Alignment of Breathing Metal-Organic Framework Particles for Enhanced Water-Driven Actuation.

As the majority of known metal-organic frameworks (MOFs) possess anisotropic crystal lattices and thus anisotropic physicochemical properties, a pressing practical challenge in MOF research is the establishment of robust and simple processing methods to fully harness the anisotropic properties of the MOFs in various applications. We address this challenge by applying an E-field to precisely align MIL-88A microcrystals and generate MIL-88A@polymer films. Thereafter, we demonstrate the impact of MOF crystal alignment on the actuation properties of the films as a proof of concept. We investigate how different anisotropies of the MIL-88A@polymer films, specifically, crystal anisotropy, particle alignment, and film composition, can lead to the synergetic enhancement of the film actuation upon water exposure. Moreover, we explore how the directionality in application of the external stimuli (dry/humid air stream, water/air interface) affects the direction and the extent of the MIL-88A@polymer film movement. Apart from the superior water-driven actuation properties of the developed films, we demonstrate by dynamometer measurements the higher degree of mechanical work performed by the aligned MIL-88A@polymer films with the preserved anisotropies compared to the unaligned films. The insights provided by this work into anisotropic properties displayed by aligned MIL-88A@polymer films promise to translate crystal performance benefits measured in laboratories into real-world applications. We anticipate that our work is a starting point to utilize the full potential of anisotropic properties of MOFs.

Pr3+ doped NaYF4 and LiYF4 nanocrystals combining visible-to-UVC upconversion and NIR-to-NIR-II downconversion luminescence emissions for biomedical applications.

Lanthanide-doped fluoride nanocrystals (NCs) are known to exhibit unique optical properties, such as upconversion and downconversion luminescence (UCL and DCL), which can be employed for various applications. In this work, we demonstrate that by doping praseodymium(III) and ytterbium(III) ions (Pr3+ and Yb3+) into a nanosized fluoride matrix (i.e. NaYF4 and LiYF4), it is possible to combine their UCL and DCL properties that can be concurrently used for biomedical applications. In particular, the emissive modes combined in a single nanoparticle co-doped with Pr3+ and Yb3+ include DCL emission (excited at 980 nm and peaked at 1320 nm), which can be used for near infrared (NIR) DCL bioimaging in the NIR-II window of biological tissue transparency (∼1000-1350 nm) and UCL emission (excited at 447 nm and peaked at 275 nm) that can be employed for germicide action (via irradiation by light in the UVC range). A possibility of the latter was demonstrated by the denaturation of double-stranded DNA (dsDNA) into single-stranded ones that was caused by the UVC UCL emission from the NCs under 447 nm irradiation; it was evidenced by the hyperchromicity observed in the irradiated dsDNA solution and also by a fluorometric analysis of DNA unwinding (FADU) assay. Concurrently, the possibility of NIR-II luminescence bioimaging through biological tissues (bovine tooth and chicken flesh) was demonstrated. The proposed concept paves a way for NIR-II imaging guided antimicrobial phototherapy using lanthanide-doped fluoride nanocrystals.

Assembling metal-organic cages as porous materials.

There is growing interest in metal-organic cages (MOCs) as porous materials owing to their processability in solution. The discrete molecular character and surface features of MOCs have a direct impact on the interactions between cages, enabling the final physical state of the materials to be tuned. In this tutorial review, we discuss how to use MOCs as core building units, highlighting the role played by surface functionalisation of MOCs in leading to porous materials in a range of states covering crystalline solids, soft matter, liquids and composites. We finish by providing an outlook on the opportunities for this work to serve as a foundation for the development of increasingly complex functional porous materials structured over various length scales.

Type 3 Porous Liquids for the Separation of Ethane and Ethene.

We assess the potential for formulating a porous liquid that could be used as a selective solvent for the separation of ethane and ethene. Ethane-ethene separation is performed on very large scales by cryogenic distillation, but this uses large amounts of energy. Solvents that are selective to ethane or ethene could potentially enable more efficient liquid-based separation processes to be developed, but to date such solvents have been elusive. Here, Type 3 porous liquids, which consist of microporous solids dispersed in size-excluded liquid phases, were tailored toward the separation of ethane and ethene. A high selectivity for ethene over ethane (25.6 at 0.8 bar) and a high capacity was achieved for zeolite AgA dispersed in an Ag-containing ionic liquid. Unusually for liquid phases, the selectivity for ethane over ethene (2.55 at 0.8 bar) could also be achieved using either the metal-organic framework (MOF) Cu(Qc)2 (Qc = quinoline-5-carboxylate) dispersed in sesame oil or ZIF-7 in sesame oil, the latter showing gated uptake. The efficiency of the Cu(Qc)2 synthesis was increased by developing a mechanochemical method. The regeneration of Cu(Qc)2 in sesame oil and ZIF-7 in sesame oil was also demonstrated, suggesting that these or similar porous liquids could potentially be applied in cyclic separation processes.

Type 3 porous liquids based on non-ionic liquid phases - a broad and tailorable platform of selective, fluid gas sorbents.

We describe a series of Type 3 porous liquids, denoted "T3PLs", based on a wide range of microporous solids including MOFs, zeolites and a porous organic polymer (PAF-1). These solids are dispersed in various non-ionic liquid phases (including silicone oils, triglyceride oils, and polyethylene glycols) which have a range of structures and properties, and that are in many cases sterically excluded from the pores of the solids. Several stable dispersions with high gas uptakes are obtained. We show how these dispersions can be tailored toward important gas separation processes (CO2/CH4, C2H4/C2H6) and applications that require biocompatibility.

Switchable Surface Hydrophobicity-Hydrophilicity of a Metal-Organic Framework.

Materials with surfaces that can be switched from high/superhydrophobicity to superhydrophilicity are useful for myriad applications. Herein, we report a metal-organic framework (MOF) assembled from ZnII ions, 1,4-benzenedicarboxylate, and a hydrophobic carborane-based linker. The MOF crystal-surface can be switched between hydrophobic and superhydrophilic through a chemical treatment to remove some of the building blocks.

Synthesis, structure, and catalytic applications for ortho- and meta-carboranyl based NBN pincer-Pd complexes.

o- and m-Carborane-based NBN pincer palladium complexes (oCB-L1)Pd, (oCB-L2)Pd, and (mCB-L1)Pd are synthesized in two steps from commercially available starting materials. The pincer complexes were prepared by the reaction of bis-[R(hydroxy)methyl]-1,2-dicarba-closo-dodecaborane (R = 2-pyridyl oCB-L1, 6-methyl-2-pyridyl oCB-L2) or bis-[2-pyridyl (hydroxy)methyl]-1,2-dicarba-meta-dodecaborane (mCB-L1) with [PdCl2(MeCN)2] under mild conditions. The X-ray structure determination of all carboranyl pincer complexes shows unambiguously B-H activation of the carborane cages. The results agree with the Pd-B bonds in all complexes exhibiting strong σ-electron donation. Theoretical calculations reveal the importance of considering the solid state intermolecular hydrogen bonding when investigating the trans influence in organometallic chemistry. A localized orbitals approach has also been applied to analyze the metal oxidation state in the carboranyl pincer complexes. Catalytic applications of (oCB-L1)Pd and (mCB-L1)Pd have shown the complexes are good catalyst precursors in Suzuki coupling in water and with very low amounts of catalyst loadings.

A racemic and enantiopure unsymmetric diiron(III) complex with a chiral o-carborane-based pyridylalcohol ligand: combined chiroptical, magnetic, and nonlinear optical properties.

The design of molecule-based systems combining magnetic, chiroptical and second-order optical nonlinear properties is still very rare. We report an unusually unsymmetric diiron(III) complex 1, in which three bulky chiral carboranylpyridinealkoxide ligands (oCBhmp(-)) bridge both metal ions and the complex shows the above-mentioned properties. The introduction of o-carborane into the 2-(hydroxymethyl)pyridine (hmpH) architecture significantly alters the coordination of the simple or aryl-substituted 2-hmpH. The unusual architecture observed in 1 seems to be triggered by the poor nucleophilicity of our alkoxide ligand (oCBhmp(-)). A very rare case of spontaneous resolution takes place on precipitation or exposure to solvent vapor for the bulk compound, as confirmed by a combination of single-crystal and powder X-ray diffraction, second-harmonic generation, and circular dichroism. The corresponding enantiopure complexes (+)1 and (-)1 have also been synthesized and fully characterized. This research provides a new building block with unique geometry and electronics to construct coordination complexes with multifunctional properties.

Enhanced photocatalytic hydrogen generation using polymorphic macroporous TaON.

Macroporous TaON (mac-TaON) is prepared using polymer sphere templating and controlled ammonolysis. In contrast to typical powder synthesis, which gives the ß polymorph, mac-TaON is a mixture of ß and γ polymorphs. mac-TaON shows twice the activity for photocatalytic hydrogen generation in comparison to mac-TaON when normalised for surface area.