Time-stretch spectroscopy for fast infrared absorption spectra of acetylene and hydroxyl radicals during combustion.

We have developed a diagnostic that uses time-domain spectroscopy to measure transient infrared absorption spectra in gases. Using a time-stretch Fourier transform approach, we can determine pressure, temperature, and gas concentrations with sub-microsecond time resolution for over two milliseconds. We demonstrate high-resolution (0.015 nm), time-resolved spectral measurements in an acetylene-oxygen gas mixture undergoing combustion. Within a 5 µs period during the reaction, the acetylene line intensities decrease substantially, and new spectra appear that are consistent with the hydroxyl (OH) radical, a common by-product in the combustion, deflagration, and detonation of fuels and explosives. Post-reaction pressures and temperatures were estimated from the OH spectra. The technique measures spectra from 1520 to 1620 nm using fiber optics, photodetectors, and digitizers. No cameras or spectrometers are required.

Simultaneous broadband laser ranging and photonic Doppler velocimetry for dynamic compression experiments.

A diagnostic was developed to simultaneously measure both the distance and velocity of rapidly moving surfaces in dynamic compression experiments, specifically non-planar experiments where integrating the velocity in one direction does not always give the material position accurately. The diagnostic is constructed mainly from fiber-optic telecommunications components. The distance measurement is based on a technique described by Xia and Zhang [Opt. Express 18, 4118 (2010)], which determines the target distance every 20 ns and is independent of the target speed. We have extended the full range of the diagnostic to several centimeters to allow its use in dynamic experiments, and we multiplexed it with a photonic Doppler velocimetry (PDV) system so that distance and velocity histories can be measured simultaneously using one fiber-optic probe. The diagnostic was demonstrated on a spinning square cylinder to show how integrating a PDV record can give an incorrect surface position and how the ranging diagnostic described here obtains it directly. The diagnostic was also tested on an explosive experiment where copper fragments and surface ejecta were identified in both the distance and velocity signals. We show how the distance measurements complement the velocity data. Potential applications are discussed.

Thermal transport in shock wave-compressed solids using pulsed laser heating.

A pulsed laser heating method was developed for determining thermal transport properties of solids under shock-wave compression. While the solid is compressed, a laser deposits a known amount of heat onto the sample surface, which is held in the shocked state by a transparent window. The heat from the laser briefly elevates the surface temperature and then diffuses into the interior via one-dimensional heat conduction. The thermal effusivity is determined from the time history of the resulting surface temperature pulse, which is recorded with optical pyrometry. Thermal effusivity is the square root of the product of thermal conductivity and volumetric heat capacity and is the key thermal transport parameter for relating the surface temperature to the interior temperature of the sample in a dynamic compression experiment. Therefore, this method provides information that is needed to determine the thermodynamic state of the interior of a compressed metal sample from a temperature measurement at the surface. The laser heat method was successfully demonstrated on tin that was shock compressed with explosives to a stress and temperature of ~25 GPa and ~1300 K. In this state, tin was observed to have a thermal effusivity of close to twice its ambient value. The implications on determining the interior shock wave temperature of tin are discussed.

Reflectance changes during shock-induced phase transformations in metals.

In performing shock wave experiments to study the characteristics of metals at high pressures, wave profiles (i.e., velocity measurements of the surface of the sample) are an established and useful way to study phase transformations. For example, a sudden change in the velocity or its slope can occur when the phase transformation induces a large volume change leading to a change in particle velocity. Allowing the shock to release into a transparent window that is in contact with the sample surface allows the study of conditions away from the shock Hugoniot. However, in cases where the wave profile is not definitive, an additional phase-transformation diagnostic is often useful. Changes in the electronic structure of the atoms in the crystal offer opportunities to develop new phase-change diagnostics. We have studied optical reflectance changes for several shock-induced phase transformations to see whether reflectance changes might be a generally applicable phase-transformation diagnostic. Shocks were produced by direct contact with explosives or with impacts from guns. Optical wavelengths for the reflectance measurements ranged from 355 to 700 nm. We studied samples of tin, iron, gallium, and cerium as each passed through a phase transformation during shock loading and, if observable, a reversion upon unloading. In addition to metals with complicated phase diagrams, we also measured dynamic, pressure-induced changes in the reflectivity of aluminum. For rapid solid-solid phase changes in tin and iron, we saw small changes in the surface scattering characteristics, perhaps from voids or rough areas frozen into the surface of the sample as it transformed to a new crystal structure. For melt in gallium and cerium, we saw changes in the wavelength dependence of the reflectance, and we surmise that these changes may result from changes in the crystal electronic structure. It appears that reflectance measurements can be a significant part of a larger suite of diagnostics to search for difficult-to-detect phase transformations.