ABSTRACT
OBJECTIVE: To investigate the impact of X-ray preset acquisition protocol settings on fluoroscopy image quality (IQ) and radiation exposure. MATERIALS & METHODS: A quality control (QC) phantom was imaged with a modern digital C-arm system, using various preset fluoroscopy protocols. IQ was assessed using human observers and in-house software for automated evaluation, based on contrast-to-noise ratios of details and their background. Patient radiation exposure was evaluated using the displayed Incident Air-Kerma and Kerma-Area Product values. RESULTS: Protocol selection affects radiation exposure by a factor of about 3. IQ evaluation showed that acquisition protocols produce images with quite different characteristics. The visual IQ evaluation method was time consuming and cumbersome. The automated method, utilized the visual IQ evaluation results for calibration of detection thresholds. However, it failed to reproduce these results for all images and details types. In some images, digital image processing created artifacts which affected the pixel value distributions around details in a way that could be handled only by the human vision. CONCLUSION: Manufacturers provide many preset protocols designated for specific clinical uses, which have large impact on IQ characteristics and radiation exposure. However, protocol settings' selection rationale is essentially a "black box" for the end user. Though QC phantoms are currently used for IQ evaluation, they are not appropriate for drawing firm conclusions concerning the expected performance of each protocol in clinical practice. Currently, there is no consensus on the optimum technical characteristics of preset protocols for specific procedures. More work is needed in this area.
Subject(s)
Image Processing, Computer-Assisted , Radiation Exposure , Fluoroscopy , Humans , Phantoms, Imaging , Radiation DosageABSTRACT
Mentoring aims to improve careers and create benefits for the participants' personal and professional lives. Mentoring can be an individual or a shared experience for a group, while the mentor's role remains the same in both models. Mentors should increase confidence, teach, inspire, and set examples, helping the mentees to mould their path, contributing to the pursuit of their personal and professional goals. This study aims to report on the experience of early-career medical physics professionals and postgraduate students participating in a global mentoring program and to assess the impact of this activity on their professional development. The objectives of this mentoring program are to develop leadership roles among young medical physicists and to provide guidance and support. An online questionnaire was administered to the mentee participants. The analysis of their responses is reported in this work and the current status of the programme was examined using a SWOT analysis. In general, the mentoring experience had a positive impact on the mentees. The mentors were found especially helpful in the decision-making situations and in other conflicts that may arise with career development. Additionally, the mentees felt that mentoring contributed to the development of leadership skills required for the job market and assist in personal development. This paper concludes that participation of young medical physicists in a mentoring group program is beneficial to their career and therefore should be encouraged.
Subject(s)
Mentoring , Mentors , Humans , Leadership , Physics , Program EvaluationABSTRACT
PURPOSE: This work aimed to evaluate the use of a dose management software (DMS) in mammography and analyse the clinical practice in terms of radiation exposure in screening and diagnostic mammography. METHODS: Mean glandular dose (MGD) from approximately 10,000 images were collected and analysed taking into account anode/filter combination, projection, compressed breast thickness (CBT) and compression force. Causes of increased MGD were investigated and actions were taken when malpractice was detected. RESULTS: MGD values for craniocaudal (CC) and mediolateral oblique (MLO) exposures for different CBT were defined. The average MGD for CBT of 60-69 mm was 1.84 mGy for CC images and 1.85 mGy for MLO images for screening examinations, while for diagnostic examinations the MGD was 1.95 mGy for CC and 2.01 mGy for MLO images. As no national diagnostic reference levels (DRLs) for mammography exist in Switzerland, typical mean glandular dose (MGD) values were defined as a first step towards their establishment for both screening and diagnostic examinations. CONCLUSIONS: The use of DMS facilitated immensely the analysis of all clinical and technical parameters, the evaluation of radiation dose received by the patients, as well as the overall evaluation of radiographers' performance. The DMS disclosed the role of the medical physicist in dose management and optimization.
Subject(s)
Mammography/methods , Radiation Dosage , Software , Aged , Female , Humans , Middle Aged , RadiometryABSTRACT
INTRODUCTION: Endoscopic Retrograde Cholangio-Pancreatography (ERCP) is an well-established endoscopic procedure for the management of biliary diseases. The use of fluoroscopy during ERCP has often raised concerns regarding potential risks from radiation exposure, particularly in complex cases. We investigated whether a new digital single-operator cholangioscopy (D-SOC) system, used adjunctively to ERCP, actually reduces patient radiation exposure. MATERIALS AND METHODS: We retrospectively analyzed a prospective database (April 2016 to October 2018) including consecutive patients who underwent successful management of difficult-to-treat biliary stones or indeterminate biliary strictures by using either conventional ERCP (ERCP cohort) or ERCP in conjunction with D-SOC (ERCP/D-SOC cohort). The overall patient radiation exposure outcomes were compared in terms of Kerma Area Product (KAP), Fluoroscopy time (T) and the total number of films (F). RESULTS: Overall, 47 patients (mean 71.8â¯years, 59.6% males) were included (ERCP cohortâ¯=â¯29, ERCP/D-SOC cohortâ¯=â¯18), referred either for difficult bile duct stones (nâ¯=â¯36) or indeterminate biliary strictures (nâ¯=â¯11). The median KAP, T and F in the ERCP/D-SOC cohort were 12.3 Gycm2, 3.7â¯min and 4 films respectively, compared with 52.1 Gycm2, 8.4â¯min, and 5 films respectively in the ERCP cohort. Statistically significant differences (Pâ¯=â¯0.0001) were found for KAP and T. CONCLUSIONS: Adjunct use of a digital cholangioscopy platform appears to significantly reduce radiation exposure in patients undergoing ERCP for the management of difficult bile stones or indeterminate biliary strictures.
Subject(s)
Bile Ducts/diagnostic imaging , Bile Ducts/radiation effects , Cholangiopancreatography, Endoscopic Retrograde/adverse effects , Gallstones/diagnostic imaging , Radiation Exposure/prevention & control , Aged , Female , Humans , Male , Retrospective StudiesABSTRACT
Advantages of Cone Beam Computed Tomography (CBCT) include high-quality 3D imaging and reduced radiation exposure with relatively low cost. In this study, patient radiation exposure in CBCT implant planning dentistry was measured in terms of Kerma Area Product (KAP). Data were obtained from 217 CBCT scans on 168 individuals using a CS9300 Carestream system. Scans were made using 80-90 kVp, 4-5 mA, 8 and 13.3 s exposure time (depending on voxel size) and a fixed field of view (FOV) of 10 × 10 cm2 (medium). Mean KAP was estimated using two voxel sizes 180 × 180 × 180 µm3 and 200 × 200 × 200 µm3 and found to be 399 and 314 mGycm2, respectively. Corresponding KAP values found in literature ranged between 210 and 2140 mGycm2. Mean E was estimated using conversion coefficient factors found in literature, according to FOV size and tube voltage value and found to range between 24 and 161 µSv.
Subject(s)
Cone-Beam Computed Tomography/methods , Dental Implantation/methods , Dental Implants/standards , Patient Care Planning/standards , Phantoms, Imaging , Thermoluminescent Dosimetry/methods , Cone-Beam Computed Tomography/instrumentation , Humans , Image Interpretation, Computer-Assisted/methods , Radiation DosageABSTRACT
INTRODUCTION: The International Atomic Energy Agency (IAEA) organized the 3rd international conference on radiation protection (RP) of patients in December 2017. This paper presents the conclusions on the interventional procedures (IP) session. MATERIAL AND METHODS: The IAEA conference was conducted as a series of plenary sessions followed by various thematic sessions. "Radiation protection of patients and staff in interventional procedures" session keynote speakers presented information on: 1) Risk management of skin injuries, 2) Occupational radiation risks and 3) RP for paediatric patients. Then, a summary of the session-related papers was presented by a rapporteur, followed by an open question-and-answer discussion. RESULTS: Sixty-seven percent (67%) of papers came from Europe. Forty-four percent (44%) were patient studies, 44% were occupational and 12% were combined studies. Occupational studies were mostly on eye lens dosimetry. The rest were on scattered radiation measurements and dose tracking. The majority of patient studies related to patient exposure with only one study on paediatric patients. Automatic patient dose reporting is considered as a first step for dose optimization. Despite efforts, paediatric IP radiation dose data are still scarce. The keynote speakers outlined recent achievements but also challenges in the field. Forecasting technology, task-specific targeted education from educators familiar with the clinical situation, more accurate estimation of lens doses and improved identification of high-risk professional groups are some of the areas they focused on. CONCLUSIONS: Manufacturers play an important role in making patients safer. Low dose technologies are still expensive and manufacturers should make these affordable in less resourced countries. Automatic patient dose reporting and real-time skin dose map are important for dose optimization. Clinical audit and better QA processes together with more studies on the impact of lens opacities in clinical practice and on paediatric patients are needed.
Subject(s)
Radiation Protection , Humans , Occupational Exposure/prevention & control , Patient Safety , Radiation Protection/instrumentation , Radiation Protection/methodsABSTRACT
This study aimed to evaluate paediatric radiation doses in a dedicated cardiology hospital, with the objective of characterising patterns in dose variation. The ultimate purpose was to define Local (Institutional) Diagnostic Reference Levels (LDRLs) for different types of paediatric cardiac interventional procedures (IC), according to patient age. From a total of 710 cases performed during three consecutive years, by operators with more than 15â¯years of experience, the age was noted in only 477 IC procedures. The median values obtained for Fluoroscopy Time (FT), Number of Frames (N) and Kerma Area Product (PKA) by age range were 5.8â¯min, 1322 and 2.0â¯Gy.cm2 forâ¯<1â¯y; 6.5â¯min, 1403 and 3.0â¯Gy.cm2 for 1 toâ¯<5â¯y; 5.9â¯min, 950 and 7.0â¯Gy.cm2 for 5 toâ¯<10â¯y; 5.7â¯min, 940 and 14.0â¯Gy.cm2 for 10 toâ¯<16â¯y, respectively. A large range of patient dose data is observed, depending greatly on procedure type and patient age. In all age groups the range of median FT, N and PKA values was 3.1-15.8â¯min, 579-1779 and 1.0-20.8â¯Gy.cm2 respectively. Consequently, the definition of LDRLs presents challenges mainly due to the multiple clinical and technical factors affecting the outcome. On the other hand the lack of paediatric IC DRLs makes the identification of good practices more difficult. A consensus is needed on IC procedures nomenclature and grouping in order to allow a common assessment and comparison of doses.
Subject(s)
Cardiology/standards , Adolescent , Child , Female , Fluoroscopy , Greece , Humans , Male , Reference StandardsABSTRACT
Dental radiology uses X-ray technology to diagnose and design treatment of various clinical problems related to the oral cavity and surrounding tissues. As technology quickly evolves, there are numerous X-ray modalities using different tools in the attempt to best image and treat efficiently these diseases, disorders or other related clinical conditions. The reported numbers of dental X-rays, the fact that these may be under-reported in many countries and because dental X-rays are performed more on younger individuals, whose teeth and dentition are still developing, calls for increased need on radiation protection. The objectives of this paper are to report on the latest technology updates and related radiation protection issues, to present future directions and define gaps. Most of existing radiation protection national and international guidelines are more than a decade old. Update is needed to account for newer technologies such as cone beam computed tomography (CBCT) and digital imaging. Diagnostic Reference Levels (DRLs), a well established method for dose optimization, are not yet defined for CBCT and have to be set for various clinical indications. As far as shielding is concerned, recent data confirm that use of lead apron, even in pregnant patients, or gonadal shielding are not recommended, due to negligible radiation dose reduction. Thyroid lead shielding should be used in case the organ is in or close to the primary beam. Specifically for CBCT, leaded glasses, thyroid collars and collimation (smaller field of view (FOV) especially for paediatric patients) minimize the dose to organs outside the FOV.
Subject(s)
Radiation Protection/methods , Radiography, Dental/methods , Humans , Radiation DosageABSTRACT
The main objective of this study was to determine the preliminary Diagnostic Reference Levels (DRLs) in terms of Kerma Area Product (KAP) and fluoroscopy time (Tf) during Endoscopic Retrograde Cholangio-Pancreatography (ERCP) procedures. Additionally, an investigation was conducted to explore the statistical relation between KAP and Tf. Data from a set of 200 randomly selected patients treated in 4 large hospitals in Greece (50 patients per hospital) were analyzed in order to obtain preliminary DRLs for KAP and Tf during therapeutic ERCP procedures. Non-parametric statistic tests were performed in order to determine a statistically significant relation between KAP and Tf. The resulting third quartiles for KAP and Tf for hospitals (A, B, C and D) were found as followed: KAPA=10.7Gycm(2), TfA=4.9min; KAPB=7.5Gycm(2), TfB=5.0min; KAPC=19.0Gycm(2), TfC=7.3min; KAPD=52.4Gycm(2), TfD=15.8min. The third quartiles, calculated for the total 200 cases sample, are: KAP=18.8Gycm(2) and Tf=8.2min. For 3 out of 4 hospitals and for the total sample, p-values of statistical indices (correlation of KAP and Tf) are less than 0.001, while for the Hospital A p-values are ranging from 0.07 to 0.08. Using curve fitting, we finally determine that the relation of Tf and KAP is deriving from a power equation (KAP=Tf(1.282)) with R(2)=0.85. The suggested Preliminary DRLs (deriving from the third quartiles of the total sample) for Greece are: KAP=19Gycm(2) and Tf=8min, while the relation between KAP and Tf is efficiently described by a power equation.
Subject(s)
Cholangiopancreatography, Endoscopic Retrograde/methods , Cholangiopancreatography, Endoscopic Retrograde/standards , Fluoroscopy/methods , Greece , Humans , Reference StandardsABSTRACT
All orthopaedic fluoroscopic procedures performed using C-arm guidance were monitored for 1 y. The type of procedure, fluoroscopy time (T), kerma-area product (KAP) values and number of radiographs (F) were recorded. The two most often performed techniques were as follows: intramedullary nailing (IMN) of intertrochanteric/peritrochanteric (IP) fractures (101 cases, 49.3 %) and antergrade IMN of femur or tibia shaft (TS) fractures (28 cases, 13.7 %). For the remaining procedures, none accounted for >5 %, categorised as 'various' (76 cases, 37 %). Large variations in T, KAP and F were observed. For IMN of IP fractures, antergrade IMN of femur and TS fractures and for various procedures, respectively, median values were T--2.1, 2.2 and 0.6 min, KAP--6.3, 6.3 and 0.6 Gy cm(-2) and F--21, 2.2 and 6.7. The patient doses during fluoroscopically guided procedures are relatively low compared with other interventional procedures.
Subject(s)
Fluoroscopy/standards , Orthopedics/standards , Radiation Dosage , Radiation Protection/methods , Aged , Aged, 80 and over , Femur/diagnostic imaging , Fracture Fixation, Intramedullary , Humans , Middle Aged , Orthopedic Procedures , Radiation Monitoring , Radiometry , Reproducibility of Results , Tibia/diagnostic imaging , X-RaysABSTRACT
To investigate whether the X-ray unit type used for interventional endoscopic retrograde cholangiopancreatography (ERCP) procedures may affect patient radiation doses. A total of 471 ERCP procedures performed in 4 hospitals with 4 types of X-ray units were studied. Kerma-area product (KAP), fluoroscopy time (T) and total number of radiographs acquired (F) were recorded. KAP, T and F values exhibited a great variation, ranging from 0.1 to 130.2 Gy cm2 (mean 16 Gy cm2), 0.13 to 33.7 min (mean 5.4 min) and 0 to 26 radiographs (mean 3.5), respectively. The respective mean values for the four types of X-ray units that were investigated were as follows: KAP: 17.4, 12.5, 5.6 and 36.3 Gy cm2, T: 4.7, 5.2, 3.8 and 11.5 min and F: 1.7, 7.4, 1.9 and 4.6 radiographs. The type of the X-ray unit seems to significantly affect patient radiation dose, with the C-arm delivering the lowest and the angiography unit the highest patient doses.
Subject(s)
Cholangiopancreatography, Endoscopic Retrograde/methods , Occupational Exposure/analysis , Radiation Dosage , Radiation Monitoring/methods , Radiation Protection/methods , Radiography, Interventional/methods , Calibration , Fluoroscopy/methods , Humans , Radiography , Retrospective Studies , X-RaysABSTRACT
OBJECTIVE: To investigate skin dose in Computed Tomography (CT) and its dependence on scanning geometry. MATERIALS AND METHODS: Measurements of entrance surface air kerma (ESAK) in free air and entrance skin dose (ESD) on an anthropomorphic phantom were performed in a 64-slice CT scanner, using two different instruments: the Dose Profiler (DP) and the QED skin diode (QEDSD). Using DP and QEDSD, the ESAK rate profiles at the isocenter and at different distances from it, were measured using axial scans. Using DP and helical scans the ESAK rate profile in the Z-axis was acquired. The same profile was acquired with the QEDSD also, using many axial scans and manual table translation. ESD measurements were performed with the DP and QEDSD, in axial and helical scan mode. RESULTS: ESAK measurements with DP and QEDSD were in good agreement, for both point dose and profile measurements. The agreement was also good for ESD measurements but not for helical scans, due to variable X-ray beam overlapping and different tube angular positions at each scan start. It was observed that the ESD values at different Y-axis offsets were comparable to the respective ESAK values recorded at the same Y-axis offset distances without the phantom. CONCLUSIONS: Both DP and QEDSD were proven suitable for performing point ESD measurements. However, calculating the skin dose distribution in CT examinations is a very challenging task. A practical approach would be for CT scanners to provide a conservative estimate of the peak skin dose using the isocenter ESAK value.
Subject(s)
Radiometry/methods , Skin/radiation effects , Tomography, X-Ray Computed , Air , Humans , Phantoms, Imaging , Radiation Dosage , Radiometry/instrumentation , Surface PropertiesABSTRACT
The core activity of the medical physics expert (MPE) is to ensure optimal use of ionising radiation in healthcare. It is essential that these healthcare professionals are trained to the highest level, defined as European Qualifications Framework for Lifelong Learning (EQF) level 8 by the European Commission's Radiation Protection Report 174 'Guidelines on the MPE'. The main objective of the EUTEMPE-RX project is to provide a model training scheme that allows the medical physicist in diagnostic and interventional radiology (D&IR) to reach this high level. A European network of partners was brought together in this FP7 EC project to ensure sufficient expertise in all aspects of the subject and to create a harmonised course programme. Targeted participants are medical physicists in D&IR in hospitals, engineers and scientists in medical device industries and officers working in regulatory authorities. Twelve course modules will be developed at EQF level 8, with radiation safety and diagnostic effectiveness being prevalent subjects. The modules will combine online with face-to-face teaching using a blended learning approach.
Subject(s)
Health Physics/education , Nuclear Medicine/education , Radiation Protection/standards , Radiology/education , Curriculum , Education, Continuing , Europe , Health Personnel , Humans , Internet , Motivation , Program Development , Quality Control , Radiation Protection/methods , Radiation, Ionizing , Reproducibility of ResultsABSTRACT
PURPOSE: To estimate the mean glandular dose of contrast enhanced digital mammography, using the EGSnrc Monte Carlo code and female adult voxel phantom. METHODS: Automatic exposure control of full field digital mammography system was used for the selection of the X-ray spectrum and the exposure settings for dual energy imaging. Measurements of the air-kerma and of the half value layers were performed and a Monte Carlo simulation of the digital mammography system was used to compute the mean glandular dose, for breast phantoms of various thicknesses, glandularities and for different X-ray spectra (low and high energy). RESULTS: For breast phantoms of 2.0-8.0 cm thick and 0.1-100% glandular fraction, CC view acquisition, from AEC settings, can result in a mean glandular dose of 0.450 ± 0.022 mGy -2.575 ± 0.033 mGy for low energy images and 0.061 ± 0.021 mGy - 0.232 ± 0.033 mGy for high energy images. In MLO view acquisition mean glandular dose values ranged between 0.488 ± 0.007 mGy - 2.080 ± 0.021 mGy for low energy images and 0.065 ± 0.012 mGy - 0.215 ± 0.010 mGy for high energy images. CONCLUSION: The low kV part of contrast enhanced digital mammography is the main contributor to total mean glandular breast dose. The results of this study can be used to provide an estimated mean glandular dose for individual cases.
Subject(s)
Contrast Media , Mammography/instrumentation , Monte Carlo Method , Phantoms, Imaging , Radiation Dosage , Radiographic Image Enhancement/instrumentation , Adult , Female , Humans , RadiometryABSTRACT
Mammography is a standard procedure that facilitates breast cancer detection. Initial results of contrast-enhanced digital mammography (CEDM) are promising. The purpose of this study is to assess the CEDM radiation dose using a Monte Carlo code. EGSnrc MC code was used to simulate the interaction of photons with matter and estimate the glandular dose (Dg). A voxel female human phantom with a 2-8-cm breast thickness range and a breast glandular composition of 50 % was applied. Dg values ranged between 0.96 and 1.45 mGy (low and high energy). Dg values for a breast thickness of 5.0 cm and a glandular fraction of 50 % for craniocaudal and mediolateral oblique view were 1.12 (low energy image contribution is 0.98 mGy) and 1.07 (low energy image contribution is 0.95 mGy), respectively. The low kV part of CEDM is the main contributor to total glandular breast dose.
Subject(s)
Absorptiometry, Photon/methods , Contrast Media , Mammography/methods , Phantoms, Imaging , Radiographic Image Enhancement/methods , Adult , Air , Breast/pathology , Computer Simulation , Female , Humans , Monte Carlo Method , Neovascularization, Pathologic , Radiation Dosage , RadiometryABSTRACT
OBJECTIVE: To calculate the cumulative effective and skin doses in patients that underwent repeated CT guided radiofrequency ablations (RFA). MATERIALS AND METHODS: From all patients that had undergone RFA during a five years period those which had three or more RFAs were selected. Using the CT images DICOM data, the dose length product (DLP), effective dose (E), skin dose profiles as well as the peak skin dose (PSD) were calculated, using appropriate methods and software developed for this purpose. For each patient, cumulative DLP and E were also calculated from the sum of the respective figures of each individual procedure. To calculate PSD, the skin dose profiles of each procedure were overlaid on the same Z-axis scale using anatomical landmarks for reference and the skin doses to each point were summed up. RESULTS: Five patients were studied; four had undergone 3 RFAs and one 10 RFAs. Cumulative DLP, E and PSD ranges were 5.6-22.3 Gy cm, 0.08-0.36 Sv and 0.8-3.4 Gy, respectively. Median E and PSD values per RFA were 35 mSv and 0.4 Gy, respectively. For comparison purposes it must be noted that in this CT department a routine abdomen-pelvis scan results to an E of about 10 mSv. CONCLUSIONS: Patients that undergo repeated RFAs are exposed to considerably high radiation exposure levels. When these patients are in the final stage of malignant diseases, stochastic effects may not be of major concern. However, optimization of the exposure factors and monitoring of these patients to avoid skin injuries are required.
Subject(s)
Ablation Techniques/methods , Radiation Dosage , Radiofrequency Therapy , Surgery, Computer-Assisted/methods , Tomography, X-Ray Computed , Aged , Humans , Middle Aged , Skin/diagnostic imaging , Skin/radiation effectsABSTRACT
This article expresses the current view of the European Society of Gastrointestinal Endoscopy (ESGE) about radiation protection for endoscopic procedures, in particular endoscopic retrograde cholangiopancreatography (ERCP). Particular cases, including pregnant women and pediatric patients, are also discussed. This Guideline was developed by a group of endoscopists and medical physicists to ensure that all aspects of radiation protection are adequately dealt with. A two-page executive summary of evidence statements and recommendations is provided. The target readership for this Guideline mostly includes endoscopists, anesthesiologists, and endoscopy assistants who may be exposed to X-rays during endoscopic procedures.
Subject(s)
Cholangiopancreatography, Endoscopic Retrograde/instrumentation , Cholangiopancreatography, Endoscopic Retrograde/standards , Occupational Exposure/analysis , Patient Safety/standards , Radiation Monitoring/standards , Radiation Protection/standards , Adult , Child , Cholangiopancreatography, Magnetic Resonance , Endosonography , Female , Filtration , Fluoroscopy/methods , Fluoroscopy/standards , Health Personnel , Humans , Patient Education as Topic , Pregnancy , Pregnancy Complications/diagnosis , Quality Assurance, Health Care/legislation & jurisprudence , Radiation Dosage , Radiation Monitoring/methods , SwitzerlandABSTRACT
Coronary angiography (CA) and percutaneous transluminal coronary angioplasty (PTCA) radiation doses were investigated in a recently founded Interventional Cardiology (IC) department. The study includes 336 procedures (177 CAs and 159 PTCAs) carried out with a Philips digital flat detector monoplane system. Patient dose was measured in terms of kerma-area product (KAP) and cumulative dose. Using appropriate conversion factors, peak skin dose (PSD) and effective dose (E) were estimated. Median values of KAP (Gy cm(2)), PSD (mGy) and E (mSv) were: 34 478 and 6.1, respectively for CA and 80 885 and 14.4 for PTCA, within European and international reference levels. Only 1.5 % of patients received radiation dose over the 2 Gy threshold (PTCA procedures) for deterministic effects and none reported any skin effect. Radiation doses were within international standards and comparable with other radiological examinations. The percentage of the high-risk patients for radiation skin effects is extremely low.
Subject(s)
Angioplasty, Balloon, Coronary , Coronary Angiography , Radiography, Interventional , Skin/diagnostic imaging , Fluoroscopy , Humans , Pilot Projects , Radiation Dosage , Reference StandardsABSTRACT
The purpose was to evaluate patient radiation doses and compare with other interventional procedures. One hundred and twenty-eight procedures were carried out with a recently installed mobile undercouch C-arm machine with a 23-cm diameter image intensifier. The radiation dose is provided by the X-ray machine, in terms of cumulative dose (CD). Kerma-Area product (KAP) was then estimated from CD and the X-ray field size. Other patient parameters recorded were patient weight, age, kilovolt, milliampere and fluoroscopy time (T). Median (range) CD, KAP and T were 15.2 mGy (3.2-110 mGy), 6.3 Gy cm(2) (1.3-45.7 Gy cm(2)) and 5.2 (1.5-27.4 min) min, respectively. Median E was 1.1 mSv (conversion factor: 0.18 mSv per Gy cm(2)), which corresponds to approximately one lumbar spine X-ray radiography. The effective dose is much lower than a coronary angiography (8 mSv) or an electrophysiology study (6 mSv). Radiation dose is low compared with other interventional cardiology procedures.
Subject(s)
Cardiovascular Diseases/therapy , Pacemaker, Artificial , Radiography, Interventional , Humans , Lumbar Vertebrae/diagnostic imaging , Radiation Dosage , Spine/diagnostic imaging , X-RaysABSTRACT
The aim of the study was to calculate radiation doses for patients and staff during interventional Endoscopic retrograde cholangiopancreatography (ERCP) procedures. Patient age (A), kerma-area product (KAP), fluoroscopy time (T) and total number of films (F) were collected for 157 interventional ERCP procedures. One endoscopist (>10 y of experience) monitored using a thermoluminescent dosemeter worn over the lead apron performed the ERCPs. Median (range) KAP was 3.1 Gy cm(-2) (0.1-106.7 Gy cm(-2)). Median (range) A, T and F were 72 y, 2.6 (0.2-26.0) min and 2 (1-4) images, respectively. No correlation was observed between KAP and A, T or F. Monthly endoscopist dose was negligible due to the use of lead apron, collar and two lead-articulated ceiling mounted shields. The endoscopist dose is minimal when using appropriate protective measures. Patient doses showed large variation that has to be further investigated.