Comparing the Ion-Conducting Polymers with Sulfonate and Ether Moieties as Cathode Binders for High-Power Lithium-Ion Batteries.

Two types of ion-conducting polyimides with sulfonate or ether functional groups were synthesized as ion-type or coordination-type cathode binders for lithium-ion batteries (LIBs), respectively. Although superior ion transport abilities have been reported for both types of ion-conducting polymers, their electrochemical performances are significantly different and the corresponding transport mechanisms at the electrolyte/electrode interface remain elusive. Here, we combine experimental and computational techniques to investigate the cathode interface in the presence of both functional polymer binders in comparison with the poly(vinylidene fluoride) (PVDF) binder as reference. A broad shoulder in the cyclic voltammogram accompanied by a poor rate performance of battery tests was observed for a LiFePO4 cathode with coordination-type ether-based polyimide (EPI) binder. In contrast, a LiFePO4 cathode with ion-type sulfonated polyimide (SPI) binder exhibits smaller concentration polarization, achieving satisfactory capacity at high current density. Simulations show that the ether-based binder strongly coordinates Li ions and thus slows the diffusion of Li ions. This leads to the reduction of the LIB electrochemical performance at a high C-rate. In contrast, the negative moiety of the SPI binder leads to less localization of Li ions, allowing a slightly higher Li-ion mobility. Conventional PVDF shows no affinity to Li ions, leading to less Li-ion accumulation at the electrode/electrolyte interface. Yet, the cathode surface covered with PVDF shows the lowest Li-ion diffusivity compared to those with the two types of Li-ion-conducting binders. Therefore, cathodes with SPI and PVDF binders show less polarization at the electrode interface and allow higher C-rate performance of LIBs. The combined results provide a comprehensive understanding of the mechanism of ion conduction in ion- and coordination-type Li-ion-conducting polymer binders. This gives valuable insight into the design of next-generation polymer materials for high-power LIBs.

Stable Lithium Deposition Generated from Ceramic-Cross-Linked Gel Polymer Electrolytes for Lithium Anode.

In this work, a composite gel electrolyte comprising ceramic cross-linker and poly(ethylene oxide) (PEO) matrix is shown to have superior resistance to lithium dendrite growth and be applicable to gel polymer lithium batteries. In contrast to pristine gel electrolyte, these nanocomposite gel electrolytes show good compatibility with liquid electrolytes, wider electrochemical window, and a superior rate and cycling performance. These silica cross-linkers allow the PEO to form the lithium ion pathway and reduce anion mobility. Therefore, the gel not only features lower polarization and interfacial resistance, but also suppresses electrolyte decomposition and lithium corrosion. Further, these nanocomposite gel electrolytes increase the lithium transference number to 0.5, and exhibit superior electrochemical stability up to 5.0 V. Moreover, the lithium cells feature long-term stability and a Coulombic efficiency that can reach 97% after 100 cycles. The SEM image of the lithium metal surface after the cycling test shows that the composite gel electrolyte with 20% silica cross-linker forms a uniform passivation layer on the lithium surface. Accordingly, these features allow this gel polymer electrolyte with ceramic cross-linker to function as a high-performance lithium-ionic conductor and reliable separator for lithium metal batteries.