Rheological and Biological Properties of Adhesive Skin Secretions from Eupsophus vertebralis (Anura: Alsodidae).

Skin secretions from Patagonian ground frogs, Eupsophus vertebralis, have previously been reported as a potent proteinaceous adhesive with potential biomedical applications. Here, we conducted a rheological analysis indicating the mechanical robustness of these secretions, with a storage modulus ranging from 1 to 10 Pa. In addition, antimicrobial and cytotoxicity assays were performed, revealing no antimicrobial activity against both the Gram-positive and Gram-negative bacteria. The cytotoxicity results were intriguing, as three samples showed no harm, and one exhibited a severe cytotoxic effect on the human cell line MG63. These properties, as indicated by these preliminary results, reinforce their potential for practical applications in the industrial and medical sectors.

Extracellular lipids of Candida albicans biofilm induce lipid droplet formation and decreased response to a topoisomerase I inhibitor in dysplastic and neoplastic oral cells.

OBJECTIVE: Some microorganisms, i.e., Candida albicans, have been associated with cancer onset and development, although whether the fungus promotes cancer or whether cancer facilitates the growth of C. albicans is unclear. In this context, microbial-derived molecules can modulate the growth and resistance of cancer cells. This study isolated extracellular lipids (ECL) from a 36-h Candida albicans biofilm incubated with oral dysplastic (DOK) and neoplastic (SCC 25) cells, which were further challenged with the topoisomerase I inhibitor camptothecin (CPT), a lipophilic anti-tumoral molecule. METHODOLOGY: ECL were extracted from a 36-h Candida albicans biofilm with the methanol/chloroform precipitation method and identified with Nuclear Magnetic Resonance (1H-NMR). The MTT tetrazolium assay measured ECL cytotoxicity in DOK and SCC 25 cells, alamarBlue™ assessed cell metabolism, flow cytometry measured cell cycle, and confocal microscopy determined intracellular features. RESULTS: Three major classes of ECL of C. albicans biofilm were found: phosphatidylinositol (PI), phosphatidylcholine (PC), and phosphatidylglycerol (PG). The ECL of C. albicans biofilm had no cytotoxic effect on neither cell after 24 hours, with a tendency to disturb the SCC 25 cell cycle profile (without statistical significance). The ECL-induced intracellular lipid droplet (LD) formation on both cell lines after 72 hours. In this context, ECL enhanced cell metabolism, decreased the response to CPT, and modified intracellular drug distribution. CONCLUSION: The ECL (PI, PC, and PG) of 36-h Candida albicans biofilm directly interacts with dysplastic and neoplastic oral cells, highlighting the relevance of better understanding C. albicans biofilm signaling in the microenvironment of tumor cells.

Green nanotechnology for the development of nanoparticles based on alginate associated with essential and vegetable oils for application in fruits and seeds protection.

Aiming to highlight the valorization of the natural products and the green synthesis processes, this work describes the development of a nanoscale system based on the use of alginate to encapsulate a blend of oils (vegetable and essential oils), not previously reported, with antibacterial and antioxidant actions. The study shows the influence of the polymer and surfactant concentrations on the physicochemical properties of the nanoparticles. The formulations were characterized by DLS, zeta potential, efficiency of encapsulation and stability. In addition, the antioxidant and antimicrobial properties of the systems were evaluated using the DPPH method and disk diffusion assays, respectively. The shelf life was studied by coating fruits and seeds. The results showed that the nanostructured system was stable, the efficiency of encapsulation was high and the nanoparticles size range was about 200-400 nm. The coating of fruits and seeds showed that the system was capable of inhibiting the growth of microorganisms and delaying the fruit maturation, indicating its potential for prolonging the shelf-life of fresh food.

The Influence of Primary Atherosclerotic Diseases on the Occurrence of Secondary Disease

Abstract Background Atherosclerosis is a condition in which fats, cholesterol, fibrin, and other substances accumulate into plaque on the arterial walls. Plaque can harden and narrow the arteries, in turn limiting the blood flow and resulting in diseases, such as acute myocardial infarction (AMI), ischemic stroke (IS), or peripheral arterial disease (PAD). There is a fairly high risk of a secondary atherosclerotic event if patients are not treated after the primary episode. Objective To calculate the statistical probability of developing AMI, IS, or PAD after treating the primary disease. Methods Data for statistical probability studies included 507,690 patients with primary atherosclerotic disease, who were in treatment during the study period and who did or did not develop a secondary atherosclerotic disease event. Result Statistical probability data indicate that few AMI patients can develop IS (2.99%) or PAD (2.86%) as a secondary disease. Patients with primary diagnoses of IS showed a 5.07% risk of developing PAD and a 0.95% risk of developing AMI; however, PAD patients showed a higher probability for both AMI (9.17%) and IS (8.79%). Conclusion Secondary atherosclerotic disease episodes after IS, AMI, and PAD were confirmed by statistical probability and are consistent with data from the literature. The study revealed that a primary PAD event leads to high rates of secondary episodes, and special attention should be given to the diagnosis and treatment of PAD in order to decrease the occurrence of secondary events.

Starch-based orodispersible film for diclofenac release

Abstract The form of drug administration affects the success of treatment, since it can influence adherence of the patient to the therapy. The use of orodispersible films has emerged as a way to overcome some drawbacks of conventional methods of drug delivery, especially for patients experiencing difficulty in swallowing. These films are prepared using a matrix that incorporates the drug and contains other substances that confer the properties of the system. The present work describes the use of thermoplastic starch as a carrier for the model drug diclofenac, including film preparation and testing of its orodispersible potential. Preparation of the film employed a microwave oven to gelatinize and plasticize corn starch, with incorporation of the model drug, followed by solvent-casting. The samples were characterized using mechanical tests, analyses of water uptake and water content, and Fourier transform infrared spectroscopy. The results indicated that the film presented promising properties as an alternative system for oral drug administration, with good incorporation and distribution of the drug in the matrix. The material displayed satisfactory mechanical properties, which are crucial for this type of material, due to the need for oral administration and handling before use.

Biodegradable scaffolds based on plant stems for application in regenerative medicine.

Several synthetic and natural materials have been studied for the confection of temporary grafts for application in regenerative medicine, however, the development of a material with adequate properties remains a challenge, mainly because its degradation kinetics in biological systems. Nature provides materials with noble properties that can be used as such for many applications, thus, taking advantage of the available morphology and assembled structures of plants, we propose to study the vegetable stems for use as temporary graft. Since thein vivodegradation is maybe one of the most important features of the temporary grafts, here we have implanted the plant stems from pumpkin, papaya, and castor into the subepithelial tissue of animals and followed their biodegradation process and the local inflammatory response. Mechanical tests, FTIR and contact angle with water were also analysed. The results indicated the mechanical properties and the contact angle were adequate for use in regenerative medicine. The results of thein vivostudies indicated a beneficial inflammatory process and a gradual disintegration of the materials within 60 days, suggesting the plants stems as new and potential materials for development of grafts for use in the field of regenerative medicine.

Conjugation of Ctx(Ile21)-Ha Antimicrobial Peptides to Chitosan Ultrathin Films by N-Acetylcysteine Improves Peptide Physicochemical Properties and Enhances Biological Activity.

The importance of obtaining new compounds with improved antimicrobial activity is a current trend and challenge. Some polymers such as chitosan have shown promising bactericidal properties when they are structurally modified, which is due to the binding versatility provided by their free amines. Likewise, antimicrobial peptides (AMPs) have received attention in recent years because of their bactericidal activity that is similar to or even better than that of conventional drugs, and they exhibit a low induction rate of antimicrobial resistance. Herein, the modified AMP Ctx(Ile21)-Ha-Ahx-Cys was conjugated to chitosan using N-acetylcysteine as an intermediate by the carbodiimide method. Films were prepared using protonated chitosan in 1% acetic acid and Ctx(Ile21)-Ha-Ahx-Cys AMP dissolved in N-acetylcysteine-chitosan; 1.6 mmol of ethylcarbodiimide hydrochloride, 1.2 mmol of N-hydroxysulfosucchimide, and 0.1 mol L -1of N-morpholino)ethanesulfonic acid buffer at pH 6.5 by continuous stirring at 100 × g for 10 min at 37 °C. Physicochemical properties were evaluated by Fourier-transform infrared spectroscopy, differential scanning calorimetry/thermogravimetric analysis, and X-ray diffraction to determine the mechanical properties, solubility, morphology, and thickness. Furthermore, the antimicrobial activities of chitosan-based conjugated films were evaluated againstStaphylococcus aureus,Pseudomonas aeruginosa,SalmonellaTyphimurium, andEscherichia coli. The results showed that the conjugation of a potent AMP could further increase its antibacterial activity and maintain its stable physicochemical properties. Therefore, the developed peptide-chitosan conjugate could be applied as an additive in surgical procedures to prevent and combat bacterial infection.

Hydroalcoholic Extract of Myrcia bella Loaded into a Microemulsion System: A Study of Antifungal and Mutagenic Potential.

Myrcia bella is a medicinal plant used for the treatment of diabetes, hemorrhages, and hypertension in Brazilian folk medicine. Considering that plant extracts are attractive sources of new drugs, the aim of the present study was to verify the influence of incorporating 70% hydroalcoholic of M. bella leaves in nanostructured lipid systems on the mutagenic and antifungal activities of the extract. In this work, we evaluated the antifungal potential of M. bella loaded on the microemulsion against Candida sp for minimum inhibitory concentration, using the microdilution technique. The system was composed of polyoxyethylene 20 cetyl ether and soybean phosphatidylcholine (10%), grape seed oil, cholesterol (10%: proportion 5/1), and purified water (80%). To investigate the mutagenic activity, the Ames test was used with the Salmonella Typhimurium tester strains. M. bella, either incorporated or free, showed an important antifungal effect against all tested strains. Moreover, the incorporation surprisingly inhibited the mutagenicity presented by the extract. The present study attests the antimicrobial properties of M. bella extract, contributing to the search for new natural products with biological activities and suggesting caution in its use for medicinal purposes. In addition, the results emphasize the importance of the use of nanotechnology associated with natural products as a strategy for the control of infections caused mainly by the genus Candida sp.

Synthesis and Biological Properties of Alanine-Grafted Hydroxyapatite Nanoparticles.

Hydroxyapatite attracts great attention as hard tissues implant material for bones and teeth. Its application in reconstructive medicine depends on its biocompatibility, which is in a function of composition and surface properties. The insertion of a protein element in the composition of implants can improve the cell adhesion and the osseointegration. Having this in mind, the proposal of this work was to develop L-alanine-grafted hydroxyapatite nanoparticles and to study their biocompatibility. Two L-alanine sources and three grafting methods were used for hydroxyapatite surface functionalization. The efficiency of grafting was determined based on X-ray powder diffraction, Fourier-transform infrared spectroscopy, thermal analyses, and field-emission scanning electron microscopy. The results indicated the formation of hydroxyapatite with 8-25 wt% of organic content, depending on the grafting method. Protein adsorption, cell adhesion, and viability studies were carried out to evaluate biological properties of grafted materials. The viability of MG-63 human osteoblastic cells following 24 h incubation with the alanine-grafted hydroxyapatite samples is well preserved, being in all cases above the viability of cells incubated with hydroxyapatite. The alanine-grafted hydroxyapatite prepared in situ and by simple mixture showed higher protein adsorption and cell adhesion, respectively, indicating their potential toward use in regenerative medicine.

Extracellular lipids of Candida albicans biofilm induce lipid droplet formation and decreased response to a topoisomerase I inhibitor in dysplastic and neoplastic oral cells

Abstract Objective Some microorganisms, i.e., Candida albicans, have been associated with cancer onset and development, although whether the fungus promotes cancer or whether cancer facilitates the growth of C. albicans is unclear. In this context, microbial-derived molecules can modulate the growth and resistance of cancer cells. This study isolated extracellular lipids (ECL) from a 36-h Candida albicans biofilm incubated with oral dysplastic (DOK) and neoplastic (SCC 25) cells, which were further challenged with the topoisomerase I inhibitor camptothecin (CPT), a lipophilic anti-tumoral molecule. Methodology ECL were extracted from a 36-h Candida albicans biofilm with the methanol/chloroform precipitation method and identified with Nuclear Magnetic Resonance (1H-NMR). The MTT tetrazolium assay measured ECL cytotoxicity in DOK and SCC 25 cells, alamarBlue™ assessed cell metabolism, flow cytometry measured cell cycle, and confocal microscopy determined intracellular features. Results Three major classes of ECL of C. albicans biofilm were found: phosphatidylinositol (PI), phosphatidylcholine (PC), and phosphatidylglycerol (PG). The ECL of C. albicans biofilm had no cytotoxic effect on neither cell after 24 hours, with a tendency to disturb the SCC 25 cell cycle profile (without statistical significance). The ECL-induced intracellular lipid droplet (LD) formation on both cell lines after 72 hours. In this context, ECL enhanced cell metabolism, decreased the response to CPT, and modified intracellular drug distribution. Conclusion The ECL (PI, PC, and PG) of 36-h Candida albicans biofilm directly interacts with dysplastic and neoplastic oral cells, highlighting the relevance of better understanding C. albicans biofilm signaling in the microenvironment of tumor cells.

Bioactive Fibrin Scaffolds for Use in Musculoskeletal Regenerative Medicine

Abstract Autologous fibrin matrices derived from the Leukocyte and Platelet Rich Plasma (L-PRP) and Leukocyte and Platelet Rich Fibrin (L-PRF) techniques present great potential to act as a bioactive scaffold in regenerative medicine, contributing to the maintenance of cell viability, proliferation stimulus and differentiation. In contrast, there are few studies that characterize the bioactive potential of these fibrin scaffolds by considering the process of production. The objective of this work was to characterize the intrinsic potential of maintaining cell viability of different fibrin scaffolds containing platelets and leukocytes. In order to achieve that, blood samples from a volunteer were collected and processed to obtain fibrin clots using the suggested techniques. To characterize the potential for in vitro viability, mesenchymal stem cells from human infrapatellar fat were used. The scaffolds were cellularized (1x105 cells/scaffolds) and maintained for 5 and 10 days under culture conditions with Dulbecco's Modified Eagle Medium, without addition of fetal bovine serum, and subsequently subjected to analyses by Fourrier transform infra-red spectroscopy, circular dichroism and fluorescence microscopy. The results demonstrated distinct intrinsic potential viability between the scaffolds, and L-PRP was responsible for promoting higher levels of viability in both periods of analysis. No viable cells were identified in the fibrin matrix used as controls. These results allow us to conclude that both fibrin substrates have presented intrinsic potential for maintaining cell viability, with superior potential exhibited by L-PRP scaffold, and represent promising alternatives for use as bioactive supports in musculoskeletal regenerative medicine.

Cytotoxic effect of protic ionic liquids in HepG2 and HaCat human cells: in vitro and in silico studies.

Protic ionic liquids (PILs) are innovative chemical compounds, which due to their peculiar nature and amazing physico-chemical properties, have been studied as potential sustainable solvents in many areas of modern science, such as in the industrial fields of textile dyeing, pharmaceuticals, biotechnology, energy and many others. Due to their more than probable large-scale use in a short space of time, a wider analysis in terms of ecotoxicity and biological safety to humans has been attracting significant attention, once many ionic liquids were found to be "a little less than green compounds" towards cells and living organisms. The aim of this study is to investigate the cytotoxicity of 13 recently synthesized PILs, as well as to reinforce knowledge in terms of key thermodynamic magnitudes. All the studied compounds were tested for their in vitro toxic activities on two human cell lines (normal keratinocytes HaCaT and hepatocytes HepG2). In addition, due to the enormous number of possible combinations of anions and cations that can form ionic liquids, a group contribution QSAR model has been tested in order to predict their cytotoxicity. The estimated and experimental values were adequately correlated (correlation coefficient R 2 = 0.9260). The experimental obtained results showed their remarkable low toxicity for the studied in vitro systems.

Bacterial cellulose skin masks-Properties and sensory tests.

BACKGROUND: Bacterial cellulose (BC) is a versatile material produced by microorganisms in the form of a membranous hydrogel, totally biocompatible, and endowed with high mechanical strength. Its high water-holding capacity based on its highly porous nanofibrillar structure allows BC to incorporate and to release substances very fast, thus being suitable for the preparation of skincare masks. AIMS: The preparation and characterization of cosmetic masks based on BC membranes and active cosmetics. METHODS: The masks were prepared by the simple incorporation of the cosmetic actives into BC membranes, used as a swelling matrix. The masks were characterized by Fourier transform infrared (FTIR), scanning electron microscopy (SEM), sensory tests, and skin moisture tests on volunteers. RESULTS: The results of sensory tests revealed the good performance of BC, being considered effective by the panel of volunteers, specially for adhesion to the skin (7.7 at the score scale), and improvement of the skin moisture (the hydration effect increased 76% in 75% of the volunteers that used vegetable extract mask formulation [VEM]), or a decrease in skin hydration (80% of the volunteers showed 32.6% decrease on skin hydration using propolis extract formulation [PEM] treatment), indicating the BC nanofiber membranes can be used to skincare applications. CONCLUSION: The results demonstrate the BC can be used as an alternative support for cosmetic actives for skin treatment.

Enhancing strength and toughness of cellulose nanofibril network structures with an adhesive peptide.

The mechanical properties of cellulose nanofibrils network structure are essential for their applications in functional materials. In this work, an adhesive peptide consisting of just 11 amino acid residues with a hydrophobic core sequence of FLIVI (F - phenylalanine, L - leucine, I - isoleucine, V - valine) flanked by three lysine (K) residues was adsorbed to 2,2,6,6-Tetramethyl-1-piperidinyloxy radical (TEMPO) oxidized cellulose nanofibrils (TO-CNF). Composite films were prepared by solution casting from water suspensions of TO-CNF adsorbed with the adhesive peptide. The nanofibrils network structure of the composite was characterized by atomic force microscopy (AFM). The structure of the peptide in the composites and the interactions between TO-CNF and the peptide were studied by Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD). The mechanical properties of the composites were characterized by tensile tests and dynamic mechanical analysis (DMA). With 6.3wt.% adhesive peptide adsorbed onto TO-CNF, the composite showed a modulus of 12.5±1.4GPa, a tensile strength of 344.5±(15.3)MPa, and a strain to failure of 7.8±0.4%, which are 34.4%, 48.8%, and 23.8% higher than those for neat TO-CNF, respectively. This resulted in significantly improved toughness (work to fracture) for the composite, 77% higher than that for the neat TO-CNF.

Furan-modified natural rubber: A substrate for its reversible crosslinking and for clicking it onto nanocellulose.

The conventional vulcanization process applied to elastomers is irreversible and hinders therefore their useful recycling. We demonstrate here that natural rubber can be reversibly crosslinked via the Diels-Alder coupling of furan and maleimide moieties. The furan-modified natural rubber used in this strategy was also exploited to bind it to maleimide-modified nanocellulose, thus generating a covalently crosslinked composite of these two renewable polymers.

Guava: phytochemical composition of a potential source of antioxidants for cosmetic and/or dermatological applications

ABSTRACT Guava (Psidium guajava L.) is a native fruit of the American tropics with commercial applications for its taste, flavor and aroma. Numerous pharmacological uses have been described for it, such as the antiseptic effect of its leaves, the use of the fresh fruit and tea from its leaves for the treatment of diarrhea, dysentery, diabetes mellitus, and others. However, considering its rich composition, the guava also is a potential source of antioxidants to be used in the development of new formulations for cosmetic and/or dermatological applications, the main focus of this research. Herein, we describe the study of the phytochemical composition and the antioxidant activity of a guava extract prepared with non-toxic solvents aiming its use at biological applications. High performance liquid chromatography and mass spectrometry were employed to identify the major components, while thermoanalytical measurements and hot stage microscopy were used to assess the chemical stability of guava fruit extract. The antioxidant activity was also evaluated assessing the SOD-like activity and ABTS free radical scavenger. The results show that the extract is a rich source of phenolic compounds, such as quercetin, kaempferol, schottenol, among many others. All of the components found in guava extract exhibit biological effects according to the literature data, mainly antioxidant properties.

DETC-based bacterial cellulose bio-curatives for topical treatment of cutaneous leishmaniasis.

The treatment of leishmaniasis still relies on drugs with potentially serious adverse effects. Herein, we tested a topical formulation of bacterial cellulose (BC) membranes containing Diethyldithiocarbamate (DETC), a superoxide dismutase 1 inhibitor. Leishmania-infected macrophages exposed to BC-DETC resulted in parasite killing, without pronounced toxic effects to host cells. This outcome was associated with lower SOD1 activity and higher production of superoxide and cytokine mediators. Topical application of BC-DETC significantly decreased lesion size, parasite load and the inflammatory response at the infection site, as well as the production of both IFN-γ and TNF. Combination of topical BC-DETC plus intraperitoneal Sbv also significantly reduced disease development and parasite load. The leishmanicidal effect of BC-DETC was extended to human macrophages infected with L. braziliensis, highlighting the feasibility of BC-DETC as a topical formulation for chemotherapy of cutaneous leishmaniasis caused by L. braziliensis.

Komagataeibacter rhaeticus as an alternative bacteria for cellulose production.

A strain isolated from Kombucha tea was isolated and used as an alternative bacterium for the biosynthesis of bacterial cellulose (BC). In this study, BC generated by this novel bacterium was compared to Gluconacetobacter xylinus biosynthesized BC. Kinetic studies reveal that Komagataeibacter rhaeticus was a viable bacterium to produce BC according to yield, thickness and water holding capacity data. Physicochemical properties of BC membranes were investigated by UV-vis and Fourier transform infrared spectroscopies (FTIR), thermogravimetrical analysis (TGA) and X-ray diffraction (XRD). Additionally, scanning electron microscopy (SEM) and atomic force microscopy (AFM) were also used for morphological characterization. Mechanical properties at nano and macroscale were studied employing PeakForce quantitative nanomechanical property mapping (QNM) and dynamic mechanical analyzer (DMA), respectively. Results confirmed that BC membrane biosynthesized by Komagataeibacter rhaeticus had similar physicochemical, morphological and mechanical properties than BC membrane produced by Gluconacetobacter xylinus and can be widely used for the same applications.

Recycling tires? Reversible crosslinking of poly(butadiene).

Furan-modified poly(butadiene) prepared by the thiol-ene click reaction is crosslinked with bismaleimides through the Diels-Alder reaction, giving rise to a novel recyclable elastomer. This is possible because of the thermal reversibility of the adducts responsible for the formation of the network. The use of this strategy provides the possibility to produce recyclable tires.