Algae-constructed wetland integrated system for wastewater treatment: A review.

Integrating algae into constructed wetlands (CWs) enhances wastewater treatment, although the results vary. This review evaluates the role of algae in CWs and the performance of different algae-CW (A-CW) configurations based on literature and meta-analysis. Algae considerably improve N removal, although their impact on other parameters varies. Statistical analysis revealed that 70 % of studies report improved treatment efficiencies with A-CWs, achieving average removal rates of 75 % for chemical oxygen demand (COD), 74 % for total nitrogen and ammonium nitrogen, and 79 % for total phosphorus (TP). This review identifies hydraulic retention times, which average 3.1 days, and their varied impact on treatment efficacy. Mixed-effects models showed a slight increase in COD and TP removal efficiencies of 0.6 % every ten days in the A-CWs. Future research should focus on robust experimental designs, adequate algal storage and separation techniques, and advanced modeling to optimize the treatment potential of algae in CWs.

First report of pepper yellow leaf curl Thailand virus infecting hot chili in central Vietnam and Laos.

Hot chili pepper (Capsicum annuum) cultivation has been on the rise in South East Asia to meet export demands. In Thailand, the top chili exporter in South East Asia, chili production has been severely hampered by pepper yellow leaf curl disease (YLCD) caused by the begomovirus pepper yellow leaf curl Thailand virus (PepYLCThV) (Chiemsombat et al., 2018; Suwor et al., 2021). In the neighbouring countries of Laos and Vietnam, a limited survey of chili fields (200 plants in total) in Savannakhet (Savannakhet University campus, n = 150), Laos and Quang Nam province (Ka Dang commune, Dong Giang district, n = 50), central Vietnam in 2023 led to the finding of eight plants (5 in Laos and 3 in Vietnam) exhibiting YLCD-like symptoms, which included bright yellow color in young leaves and leaf curl and mosaic chlorosis in mature leaves (Fig. S1). Total DNA was extracted from leaves of two symptomatic plants (one from Savannakhet and one from Quang Nam) using a cetyltrimethylammonium bromide-based DNA extraction protocol (Doyle & Doyle, 1987; Nguyen et al., 2023). Next, PCR were performed using newly designed PepYLCThV-specific primers based on PepYLCThV sequences in GenBank (Table 1). PCR products of expected sizes were observed in samples with disease symptoms, but not from DNA extracted from C. annuum (cv. VA.99999) grown at the Institute of Biotechnology in Thua Thien Hue, Vietnam (Fig. S2). The amplicons were Sanger sequenced (Apical Scientific, Selangor, Malaysia) and the complete bipartite genome sequence of two isolates ('Sava01' from Laos and 'QNam01' from Vietnam) were obtained. The sequences of the DNA-A component from isolates 'Sava01' (GenBank PP437580) and 'QNam01' (GenBank PP437581) exhibited the highest sequence identity of 99.2% and 94.7% with the PepYLCThV isolate 'ChiangDaoS1' (GenBank OM677627), respectively (Table 2). Conversely, the sequences of the DNA-B component from the isolates 'Sava01' (GenBank PP437579) and 'QNam01' (GenBank PP437582) exhibited the highest similarity of 91.8% and 90.9% with the PepYLCThV isolate 'KKN601' (GenBank MW715820), respectively (Table 2). These results confirmed the presence of PepYLCThV in hot chili pepper plants exhibiting YLCD-like symptoms in central Vietnam and Laos. Infectious clones of PepYLCThV DNA-A and DNA-B (isolate 'QNam01') were created based on the pLX-AS vector as described by Pasin (2022), and transformed into Agrobacterium tumefaciens EHA105. The resulting bacteria were cultured in LB broth containing rifampicin (25 µg/mL) and kanamycin (50 µg/mL) at 28°C and used for agroinoculation of Nicotiana benthamiana (n = 6) and C. annuum (cv. VA.99999, n = 6) (4-6 leaf plants) as described by Pasin (2022). In all N. benthamiana plants, agroinoculation with both DNA-A and DNA-B infectious clones caused stunted growth, severe leaf curl, with yellow and white patches 21 days post inoculation (Fig. S3). In C. annuum plants, symptom expression, which included leaf curl and stunted leaves with yellow mosaic patterns, was observed in two out of six inoculated plants six weeks postinoculation (Fig. S3). PCR assays confirmed the presence of PepYLCThV DNA in N. benthamiana and C. annuum symptomatic leaves (Fig. S4). To our knowledge, this is the first report of pepper yellow leaf curl Thailand virus in hot chili pepper in Laos and central Vietnam. Appropriate containment and management strategies should be developed and implemented to control the spread of this disease in hot chili pepper crops in both countries.

Photocatalytic degradation of antibiotic sulfamethizole by visible light activated perovskite LaZnO3.

In this work, the perovskite LaZnO3 was synthesized via sol-gel method and applied for photocatalytic treatment of sulfamethizole (SMZ) antibiotics under visible light activation. SMZ was almost completely degraded (99.2% ± 0.3%) within 4 hr by photocatalyst LaZnO3 at the optimal dosage of 1.1 g/L, with a mineralization proportion of 58.7% ± 0.4%. The efficient performance of LaZnO3 can be attributed to its wide-range light absorption and the appropriate energy band edge levels, which facilitate the formation of active agents such as ·O2-, h+, and ·OH. The integration of RP-HPLC/Q-TOF-MS and DFT-based computational techniques revealed three degradation pathways of SMZ, which were initiated by the deamination reaction at the aniline ring, the breakdown of the sulfonamide moieties, and a process known as Smile-type rearrangement and SO2 intrusion. Corresponding toxicity of SMZ and the intermediates were analyzed by quantitative structure activity relationship (QSAR), indicating the effectiveness of LaZnO3-based photocatalysis in preventing secondary pollution of the intermediates to the ecosystem during the degradation process. The visible-light-activated photocatalyst LaZnO3 exhibited efficient performance in the occurrence of inorganic anions and maintained high durability across multiple recycling tests, making it a promising candidate for practical antibiotic treatment.

Recent advancements in modifications of metal-organic frameworks-based materials for enhanced water purification and contaminant detection.

Metal-organic frameworks (MOFs) have emerged as a key focus in water treatment and monitoring due to their unique structural features, including extensive surface area, customizable porosity, reversible adsorption, and high catalytic efficiency. While numerous reviews have discussed MOFs in environmental remediation, this review specifically addresses recent advancements in modifying MOFs to enhance their effectiveness in water purification and monitoring. It underscores their roles as adsorbents, photocatalysts, and in luminescent and electrochemical sensing. Advancements such as pore modification, defect engineering, and functionalization, combined synergistically with advanced materials, have led to the development of recyclable MOF-based nano-adsorbents, Z-scheme photocatalytic systems, nanocomposites, and hybrid materials. These innovations have broadened the spectrum of removable contaminants and improved material recyclability. Additionally, this review delves into the creation of multifunctional MOF materials, the development of robust MOF variants, and the simplification of synthesis methods, marking significant progress in MOF sensor technology. Furthermore, the review addresses current challenges in this field and proposes potential future research directions and practical applications. The growing research interest in MOFs underscores the need for an updated synthesis of knowledge in this area, focusing on both current challenges and future opportunities in water remediation.

Exploring optical descriptors for rapid estimation of coastal sediment organic carbon and nearby land-use classifications via machine learning models.

This study utilizes ultraviolet and fluorescence spectroscopic indices of dissolved organic matter (DOM) from sediments, combined with machine learning (ML) models, to develop an optimized predictive model for estimating sediment total organic carbon (TOC) and identifying adjacent land-use types in coastal sediments from the Yellow and Bohai Seas. Our results indicate that ML models surpass traditional regression techniques in estimating TOC and classifying land-use types. Penalized Least Squares Regression (PLR) and Cubist models show exceptional TOC estimation capabilities, with PLR exhibiting the lowest training error and Cubist achieving a correlation coefficient 0.79. In land-use classification, Support Vector Machines achieved 85.6 % accuracy in training and 92.2 % in testing. Maximum fluorescence intensity and ultraviolet absorbance at 254 nm were crucial factors influencing TOC variations in coastal sediments. This study underscores the efficacy of ML models utilizing DOM optical indices for near real-time estimation of marine sediment TOC and land-use classification.

Smartphone-based paper strip assay for putrescine and spermidine detection using hybrid organic-inorganic perovskite with Eu3+ complex.

A new method utilizing fluorescent ratiometry is proposed for detecting putrescine and spermidine. The method involves the use of a fluorescent probe comprising a 2D halide perovskite synthesized from octadecylamine-iodine and PbI2via a grinding-sonicating technique, along with a Eu3+-complex. Upon excitation at 290 nm, the probe fluoresces at two distinguishable wavelengths. The addition of putrescine and spermidine significantly decreases the emission of the 2D halide perovskite at 496 nm, while the emission of the Eu3+-complex at 618 nm remains stable. The color changes of the probe depend on the concentration of putrescine and spermidine, and the assay offers linearity over a wide concentration range (30-4000 ng mL-1), a low detection limit (4 ng mL-1 for putrescine, and 7 ng mL-1 for spermidine), and a quick response time. Furthermore, a portable device based on a smartphone can be used to record the color change of the paper test strip using the prepared fluorescent materials. The fluorescence quenching mechanism of the probe is explained as dynamic quenching.

Using CuMgFe layered double oxide to replace laccase as a catalyst for abiotic humification.

Humification offers a promising avenue for sequestering dissolved organic carbon while facilitating environmental cleanup. In this study, CuMgFe layered double oxides (LDO) were applied as a catalyst to replace conventional enzymes, such as laccase, thereby enhancing the in vitro polyphenol-Maillard humification reaction. CuMgFe LDO was synthesized through calcination of CuMgFe layered double hydroxides (LDH) at 500 °C for 5 h. A suite of characterization methods confirmed the successful formation into mixed oxides (Cu2O, CuO, MgO, FeO, and Fe2O3) after thermal treatment. A rapid humification reaction was observed with CuMgFe LDO, occurring within a two-week span, likely due to a distinct synergy between copper and iron elements. Subsequent analyses identified that MgO in CuMgFe LDO also played a pivotal role in humification by stabilizing the pH of the reaction. In the absence of magnesium, LDO's humification activity was more pronounced in the early stages of the reaction, but it rapidly diminished as the reaction progressed. The efficiency of CuMgFe LDO was heightened at elevated temperatures (35 °C), while light conditions manifested a discernible effect, with a modest decrease in humification efficacy under indoor light exposure. CuMgFe LDO surpassed both laccase and MgFe LDH in performance, boasting a superior humification efficiency relative to its precursor, CuMgFe LDH. The catalysts' humification activity was modulated by their crystallinity and valence dynamics. Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) results suggested that introducing the amino acid, glycine, expedited the CuMgFe LDO-fueled humification, enhancing the formation of C-N and C-C bonds in the resultant products. The humic-like substances derived from the catalyst-enhanced reaction displayed an elevated presence of aromatic configurations and a richer array of oxygen functional groups in comparison to a typical commercial humic material.

Identification of mebendazole as an ethylene signaling activator reveals a role of ethylene signaling in the regulation of lateral root angles.

The lateral root angle or gravitropic set-point angle (GSA) is an important trait for root system architecture (RSA) that determines the radial expansion of the root system. The GSA therefore plays a crucial role for the ability of plants to access nutrients and water in the soil. Only a few regulatory pathways and mechanisms that determine GSA are known. These mostly relate to auxin and cytokinin pathways. Here, we report the identification of a small molecule, mebendazole (MBZ), that modulates GSA in Arabidopsis thaliana roots and acts via the activation of ethylene signaling. MBZ directly acts on the serine/threonine protein kinase CTR1, which is a negative regulator of ethylene signaling. Our study not only shows that the ethylene signaling pathway is essential for GSA regulation but also identifies a small molecular modulator of RSA that acts downstream of ethylene receptors and that directly activates ethylene signaling.

Morphological, phytochemical and genetic characterization of Centella asiatica accessions collected throughout Vietnam and Laos.

Pennywort (Centella asiatica L.) is commonly grown in the tropical world for its nutritional and medicinal values. Valuable saponins in pennywort are extensively investigated for their anti-tumour activities. The diversity in morphology, phytochemical contents and genetics among pennywort accessions has been extensively studied to identify elite landraces for large-scale production. While pennywort is widely consumed in Vietnam, a systematic characterization of their diverse morphology, secondary metabolites and genetics is lacking. In this work, 26 pennywort accessions were collected across Vietnam and Laos. Their morphological features and yields were characterized under uniform agro-climatic conditions at Hue city in central Vietnam. The highest yield was obtained with HUIB_CA20 (478 g per tray), compared to the lowest yield in HUIB_CA19 (107 g per tray). Furthermore, a range of phytochemical markers, including vitamin C, reducing sugar, carotenoid, tannin, phenolic, flavonoid and saponin contents, were determined. Based on yield, phenolic and flavonoid contents, HUIB_CA20 and HUIB_CA27 were determined to be elite cultivars in this germplasm. Finally, microsatellite analysis was performed to explore the genetic diversity within the germplasm. Using fourteen SSR primer pairs, a total of 47 alleles were identified with 45 alleles (96 %) being polymorphic. These results will be useful for breeding programs aiming to create elite pennywort cultivars with enhanced properties.

Construction of a uniform zeolitic imidazole framework (ZIF-8) nanocrystal through a wet chemical route towards supercapacitor application.

Exploring larger surface area electrode materials is crucial for the development of an efficient supercapacitors (SCs) with superior electrochemical performance. Herein, a cost-effective strategy was adopted to synthesize a series of ZIF8 nanocrystals, and their size effect as a function of surface area was also examined. The resultant ZIF8-4 nanocrystal exhibits a uniform hexagonal structure with a large surface area (2800 m2 g-1) and nanometre size while maintaining a yield as high as 78%. The SCs performance was explored by employing different aqueous electrolytes (0.5 M H2SO4 and 1 M KOH) in a three-electrode set-up. The SC performance using a basic electrolyte (1 M KOH) was superior owing to the high ionic mobility of K+. The optimized ZIF8-4 nanocrystal electrode showed a faradaic reaction with a highest capacitance of 1420 F g-1 at 1 A g-1 of current density compared to other as-prepared electrodes in the three-electrode assembly. In addition, the resultant ZIF8-4 was embedded into a symmetric supercapacitor (SSC), and the device offered 350 F g-1 of capacitance with a maximum energy and power density of 43.7 W h kg-1 and 900 W kg-1 at 1 A g-1 of current density, respectively. To determine the practical viewpoint and real-world applications of the ZIF8-4 SSC device, 7000 GCD cycles were performed at 10 A g-1 of current density. Significantly, the device exhibited a cycling stability around 90% compared to the initial capacitance. Therefore, these findings provide a pathway for constructing large surface area ZIF8-based electrodes for high-value-added energy storage applications, particularly supercapacitors.

Tungsten-based nanocatalysts with different structures for visible light responsive photocatalytic degradation of bisphenol A.

Environmental pollution, such as water contamination, is a critical issue that must be absolutely addressed. Here, three different morphologies of tungsten-based photocatalysts (WO3 nanorods, WO3/WS2 nanobricks, WO3/WS2 nanorods) are made using a simple hydrothermal method by changing the solvents (H2O, DMF, aqueous HCl solution). The as-prepared nanocatalysts have excellent thermal stability, large porosity, and high hydrophilicity. The results show all materials have good photocatalytic activity in aqueous media, with WO3/WS2 nanorods (NRs) having the best activity in the photodegradation of bisphenol A (BPA) under visible-light irradiation. This may originate from increased migration of charge carriers and effective prevention of electron‒hole recombination in WO3/WS2 NRs, whereby this photocatalyst is able to generate more reactive •OH and •O2- species, leading to greater photocatalytic activity. About 99.6% of BPA is photodegraded within 60 min when using 1.5 g/L WO3/WS2 NRs and 5.0 mg/L BPA at pH 7.0. Additionally, the optimal conditions (pH, catalyst dosage, initial BPA concentration) for WO3/WS2 NRs are also elaborately investigated. These rod-like heterostructures are expressed as potential catalysts with excellent photostability, efficient reusability, and highly active effectivity in different types of water. In particular, the removal efficiency of BPA by WO3/WS2 NRs reduces by only 1.5% after five recycling runs and even reaches 89.1% in contaminated lake water. This study provides promising insights for the nearly complete removal of BPA from wastewater or different water resources, which is advantageous to various applications in environmental remediation.

Quantitative source tracking for organic foulants in ultrafiltration membrane using stable isotope probing approach.

Quantitatively identifying the primary sources of organic membrane fouling is essential for the effective implementation of membrane technology and optimal water resource management prior to the treatment. This study leveraged carbon stable isotope tracers to estimate the quantitative contributions of various organic sources to membrane fouling in an ultrafiltration system. Effluent organic matter (EfOM) and aquatic natural organic matter (NOM), two common sources, were combined in five different proportions to evaluate their mixed effects on flux decline and the consequent fouling behaviors. Generally, biopolymer (BP) and low molecular weight neutral (LMWN) size fractions - abundantly present in EfOM - were identified as significant contributors to reversible and irreversible fouling, respectively. Fluorescence spectroscopy disclosed that a protein-like component notably influenced overall membrane fouling, whereas humic-like components were predominantly responsible for irreversible fouling rather than reversible fouling. Fluorescence index (FI) and biological index (BIX), common fluorescence source tracers, showed promise in determining the source contribution for reversible foulants. However, these optical indices were insufficient in accurately determining individual source contributions to irreversible fouling, resulting in inconsistencies with the observed hydraulic analysis. Conversely, applying a carbon stable isotope-based mixing model yielded reasonable estimates for all membrane fouling. The contribution of EfOM surpassed 60 % for reversible fouling and increased with its content in DOM source mixtures. In contrast, aquatic NOM dominated irreversible fouling, contributing over 85 %, regardless of the source mixing ratios. This study emphasizes the potential of stable isotope techniques in accurately estimating the contributions of different organic matter sources to both reversible and irreversible membrane fouling.

Structural Characterization and Cytotoxic Activity Evaluation of Ulvan Polysaccharides Extracted from the Green Algae Ulva papenfussii.

Ulvan, a sulfated heteropolysaccharide with structural and functional properties of interest for various uses, was extracted from the green seaweed Ulva papenfussii. U. papenfussii is an unexplored Ulva species found in the South China Sea along the central coast of Vietnam. Based on dry weight, the ulvan yield was ~15% (w/w) and the ulvan had a sulfate content of 13.4 wt%. The compositional constitution encompassed L-Rhamnose (Rhap), D-Xylose (Xylp), D-Glucuronic acid (GlcAp), L-Iduronic acid (IdoAp), D-Galactose (Galp), and D-Glucose (Glcp) with a molar ratio of 1:0.19:0.35:0.52:0.05:0.11, respectively. The structure of ulvan was determined using High-Performance Liquid Chromatography (HPLC), Fourier Transform Infrared Spectroscopy (FT-IR), and Nuclear Magnetic Resonance spectroscopy (NMR) methods. The results showed that the extracted ulvan comprised a mixture of two different structural forms, namely ("A3s") with the repeating disaccharide [→4)-ß-D-GlcAp-(1→4)-α-L-Rhap 3S-(1→]n, and ("B3s") with the repeating disaccharide [→4)-α-L-IdoAp-(1→4)-α-L-Rhap 3S(1→]n. The relative abundance of A3s, and B3s was 1:1.5, respectively. The potential anticarcinogenic attributes of ulvan were evaluated against a trilogy of human cancer cell lineages. Concomitantly, Quantitative Structure-Activity Relationship (QSAR) modeling was also conducted to predict potential adverse reactions stemming from pharmacological interactions. The ulvan showed significant antitumor growth activity against hepatocellular carcinoma (IC50 ≈ 90 µg/mL), human breast cancer cells (IC50 ≈ 85 µg/mL), and cervical cancer cells (IC50 ≈ 67 µg/mL). The QSAR models demonstrated acceptable predictive power, and seven toxicity indications confirmed the safety of ulvan, warranting its candidacy for further in vivo testing and applications as a biologically active pharmaceutical source for human disease treatment.

Cu2O/Fe3O4/UiO-66 nanocomposite as an efficient fenton-like catalyst: Performance in organic pollutant degradation and influencing factors based machinelearning.

The persistent presence of organic pollutants like dyes in water environment necessitates innovative approaches for efficient degradation. In this research, we developed an advanced hybrid catalyst by combining metal oxides (Cu2O, Fe3O4) with UiO-66, serving as a heterogeneous Fenton catalyst for for efficient RB19 breakdown in water with H2O2. The control factors to the catalytic behavior were also quantified by machine learning. Experimental results show that the catalytic performance was much better than its individual components (P < 0.05 & non-zero 95% C.I). The improved catalytic efficiency was linked to the occurrence of active metal centers (Fe, Cu, and Zr), with Cu(I) from Cu2O playing a crucial role in promoting increased production of HO•. Also, UiO-66 served as a catalyst support, attracting pollutants to the reaction center, while magnetic Fe3O4 aids catalyst recovery. The optimal experimental parameters for best performance were pH at 7, catalyst loading of 1.6 g/L, H2O2 strength of 0.16 M, and reaction temperature of 25 °C. The catalyst can be magnetically separated and regenerated after five recycling times without significantly reducing catalytic activity. The reaction time and pH were ranked as the most influencing factors on catalytic efficiency via Random Forest and SHapley Additive exPlanations models. The findings show that developed catalyst is a suitable candidate to remove dyes in water by Fenton heterogeneous reaction.

Recent advances in g-C3N4-based photocatalysis for water treatment: Magnetic and floating photocatalysts, and applications of machine-learning techniques.

Over the past decade, there has been a substantial increase in research investigating the potential of graphitic carbon nitride (g-C3N4) for various environmental remediations. Renowned for its photocatalytic activity under visible light, g-C3N4 offers a promising solution for treating water pollutants. However, traditional g-C3N4-based photocatalysts have inherent drawbacks, creating a disparity between laboratory efficacy and real-world applications. A primary practical challenge is their fine-powdered form, which hinders separation and recycling processes. A promising approach to address these challenges involves integrating magnetic or floating materials into conventional photocatalysts, a strategy gaining traction within the g-C3N4-based photocatalyst arena. Another emerging solution to enhance practical applications entails merging experimental results with contemporary computational methods. This synergy seeks to optimize the synthesis of more efficient photocatalysts and pinpoint optimal conditions for pollutant removal. While numerous review articles discuss the laboratory-based photocatalytic applications of g-C3N4-based materials, there is a conspicuous absence of comprehensive coverage regarding state-of-the-art research on improved g-C3N4-based photocatalysts for practical applications. This review fills this void, spotlighting three pivotal domains: magnetic g-C3N4 photocatalysts, floating g-C3N4 photocatalysts, and the application of machine learning to g-C3N4 photocatalysis. Accompanied by a thorough analysis, this review also provides perspectives on future directions to enhance the efficacy of g-C3N4-based photocatalysts in water purification.

Ni, Co, Zn, and Cu metal-organic framework-based nanomaterials for electrochemical reduction of CO2: A review.

The combustion of fossil fuels has resulted in the amplification of the greenhouse effect, primarily through the release of a substantial quantity of carbon dioxide into the atmosphere. The imperative pursuit of converting CO2 into valuable chemicals through electrochemical techniques has garnered significant attention. Metal-organic frameworks (MOFs) have occured as highly prospective materials for the reduction of CO2, owing to their exceptional attributes including extensive surface area, customizable architectures, pronounced porosity, abundant active sites, and well-distributed metallic nodes. This article commences by elucidating the mechanistic aspects of CO2 reduction, followed by a comprehensive exploration of diverse materials encompassing MOFs based on nickel, cobalt, zinc, and copper for efficient CO2 conversion. Finally, a meticulous discourse encompasses the challenges encountered and the prospects envisioned for the advancement of MOF-based nanomaterials in the realm of electrochemical reduction of CO2.

Metal-organic framework-based nanomaterials for CO2 storage: A review.

The increasing recognition of the impact of CO2 emissions as a global concern, directly linked to the rise in global temperature, has raised significant attention. Carbon capture and storage, particularly in association with adsorbents, has occurred as a pivotal approach to address this pressing issue. Large surface area, high porosity, and abundant adsorption sites make metal-organic frameworks (MOFs) promising contenders for CO2 uptake. This review commences by discussing recent advancements in MOFs with diverse adsorption sites, encompassing open metal sites and Lewis basic centers. Next, diverse strategies aimed at enhancing CO2 adsorption capabilities are presented, including pore size manipulation, post-synthetic modifications, and composite formation. Finally, the extant challenges and anticipated prospects pertaining to the development of MOF-based nanomaterials for CO2 storage are described.

Characterization and Bioactivity of Piper chaudocanum L. Extract-Doped ZnO Nanoparticles Biosynthesized by Co-Precipitation Method.

Green synthesis and nanomaterials have been the current trends in biomedical materials. In this study, Piper chaudocanum L. leaf extract-doped ZnO nanoparticles (PLE-doped ZnO NPs), a novel nanomaterial, were studied including the synthesis process, and the biomedical activity was evaluated. PLE-doped ZnO NPs were synthesized by the co-precipitation method, with differences in the synthesis procedures and dosages of the extract. The X-ray diffraction, Fourier transform infrared, scanning electron microscopy, energy dispersive X-ray spectroscopy, Brunauer-Emmett-Teller, ultraviolet-visible diffuse reflectance spectroscopy, and photoluminescence spectrum analysis results showed that the biosynthesized PLE-doped ZnO NPs were pure and in a hexagonal wurtzite phase. The PLE-doped NPs were synthesized by adding the extract to the zinc acetate solution before adjusting the pH and exhibited the smallest size (ZPS50 was 22 nm), the richest in the surface organic functional groups and the best optical activity. The highest antibacterial activity against P. aeruginosa and S. aureus was observed at 100 µg/mL of ZPS50 NPs, and the inhibition zone reached 42 and 39 nm, respectively. Moreover, ZPS50 NPs showed a moderate effectiveness against KB cancer cells with an IC50 value of 43.53 ± 2.98 µg/mL. This present study's results suggested that ZPS50 NPs could be a promising nanomaterial in developing drugs for treating human epithelial carcinoma cells and infectious illnesses.

A novel diphenylbutenoid-type compound from the rhizomes of Zingiber montanum (J.Koenig) Link ex A.Dietr. (Zingiberaceae).

From the EtOAc-soluble extract of the rhizomes of Zingiber montanum (J.Koenig) Link ex A.Dietr., a novel diphenylbutenoid, montadinin A (1) and a previously unreported phenylbutenoid compound, 1-(3,4-dimethoxyphenyl)but-3-en-2-ol (7), in natural source were isolated. Additionally, seven known phenylbutenoids were also identified. The structures of all compounds were elucidated through NMR spectroscopic interpretation. Compounds cis-3-(3,4-dimethoxyphenyl)-4-[(E)-3,4-dimethoxystyryl]cyclohex-1-ene (2), cis-4-[(E)-3,4-dimethoxystyryl]-3-(2,4,5-trimethoxyphenyl)cyclohex-1-ene (3), trans-3-(3,4,-dimethoxyphenyl)-4-[(E)-2,4,5-trimethoxystyryl]cyclohex-1-ene (5), and cis-3-(3,4-dimethoxyphenyl)-4-[(Z)-2,4,5-trimethoxylstyryl]cyclohex-1-ene (6) showed weak cytotoxicity against HepG2 cells with IC50 values of 122.9, 127.3, 257.5, and 168.5 µM, respectively.

Enhanced growth performance of abi5 plants under high salt and nitrate is associated with reduced nitric oxide levels.

Numerous environmental stresses have a significant impact on plant growth and development. By 2050, it is anticipated that high salinity will destroy more than fifty percent of the world's agricultural land. Understanding how plants react to the excessive use of nitrogen fertilizers and salt stress is crucial for enhancing crop yield. However, the effect of excessive nitrate treatment on plant development is disputed and poorly understood; so, we evaluated the effect of excessive nitrate supply and high salinity on abi5 plant growth performance. We demonstrated that abi5 plants are tolerant to the harmful environmental conditions of excessive nitrate and salt. abi5 plants have lower amounts of endogenous nitric oxide than Arabidopsis thaliana Columbia-0 plants due to their decreased nitrate reductase activity, caused by a decrease in the transcript level of NIA2, a gene encoding nitrate reductase. Nitric oxide appeared to have a critical role in reducing the salt stress tolerance of plants, which was diminished by an excess of nitrate. Discovering regulators such as ABI5 that can modulate nitrate reductase activity and comprehending the molecular activities of these regulators are crucial for the application of gene-editing techniques. This would result in the appropriate buildup of nitric oxide to increase the production of crops subjected to a variety of environmental stresses.