ABSTRACT
Unlike electromagnetic waves, acoustic vibrations waves can be used to transfer power directly through metal structures without being shielded. In this article, a novel design of a self-detachable acoustic wireless power transfer system that can be used to transfer power through the thickness of a steel plate is presented, which does not require the use of any couplant. Electro-permanent-magnets (EPMs) were used to provide magnetic clamping force along the perimeter of the receiver transducer disk to enhance coupling to the steel plate, while the transmitter transducer was bonded to the other side of the plate. The EPM clamping force can be switched ON/ OFF electronically with low power consumption. Unlike past work reliant on additional bonding materials or liquid/gel couplant, this approach enables the receiver to be attached and detached at will, opening up the possibility of a simple charging pad for unmanned aerial vehicles (UAVs) or other consumer devices for harsh environment applications. Power transfer efficiency up to 63% was achieved, and the effect of varying steel plate thickness and clamping force was also investigated. A finite element model was also constructed to understand the vibration mode shape.
Subject(s)
Acoustics , Transducers , Steel , VibrationABSTRACT
Ultrasonic guided plate waves (Lamb waves) can be used to transfer power along the length of metal plates, achieving longer distance wireless power transfer (WPT), while not being impeded by electromagnetic shielding from the metal plate. In this article, a fundamental study on the performance of Lamb wave WPT is presented, including modeling, simulations, and experimental verification. By using Macro-Fiber Composite (MFC), d33 -mode, piezoelectric transducers bonded to a [Formula: see text] mm aluminum plate using an epoxy, power transfer of 0.47 W with 56% overall power transfer efficiency was achieved at a 204-mm distance. The measured frequency response of the power transfer efficiency matches well with the simulated results, and the effects of complex load impedance matching and transducer sizing were investigated. It is shown that the location where the efficiency is maximized roughly corresponds to the zero-order symmetrical mode (S0) standing wave patterns due to reflections from the plate edges. For practical implementation, the effect of using different methods to temporarily or permanently bond the MFC transducers to the metal plate was also investigated, as well as the effect of electrically grounding the metal plate.
ABSTRACT
Wireless power transfer (WPT) through acoustic waves can achieve higher efficiencies than inductive coupling when the distance is above several times the transducer size. This paper demonstrates the use of ultrasonic phased arrays to focus power to receivers at arbitrary locations to increase the power transfer efficiency. Using a phased array consisting of 37 elements at a distance nearly 5 times the receiver transducer diameter, a factor of 2.6 increase in efficiency was achieved when compared to a case equivalent to a single large transducer with the same peak efficiency distance. The array has a total diameter of 7 cm, and transmits through air at 40 kHz to a 1.1-cm diameter receiver, achieving a peak overall efficiency of 4% at a distance of 5 cm. By adjusting the focal distance, the efficiency can also be maintained relatively constant at distances up to 9 cm. Numerical models were developed and shown to closely match the experimental energy transfer behavior; modeling results indicate that the efficiency can be further doubled by increasing the number of elements. For comparison, an inductive WPT system was also built with the diameters of the transmitting and receiving coils equivalent to the dimensions of the transmitting ultrasonic phased array and receiver transducer, and the acoustic WPT system achieved higher efficiencies than the inductive WPT system when the transmit-to-receive distance is above 5 cm. In addition, beam angle steering was demonstrated by using a simplified seven-element 1-D array, achieving power transfer less dependent on receiver placement.
