(2) degrees ) were hydrothermally obtained from a Th(NO 3) 4-CO(NH 2) 2-H 3PO 3-H 2O system ( T = 180 degrees C). In both cases, the structure consists of a three-dimensional framework with PO 4 tetrahedra coordinated to Th atoms (ThO n polyhedra, where n = 8 or 9, for the tetragonal or monoclinic phase, respectively). The ammonium ions (and water molecules) are located in the tunnels.

Synthesis and crystal structure of thorium bis(hydrogenphosphate) monohydrate.

Microcrystals of Th(HPO 4) 2.H 2O were hydrothermally obtained from a Th(NO 3) 4-CO(NH 2) 2-H 3PO 3-H 2O system ( T = 180 masculineC). The structure [orthorhombic, Pbca, a = 9.1968(2) A, b = 18.6382(2) A, c = 8.7871(2) A], unlike alpha-Zr(HPO 4) 2.H 2O-type layered compounds, consists of a three-dimensional framework with PO 4 tetrahedra coordinated to Th atoms. The water molecule is also coordinated to the Th atom and projected toward small channels running along the directions of the a and c axes. The ThO 6O(w) environment could be described as a highly distorted pentagonal bipyramid.

New hydrothermal synthesis and structure of Th2(PO4)2(HPO4).H2O: the first structurally characterized thorium Hydrogenphosphate.

Th(2)(PO(4))(2)(HPO(4)).H(2)O was synthesized under wet hydrothermal conditions starting from a mixture of H(3)PO(3) and Th(NO(3))(4).5H(2)O. The crystal structure was solved by powder X-ray diffraction data. The unit cell parameters are a = 6.7023(8) Angstroms, b = 7.0150(8) Angstroms, c = 11.184(1) Angstroms, beta = 107.242(4) degrees, space group P2(1), and Z = 2. The structure consists of layers of both thorium atoms and PO(4) groups, alternating with a layer formed by HPO(4) entities and water molecules. By thermal treatment, this compound turns into Th(4)(PO(4))(4)P(2)O(7), a ceramic already described in the field of the immobilization of tetravalent actinides.

Hydrothermal Synthesis and Structure of Fe(NH(3))(2)PO(4): A Novel Monophosphate.

Fe(NH(3))(2)PO(4) is synthesized under mild hydrothermal conditions in the presence of urea. The crystal structure is solved for powder X-ray diffraction data. The unit cell is orthorhombic, a = 10.1058(2) Å, b = 6.3676(2) Å, c= 7.5714(2) Å, space group Pnma, Z = 4. The structure consists of a three-dimensional network of FeO(4)N(2) octahedra and PO(4) tetrahedra linked by vertex sharing. Two crystallographically independent ammonia molecules are linked to the iron atom. This compound is the first three-dimensional solid structurally characterized containing Fe-NH(3) bonds.