ABSTRACT
Linear polarization rotators have been widely used in optical systems. Commonly used polarization rotators are still beset by strong dispersion and thus restricted spectral bandwidth of operation. This leads to the development of achromatic or broadband alternatives, but most of them incorporate multiple waveplates for retardation compensation, which comes at the cost of increased complexity and reduced flexibility in operation and system design. Here, we demonstrate a single-element achromatic polarization rotator based on a thin film of dual-frequency chiral liquid crystal. The angle of polarization rotation is electrically tunable from 0° to 180° with low dispersion (±3°) in the entire visible spectrum, and a high degree of linear polarization (>95%) at the output.
ABSTRACT
In this study, a twisted nematic mode polymer-stabilized liquid crystal (TN mode PSLC) integrated with a crossed polarizer was used to create a transparent waveguide display. When a voltage was applied, the PSLC scattered the waveguide light with a high polarization selectivity such that no substantial loss of the outgoing light intensity was observed after integrating the polarizer. However, with a crossed polarizer, in the ON state, the background light was not only scattered but also absorbed by the analyzer. Using this device configuration, with a 12 µm cell gap and 7% monomer concentration, we successfully realized a normally transparent waveguide display. The contrast ratio of the waveguide outgoing light was 26 and that of the undesired background reached 90. This device can display images due to waveguide edge-lit light scattering and simultaneously block the background information to improve the image quality.
ABSTRACT
Dimming and scattering control are two of the major features of smart windows, which provide adjustable sunlight intensity and protect the privacy of people in a building. A hybrid photo- and electrical-controllable smart window that exploits salt and photochromic dichroic dye-doped cholesteric liquid crystal was developed. The photochromic dichroic dye causes a change in transmittance from high to low upon exposure to sunlight. When the light source is removed, the smart window returns from colored to colorless. The salt-doped cholesteric liquid crystal can be bi-stably switched from transparent into the scattering state by a low-frequency voltage pulse and switched back to its transparent state by a high-frequency voltage pulse. In its operating mode, an LC smart window can be passively dimmed by sunlight and the haze can be actively controlled by applying an electrical field to it; it therefore exhibits four optical states-transparent, scattering, dark clear, and dark opaque. Each state is stable in the absence of an applied voltage. This smart window can automatically dim when the sunlight gets stronger, and according to user needs, actively adjust the haze to achieve privacy protection.
ABSTRACT
An electrically activated bistable light shutter that exploits polymer-stabilized cholesteric liquid crystal film was developed. Under double-sided three-terminal electrode driving, the device can be bistable and switched between focal conic and homeotropic textures with a uniform in-plane and vertical electrical field. The transparent state with a transmittance of 80% and the opaque/scattering state with a transmittance of 13% can be realized without any optical compensation film, and each can be simply switched to the other by applying a pulse voltage. Also, gray-scale selection can be performed by varying the applied voltage. The designed energy-saving bistable light shutter can be utilized to preserve privacy and control illumination and the flow of energy.
