Simultaneous determination of delta(15)N and delta(18)O of N2O and delta(13)C of CH4 in nanomolar quantities from a single water sample.

We have developed a rapid, sensitive, and automated analytical system to simultaneously determine the concentrations and stable isotopic compositions (delta(15)N, delta(18)O, and delta(13)C) of nanomolar quantities of nitrous oxide (N(2)O) and methane (CH(4)) in water, by combining continuous-flow isotope-ratio mass spectrometry and a helium-sparging system to extract and purify the dissolved gases. Our system, which is composed of cold traps and a capillary gas chromatograph that use ultra-pure helium as the carrier gas, achieves complete extraction of N(2)O and CH(4) in a water sample and separation among N(2)O, CH(4), and the other component gases. The flow path following exit from the gas chromatograph was periodically changed to pass the gases through the combustion furnace to convert CH(4) and the other hydrocarbons into CO(2), or to bypass the combustion furnace for the direct introduction of eluted N(2)O into the mass spectrometer, for determining the stable isotopic compositions through monitoring the ions of m/z 44, 45, and 46 of CO(2) (+) and N(2)O(+). The analytical system can be operated automatically with sequential software programmed on a personal computer. Analytical precisions better than 0.2 per thousand and 0.3 per thousand and better than 1.4 per thousand and 2.6 per thousand were obtained for the delta(15)N and delta(18)O of N(2)O, respectively, when more than 6.7 nmol and 0.2 nmol of N(2)O, respectively, were injected. Simultaneously, analytical precisions better than 0.07 per thousand and 2.1 per thousand were obtained for the delta(13)C of CH(4) when more than 5.5 nmol and 0.02 nmol of CH(4), respectively, were injected. In this manner, we can simultaneously determine stable isotopic compositions of a 120 mL water sample with concentrations as low as 1.7 nmol/kg for N(2)O and 0.2 nmol/kg for CH(4).

Stable carbon and oxygen isotopic analysis of carbon monoxide in natural waters.

Techniques have been developed to allow on-line simultaneous analysis of concentration and stable isotopic compositions ((13)C and (18)O) of dissolved carbon monoxide (CO) in natural water, using continuous-flow isotope ratio mass spectrometry (CF-IRMS). The analytical system consisted sequentially of a He-sparging bottle of water, a gas dryer, CO(2)-trapping stage using both Ascarite trap and silica-gel packed gas chromatography (GC), on-line oxidation to CO(2) using the Schütze reagent, cryofocusing, GC purification using a capillary column and measurement by CF-IRMS. Each sample analysis takes about 40 minutes. The detection limit with delta(13)C standard deviation of 0.5 per thousand is 300 pmol and that with delta(18)O deviation of 1.0 per thousand is 750 pmol. Analytical blanks associated with these methods are 21+/-9 pmol. The procedures are evaluated through analyses of temporally varying concentration and isotopic compositions of CO in an artificial lake on the university campus. The delta(13)C and delta(18)O values of CO showed wide variation in accordance with diurnal variation of CO concentration, probably due to significant isotopic effects during photochemical production and microbial oxidation of CO in the aquatic environment. The delta(13)C and delta(18)O values of CO should be a useful tool in studies of the mechanism and pathways of CO production and consumption in natural waters.

Precursory chemical changes in ground water: kobe earthquake, Japan.

Chloride (Cl(-)) and sulfate (SO(4)(2-)) ion concentrations of ground water issuing from two wells located near the epicenter of the Kobe earthquake in Japan fluctuated before the disastrous magnitude 7.2 event on 17 January 1995. The samples measured were pumped ground water packed in bottles and distributed in the domestic market as drinking water from 1993 to April 1995. Analytical results demonstrate that Cl(-)and SO(4)(2-) concentrations increased steadily from August 1994 to just before the earthquake. Water sampled after the earthquake showed much higher Cl(-) and SO(4)(2-) concentrations. The precursory changes in chemical composition may reflect the preparation stage of a large earthquake.