Molecular dynamics simulations for interfacial structure and affinity between carboxylic acid-modified Al2O3 and polymer melts.

Controlling the dispersion state of nanoparticles in a polymer matrix is necessary to produce polymer nanocomposites. The surface modification of nanoparticles is used to enable their dispersion in polymers. Moreover, molecular dynamics (MD) simulations are useful for revealing the interfacial properties between nanoparticles and polymers to aid in the design of materials. In this study, the effect of surface coverage, modifier length, and polymer species on the interfacial structure and affinity between surface-modified Al2O3 and polymer melts were investigated using all-atom MD simulations. Hexanoic, decanoic, and tetradecanoic acids were used as surface modifiers, and polypropylene (PP), polystyrene (PS), and poly (methyl methacrylate) (PMMA) were used as polymers. The work of adhesion Wadh and the work of immersion Wimm were selected as quantitative measures of affinity. Wadh was calculated using the phantom-wall approach, and Wimm was calculated by simply subtracting the surface tension of polymers γL from Wadh. The results showed that Wadh and Wimm were improved by surface modification with low coverage, owing to a good penetration of the polymer. The effect of modifier length on Wadh and Wimm was small. Whereas Wadh increased in the following order: PP < PS < PMMA, Wimm increased as follows: PMMA < PS < PP. Finally, the trend of Wadh and Wimm was organized using the Flory-Huggins interaction parameter χ between the modifier and the polymer. This study demonstrates that the interfacial affinity can be improved by tuning the surface coverage and modifier species depending on the polymer matrix.

Control of the temperature responsiveness of poly(N-isopropylacrylamide-co-2-hydroxyethyl methacrylate) copolymer using ultrasonic irradiation.

Poly(N-isopropylacrylamide-co-2-hydroxyethyl methacrylate) (poly(NIPAM-co-HEMA)) is a temperature-responsive copolymer that is expected to be applicable as an advanced functional polymeric material in various fields. In this study, a novel method was developed to control the responsive temperature of poly(NIPAM-co-HEMA) using an ultrasonic polymerization technique. Initially, the behavior of the reaction was investigated using NIPAM and HEMA monomers under ultrasonic irradiation. A high ultrasonic power was found to produce a high reaction rate and low number average molecular weight of the copolymer. The polydispersity of the synthesized copolymer was approximately 1.5 for all ultrasonic powers examined. In the early stage of the reaction, the molar fraction of NIPAM in the copolymer was lower than the initial molar fraction of the monomers. It was concluded that ultrasonic irradiation affected the initiation reaction and polymer degradation, but did not affect the propagation reaction. Furthermore, the effect of the ultrasonic irradiation conditions on the temperature responsiveness of the copolymer was investigated. The lower critical solution temperature (LCST) of the copolymer was found to increase with increasing ultrasonic irradiation time. In addition, in the early stages of the reaction, the measured values of the LCST were higher than the estimated values using copolymer composition. This can be attributed to some parts of the copolymer chain possessing a higher NIPAM fraction than the overall fraction due to different reactivities of the monomers and terminated radicals. This hypothesis was indirectly verified by the synthesis of a block copolymer from the PNIPAM homopolymer and HEMA monomer.

Evaluation of the work of adhesion at the interface between a surface-modified metal oxide and an organic solvent using molecular dynamics simulations.

Advancing the practical applications of surface-modified nanoparticles requires that their dispersion in solvents can be controlled. The degree of dispersion depends on the affinity between surface-modified nanoparticles and solvents, which can be quantified using the work of adhesion at the interface. Herein, the affinity between a surface-modified inorganic solid and an organic solvent was evaluated by calculating the work of adhesion at the interface. The phantom-wall method, which is a thermodynamic route for evaluating the work of adhesion at an interface using molecular dynamics simulations, was applied to the decanoic acid-modified Al2O3/hexane interface. Molecular dynamics simulations were performed for flat interface systems to focus on the interactions between substances that affect the affinity on the surface. As a result, the surface coverage of decanoic acid was found to affect the work of adhesion, with a maximum value of 45.66 ± 0.75 mJ/m2 at a surface coverage of 75%. An analysis of the mass density profiles of Al2O3, decanoic acid, and hexane in the vicinity of the interface showed that the increase in the work of adhesion with the surface coverage was due to the penetration of hexane molecules into the decanoic acid layer on the Al2O3 surface. At a surface coverage of 75%, some hexane molecules were trapped in the layer of oriented decanoic acid molecules. These results suggested that the interfacial affinity can be enhanced by controlling the surface modification so that the solvent can penetrate the layer of the modifier.

Synthesis of poly(N-isopropylacrylamide-co-2-hydroxyethyl methacrylate) with low polydispersity using ultrasonic irradiation.

Poly(N-isopropylacrylamide-co-2-hydroxyethyl methacrylate) having low polydispersity was synthesized in mixed solvent of ethanol and water using ultrasonic irradiation without any chemical polymerization initiator. The effects of the volume fraction of ethanol in the solvent, the molar ratio of two monomers, the monomer concentration and the ultrasonic power intensity on the time courses of the conversion to the polymer, the number average molecular weight, and the polydispersity of synthesized polymer were investigated in order to determine the optimal conditions to synthesize the copolymers with a narrow molecular weight distribution (i.e. low polydispersity). The optimum volume fraction of ethanol in the solvent was 60 vol% to synthesize the copolymers with a low polydispersity. A higher ultrasonic power intensity resulted in a faster polymerization rate and a lower number average molecular weight. The polydispersity was less than 1.5 for all ultrasonic power intensities up to 450 W/dm3 applied in this work. A higher monomer concentration gave a faster polymerization rate and a higher number average molecular weight. The polydispersity was less than 1.5 when the monomer concentration was lower than 0.4 mol/dm3. A higher molar ratio of N-isopropylacrylamide resulted in a higher polymerization rate and a lower number average molecular weight. The copolymers with polydispersity less than 1.5 can be obtained regardless of the molar ratio of N-isopropylacrylamide. The copolymers synthesized by the ultrasonic polymerization method had a high temperature responsibility.

Thermal dewetting behavior of polystyrene composite thin films with organic-modified inorganic nanoparticles.

The thermal dewetting of polystyrene composite thin films with oleic acid-modified CeO2 nanoparticles prepared by the supercritical hydrothermal synthesis method was investigated, varying the nanoparticle concentration (0-30 wt %), film thickness (approximately 50 and 100 nm), and surface energy of silanized silicon substrates on which the composite films were coated. The dewetting behavior of the composite thin films during thermal annealing was observed by an optical microscope. The presence of nanoparticles in the films affected the morphology of dewetting holes, and moreover suppressed the dewetting itself when the concentration was relatively high. It was revealed that there was a critical value of the surface energy of the substrate at which the dewetting occurred. In addition, the spatial distributions of nanoparticles in the composite thin films before thermal annealing were investigated using AFM and TEM. As a result, we found that most of nanoparticles segregated to the surface of the film, and that such distributions of nanoparticles contribute to the stabilization of the films, by calculating the interfacial potential of the films with nanoparticles.

Aggregation behavior of latex particles in shear flow confined between two parallel plates.

In this study, the aggregation and breakup behaviors of latex particles in shear flow confined between two parallel plates were investigated using an in situ observation apparatus with a laser scanning confocal microscope. To investigate the effects of shear rate and the gap width between two parallel plates on the size and structure of the aggregates in the steady state, the distributions of the projected cross-sectional area and perimeter-based fractal dimension of the aggregates were measured. As a result, the average size of the aggregates decreases as shear rate increases and the gap width decreases due to the hydrodynamic effect acting on the aggregates. The size distributions of the aggregates become narrow as the gap width decreases. In addition, the fractal dimension, that is, the structure of the aggregates, was almost independent of shear rate and the gap width and approximately 1.2, which suggests that the aggregates are relatively compact.

Electrohydrodynamic effect on phase separation morphology in polymer blend films.

We have investigated the effect of electrohydrodynamic (EHD) convection on the domain structure in a polystyrene (PS)/polyvinyl acetate (PVA) blend film to demonstrate the feasibility of using the EHD effect as a means of mixing and morphology control in a polymer blend film prepared by solvent evaporation. Here, polymers-toluene solutions were spread on a glass substrate with patterned electrodes to apply a dc electric field, and well-defined structures of EHD convection were formed in the polymer solutions. As a result, regular patterns were formed in the PS/PVA polymer blend film in which PVA-rich domains were confined within each unit of patterned electrodes, i.e., between positive and negative electrodes, at an appropriate electric voltage. In addition, it was demonstrated that such novel morphology is not due to the wetting/dewetting effect of polymer components to the Pt electrodes deposited on the glass substrate, by experiments with a SiO2-covered substrate.