ABSTRACT
Falls and mobility deficits are common in people with multiple sclerosis (PwMS) across all levels of clinical disability. However, functional mobility observed in supervised settings may not reflect daily life which may impact assessments of fall risk and impairment in the clinic. To investigate this further, we compared the utility of sensor-based performance metrics from sit-stand transitions during daily life and a structured task to inform fall risk and impairment in PwMS. Thirty-seven PwMS instrumented with wearable sensors (thigh and chest) completed supervised 30-second chair stand tests (30CST) and underwent two days of instrumented daily life monitoring. Performance metrics were computed for sit-stand transitions during daily life and 30CSTs. EDSS sub scores and fall history were used to dichotomize participants into groups: pyramidal/no pyramidal impairment, sensory/no sensory impairment and high/low fall risk. The ability of performance metrics to discriminate between groups was assessed using the area under the curve (AUC). The feature that best discriminated between high and low fall risk was a chest acceleration measurement from the supervised instrumented 30CST (AUC = 0.89). Only chest features indicated sensory impairment, however the task was different between supervised and daily life. The metric that best discriminated pyramidal impairment was a chest-derived feature (AUC = 0.89) from supervised 30CSTs. The highest AUC from daily life was observed in faller classification with the average sit-stand time (0.81). While characterizing sit-stand performance during daily life may yield insights into fall risk and may be performed without a clinic visit, there remains value to conducting supervised functional assessments to provide the best classification performance between the investigated impairments in this sample.
Subject(s)
Multiple Sclerosis , Wearable Electronic Devices , Area Under Curve , Biomarkers , Humans , Multiple Sclerosis/diagnosis , Postural BalanceABSTRACT
BACKGROUND: One in two people with multiple sclerosis (PwMS) will fall in a three-month period. Predicting which patients will fall remains a challenge for clinicians. Standardized functional assessments provide insight into balance deficits and fall risk but their use has been limited to supervised visits. RESEARCH QUESTION: The study aim was to characterize unsupervised 30-second chair stand test (30CST) performance using accelerometer-derived metrics and assess its ability to classify fall status in PwMS compared to supervised 30CST. METHODS: Thirty-seven PwMS (21 fallers) performed instrumented supervised and unsupervised 30CSTs with a single wearable sensor on the thigh. In unsupervised conditions, participants performed bi-hourly 30CSTs and rated their balance confidence and fatigue over 48-hours. ROC analysis was used to classify fall status for 30CST performance. RESULTS: Non-fallers (p = 0.02) but not fallers (p = 0.23) differed in their average unsupervised 30CST performance (repetitions) compared to their supervised performance. The unsupervised maximum number of 30CST repetitions performed optimized ROC classification AUC (0.79), accuracy (78.4%) and specificity (90.0%) for fall status with an optimal cutoff of 17 repetitions. SIGNIFICANCE: Brief durations of instrumented unsupervised monitoring as an adjunct to routine clinical assessments could improve the ability for predicting fall risk and fluctuations in functional mobility in PwMS.
Subject(s)
Multiple Sclerosis , Wearable Electronic Devices , Fatigue , Humans , Multiple Sclerosis/diagnosis , Postural BalanceABSTRACT
Falls are frequent and associated with morbidity in persons with multiple sclerosis (PwMS). Symptoms of MS fluctuate, and standard biannual clinical visits cannot capture these fluctuations. Remote monitoring techniques that leverage wearable sensors have recently emerged as an approach sensitive to disease variability. Previous research has shown that fall risk can be identified from walking data collected by wearable sensors in controlled laboratory conditions however this data may not be generalizable to variable home environments. To investigate fall risk and daily activity performance from remote data, we introduce a new open-source dataset featuring data collected from 38 PwMS, 21 of whom are identified as fallers and 17 as non-fallers based on their six-month fall history. This dataset contains inertial-measurement-unit data from eleven body locations collected in the laboratory, patient-reported surveys and neurological assessments, and two days of free-living sensor data from the chest and right thigh. Six-month (n = 28) and one-year repeat assessment (n = 15) data are also available for some patients. To demonstrate the utility of these data, we explore the use of free-living walking bouts for characterizing fall risk in PwMS, compare these data to those collected in controlled environments, and examine the impact of bout duration on gait parameters and fall risk estimates. Both gait parameters and fall risk classification performance were found to change with bout duration. Deep learning models outperformed feature-based models using home data; the best performance was observed with all bouts for deep-learning and short bouts for feature-based models when evaluating performance on individual bouts. Overall, short duration free-living walking bouts were found to be the least similar to laboratory walking, longer duration free-living walking bouts provided more significant differences between fallers and non-fallers, and an aggregation of all free-living walking bouts yields the best performance in fall risk classification.
ABSTRACT
Falls are a significant problem for persons with multiple sclerosis (PwMS). Yet fall prevention interventions are not often prescribed until after a fall has been reported to a healthcare provider. While still nascent, objective fall risk assessments could help in prescribing preventative interventions. To this end, retrospective fall status classification commonly serves as an intermediate step in developing prospective fall risk assessments. Previous research has identified measures of gait biomechanics that differ between PwMS who have fallen and those who have not, but these biomechanical indices have not yet been leveraged to detect PwMS who have fallen. Moreover, they require the use of laboratory-based measurement technologies, which prevent clinical deployment. Here we demonstrate that a bidirectional long short-term (BiLSTM) memory deep neural network was able to identify PwMS who have recently fallen with good performance (AUC of 0.88) based on accelerometer data recorded from two wearable sensors during a one-minute walking task. These results provide substantial improvements over machine learning models trained on spatiotemporal gait parameters (21% improvement in AUC), statistical features from the wearable sensor data (16%), and patient-reported (19%) and neurologist-administered (24%) measures in this sample. The success and simplicity (two wearable sensors, only one-minute of walking) of this approach indicates the promise of inexpensive wearable sensors for capturing fall risk in PwMS.
Subject(s)
Deep Learning , Multiple Sclerosis , Wearable Electronic Devices , Accidental Falls , Gait , Humans , Multiple Sclerosis/diagnosis , Prospective Studies , Retrospective Studies , WalkingABSTRACT
BACKGROUND: Approximately half of the 2.3 million people with multiple sclerosis (PwMS) will fall in any three-month period. Currently clinicians rely on self-report measures or simple functional assessments, administered at discrete time points, to assess fall risk. Wearable inertial sensors are a promising technology for increasing the sensitivity of clinical assessments to accurately predict fall risk, but current accelerometer-based approaches are limited. RESEARCH QUESTION: Will metrics derived from wearable accelerometers during a 30-second chair stand test (30CST) correlate with clinical measures of disease severity, balance confidence and fatigue in PwMS, and can these metrics be used to accurately discriminate fallers from non-fallers? METHODS: Thirty-eight PwMS (21 fallers) completed self-report outcome measures then performed the 30CST while triaxial acceleration data were collected from inertial sensors adhered to the thigh and chest. Accelerometer metrics were derived for the sit-to-stand and stand-to-sit transitions and relationships with clinical metrics were assessed. Finally, the metrics were used to develop a logistic regression model to classify fall status. RESULTS: Accelerometer-derived metrics were significantly associated with multiple clinical metrics that capture disease severity, balance confidence and fatigue. Performance of a logistic regression for classifying fall status was enhanced by including accelerometer features (accuracy 74%, AUC 0.78) compared to the standard of care (accuracy 68%, AUC 0.74) or patient reported outcomes (accuracy 71%, AUC 0.75). SIGNIFICANCE: Accelerometer derived metrics were associated with clinically relevant measures of disease severity, fatigue and balance confidence during a balance challenging task. Inertial sensors could feasibly be utilized to enhance the accuracy of functional assessments to identify fall risk in PwMS. Simplicity of these accelerometer-based metrics could facilitate deployment for community-based monitoring.
Subject(s)
Accidental Falls/prevention & control , Mobility Limitation , Multiple Sclerosis/physiopathology , Wearable Electronic Devices , Accelerometry , Adult , Fatigue/physiopathology , Humans , Logistic Models , Middle Aged , Postural Balance , Risk Assessment , Severity of Illness Index , Sitting Position , Standing PositionABSTRACT
PURPOSE OF REVIEW: Walking impairments are highly prevalent in persons with multiple sclerosis (PwMS) and are associated with reduced quality of life. Walking is traditionally quantified with various measures, including patient self-reports, clinical rating scales, performance measures, and advanced lab-based movement analysis techniques. Yet, the majority of these measures do not fully characterize walking (i.e., gait quality) nor adequately reflect walking in the real world (i.e., community ambulation) and have limited timescale (only measure walking at a single point in time). We discuss the potential of wearable sensors to provide sensitive, objective, and easy-to-use assessment of community ambulation in PwMS. RECENT FINDINGS: Wearable technology has the ability to measure all aspects of gait in PwMS yet is under-studied in comparison with other populations (e.g., older adults). Within the studies focusing on PwMS, half that measure pace collected free-living data, while only one study explored gait variability in free-living conditions. No studies explore gait asymmetry or complexity in free-living conditions. Wearable technology has the ability to provide objective, comprehensive, and sensitive measures of gait in PwMS. Future research should investigate this technology's ability to accurately assess free-living measures of gait quality, specifically gait asymmetry and complexity.
Subject(s)
Gait/physiology , Multiple Sclerosis/physiopathology , Walking/physiology , Wearable Electronic Devices , Humans , Multiple Sclerosis/diagnosisABSTRACT
Physical therapists evaluate patients' movement patterns during functional tasks; yet, their ability to interpret these observations consistently and accurately is unclear. Physical therapists would benefit from a clinic-friendly method for accurately quantifying movement patterns during functional tasks. Inertial sensors, which are inexpensive, portable sensors capable of monitoring multiple body segments simultaneously, are a relatively new rehabilitation technology. We sought to validate an inertial sensor system by comparing lower limb and lumbar spine kinematic data collected simultaneously with a commercial inertial sensor system and a motion camera system while 10 subjects performed functional tasks. Mean and peak segment angular displacement data were calculated and compared between systems. Mean angular displacement root mean square error between the systems across all tasks and segments was <5°. Mean differences in peak displacements were generally acceptable (<5°) for the femur, tibia, and pelvis segments for all tasks; however, the inertial system overestimated lumbar flexion compared to the motion camera system. These data suggest that the inertial system is capable of measuring angular displacements within 5° of a system widely accepted for its accuracy. Standardization of sensor placement, better attachment methods, and improvement of inertial sensor algorithms will further increase the accuracy of the system.