Actuating Liquid Crystals Rapidly and Reversibly by Using Chemical Catalysis.

Microtubules and catalytic motor proteins underlie the microscale actuation of living materials, and they have been used in reconstituted systems to harness chemical energy to drive new states of organization of soft matter (e.g., liquid crystals (LCs)). Such materials, however, are fragile and challenging to translate to technological contexts. Rapid (sub-second) and reversible changes in the orientations of LCs at room temperature using reactions between gaseous hydrogen and oxygen that are catalyzed by Pd/Au surfaces are reported. Surface chemical analysis and computational chemistry studies confirm that dissociative adsorption of H2 on the Pd/Au films reduces preadsorbed O and generates 1 ML of adsorbed H, driving nitrile-containing LCs from a perpendicular to a planar orientation. Subsequent exposure to O2 leads to oxidation of the adsorbed H, reformation of adsorbed O on the Pd/Au surface, and a return of the LC to its initial orientation. The roles of surface composition and reaction kinetics in determining the LC dynamics are described along with a proof-of-concept demonstration of microactuation of beads. These results provide fresh ideas for utilizing chemical energy and catalysis to reversibly actuate functional LCs on the microscale.

Ferroelectric nematic droplets in their isotropic melt.

The isotropic to ferroelectric nematic liquid transition was theoretically studied over one hundred years ago, but its experimental studies are rare. Here we present experimental results and theoretical considerations of novel electromechanical effects of ferroelectric nematic liquid crystal droplets coexisting with the isotropic melt. We find that the droplets have flat pancake-like shapes that are thinner than the sample thickness as long as there is room to increase the lateral droplet size. In the center of the droplets a wing-shaped defect with low birefringence is present that moves perpendicular to a weak in-plane electric field, and then extends and splits in two at higher fields. Parallel to the defect motion and extension, the entire droplet drifts along the electric field with a speed that is independent of the size of the droplet and is proportional to the amplitude of the electric field. After the field is increased above 1 mV µm-1 the entire droplet gets deformed and oscillates with the field. These observations led us to determine the polarization field and revealed the presence of a pair of positive and negative bound electric charges due to divergences of polarization around the defect volume.

Coupling the chemical reactivity of bimetallic surfaces to the orientations of liquid crystals.

The development of responsive soft materials with tailored functional properties based on the chemical reactivity of atomically precise inorganic interfaces has not been widely explored. In this communication, guided by first-principles calculations, we design bimetallic surfaces comprised of atomically thin Pd layers deposited onto Au that anchor nematic liquid crystalline phases of 4'-n-pentyl-4-biphenylcarbonitrile (5CB) and demonstrate that the chemical reactivity of these bimetallic surfaces towards Cl2 gas can be tuned by specification of the composition of the surface alloy. Specifically, we use underpotential deposition to prepare submonolayer to multilayers of Pd on Au and employ X-ray photoelectron and infrared spectroscopy to validate computational predictions that binding of 5CB depends strongly on the Pd coverage, with ∼0.1 monolayer (ML) of Pd sufficient to cause the liquid crystal (LC) to adopt a perpendicular binding mode. Computed heats of dissociative adsorption of Cl2 on PdAu alloy surfaces predict displacement of 5CB from these surfaces, a result that is also confirmed by experiments revealing that 1 ppm Cl2 triggers orientational transitions of 5CB. By decreasing the coverage of Pd on Au from 1.8 ± 0.2 ML to 0.09 ± 0.02 ML, the dynamic response of 5CB to 1 ppm Cl2 is accelerated 3X. Overall, these results demonstrate the promise of hybrid designs of responsive materials based on atomically precise interfaces formed between hard bimetallic surfaces and soft matter.

Design of Chemoresponsive Soft Matter Using Hydrogen-Bonded Liquid Crystals.

Soft matter that undergoes programmed macroscopic responses to molecular analytes has potential utility in a range of health and safety-related contexts. In this study, we report the design of a nematic liquid crystal (LC) composition that forms through dimerization of carboxylic acids and responds to the presence of vapors of organoamines by undergoing a visually distinct phase transition to an isotropic phase. Specifically, we screened mixtures of two carboxylic acids, 4-butylbenzoic acid and trans-4-pentylcyclohexanecarboxylic acid, and found select compositions that exhibited a nematic phase from 30.6 to 111.7 °C during heating and 110.6 to 3.1 °C during cooling. The metastable nematic phase formed at ambient temperatures was found to be long-lived (>5 days), thus enabling the use of the LC as a chemoresponsive optical material. By comparing experimental infrared (IR) spectra of the LC phase with vibrational frequencies calculated using density functional theory (DFT), we show that it is possible to distinguish between the presence of monomers, homodimers and heterodimers in the mixture, leading us to conclude that a one-to-one heterodimer is the dominant species within this LC composition. Further support for this conclusion is obtained by using differential scanning calorimetry. Exposure of the LC to 12 ppm triethylamine (TEA) triggers a phase transition to an isotropic phase, which we show by IR spectroscopy to be driven by an acid-base reaction, leading to the formation of ammonium carboxylate salts. We characterized the dynamics of the phase transition and found that it proceeds via a characteristic spatiotemporal pathway involving the nucleation, growth, and coalescence of isotropic domains, thus amplifying the atomic-scale acid-base reaction into an information-rich optical output. In contrast to TEA, we determined via both experiment and computation that neither hydrogen bonding donor or acceptor molecules, such as water, dimethyl methylphosphonate, ethylene oxide or formaldehyde, disrupt the heterodimers formed in the LC, hinting that the phase transition (including spatial-temporal characteristics of the pathway) induced in this class of hydrogen bonded LC may offer the basis of a facile and chemically selective way of reporting the presence of volatile amines. This proposal is supported by exploratory experiments in which we show that it is possible to trigger a phase transition in the LC by exposure to volatile amines emitted from rotting fish. Overall, these results provide new principles for the design of chemoresponsive soft matter based on hydrogen bonded LCs that may find use as the basis of low-cost visual indicators of chemical environments.

Amplification of Elementary Surface Reaction Steps on Transition Metal Surfaces Using Liquid Crystals: Dissociative Adsorption and Dehydrogenation.

Elementary reaction steps, including adsorption and dissociation, of a range of molecular adsorbates on transition metal surfaces have been elucidated in the context of chemical catalysis. Here we leverage this knowledge to design liquid crystals (LCs) supported on ultrathin polycrystalline gold films (predominant crystallographic face is (111)) that are triggered to undergo orientational transitions by dissociative adsorption and dehydrogenation reactions involving chlorine and carboxylic acids, respectively, thus amplifying these atomic-scale surface processes in situ into macroscopic optical signals. We use electronic structure calculations to predict that 4'-n-pentyl-4-biphenylcarbonitrile (5CB), a room temperature nematic LC, does not bind to Au(111) in an orientation that changes upon dissociative adsorption of molecular chlorine, a result validated by experiments. In contrast, 4-cyano-4-biphenylcarboxylic acid (CBCA) is calculated to bind strongly to Au(111) in a perpendicular orientation via dehydrogenation of the carboxylic acid group, which we confirmed using polarization-modulation infrared reflection-absorption spectroscopy. A maximum coverage of 0.07 monolayer of CBCA on the gold surface is sufficient to cause a perpendicular orientation of the LC. Dissociative adsorption of Cl2 gas on the gold surface, resulting in 0.5 monolayer coverage of Cl, displaces CBCA from Au(111) and thus triggers a strikingly visible change in orientation of the LC. Infrared spectroscopy established the orientation of adsorbed CBCA to be parallel to the Cl covered surface, with the COOH plane perpendicular to the surface, as predicted by first-principles calculations. These results demonstrate the use of first-principles calculations and transition metal surfaces to design LCs that report in situ targeted atomic-scale surface processes.

Redox-Triggered Orientational Responses of Liquid Crystals to Chlorine Gas.

Surface-supported liquid crystals (LCs) that exhibit orientational and thus optical responses upon exposure to ppb concentrations of Cl2 gas are reported. Computations identified Mn cations as candidate surface binding sites that undergo redox-triggered changes in the strength of binding to nitrogen-based LCs upon exposure to Cl2 gas. Guided by these predictions, µm-thick films of nitrile- or pyridine-containing LCs were prepared on surfaces decorated with Mn2+ binding sites as perchlorate salts. Following exposure to Cl2 , formation of Mn4+ (in the form of MnO2 microparticles) was confirmed and an accompanying change in the orientation and optical appearance of the supported LC films was measured. In unoptimized systems, the LC orientational transitions provided the sensitivity and response times needed for monitoring human exposure to Cl2 gas. The response was also selective to Cl2 over other oxidizing agents such as air or NO2 and other chemical targets such as organophosphonates.

Liquid Crystals with Interfacial Ordering that Enhances Responsiveness to Chemical Targets.

The development of stimuli-responsive materials suitable for use in wearable sensors is a key unresolved challenge. Liquid crystals (LCs) are particularly promising, as they do not require power, are light-weight, and can be tuned to respond to a range of targeted chemical stimuli. Here, an advance is reported in the design of LCs for chemical sensors with the discovery of LCs that assume parallel orientations at free surfaces and yet retain their chemoresponsiveness. The resulting LC-based sensors are more sensitive and exhibit faster responses than previous LC sensor designs.

The role of anions in adsorbate-induced anchoring transitions of liquid crystals on surfaces with discrete cation binding sites.

We report a combined theoretical and experimental effort to elucidate systematically for the first time the influence of anions of transition metal salt-decorated surfaces on the orientations of supported films of nematic liquid crystals (LCs) and adsorbate-induced orientational transitions of these LC films. Guided by computational chemistry predictions, we find that nitrate anions weaken the binding of 4'-n-pentyl-4-biphenylcarbonitrile (5CB) to transition metal cations, as compared to perchlorate salts, although binding is still sufficiently strong to induce homeotropic (perpendicular) orientations of 5CB. In addition, we find the orientations of the LC to be correlated across all metal cations investigated by a molecular anchoring energy density that is calculated as the product of the single-site binding energy and metal cation binding site density on the surface. The weaker single-site binding energy caused by nitrate also facilitates competitive binding of adsorbates to the metal cations, leading to more facile orientational transitions induced by adsorbates. Finally, our analysis suggests that nitrate anions recruit water via hydrogen bonding to the metal binding sites, modulating further the relative net binding energies of 5CB and adsorbates to surfaces decorated with metal nitrates. After accounting for the presence of water, we find a universal exponential relationship between the calculated displacement free energies and measured dynamic response of LCs to adsorbates for all metal salts studied, independent of the metal salt anion.

Tuning charge carrier transport and optical birefringence in liquid-crystalline thin films: A new design space for organic light-emitting diodes.

Liquid-crystalline organic semiconductors exhibit unique properties that make them highly interesting for organic optoelectronic applications. Their optical and electrical anisotropies and the possibility to control the alignment of the liquid-crystalline semiconductor allow not only to optimize charge carrier transport, but to tune the optical property of organic thin-film devices as well. In this study, the molecular orientation in a liquid-crystalline semiconductor film is tuned by a novel blading process as well as by different annealing protocols. The altered alignment is verified by cross-polarized optical microscopy and spectroscopic ellipsometry. It is shown that a change in alignment of the liquid-crystalline semiconductor improves charge transport in single charge carrier devices profoundly. Comparing the current-voltage characteristics of single charge carrier devices with simulations shows an excellent agreement and from this an in-depth understanding of single charge carrier transport in two-terminal devices is obtained. Finally, p-i-n type organic light-emitting diodes (OLEDs) compatible with vacuum processing techniques used in state-of-the-art OLEDs are demonstrated employing liquid-crystalline host matrix in the emission layer.

Enhancing charge mobilities in organic semiconductors by selective fluorination: a design approach based on a quantum mechanical perspective.

Selective fluorination of organic semiconducting molecules is proposed as a means to achieving enhanced hole mobility. Naphthalene is examined here as a root molecular system with fluorination performed at various sites. Our quantum chemical calculations show that selective fluorination can enhance attractive intermolecular interactions while reducing charge trapping. Those observations suggest a design principle whereby fluorination is utilized for achieving high charge mobilities in the crystalline form. The utility of this design principle is demonstrated through an application to perylene, which is an important building block of organic semiconducting materials. We also show that a quantum mechanical perspective of nuclear degrees of freedom is crucial for a reliable description of charge transport.

Photocyclodehydrofluorination.

Mallory-type photocyclization involves a series of photoreactions of stilbenes, o-terphenyls and related derivatives, which undergo intramolecular cyclization via dihydrophenanthrene intermediates. In typical Mallory photocyclizations, oxidants are usually needed to produce the final phenanthrene-containing product. In the research described here, appropriately fluorinated stilbenes and o-terphenyls undergo ring closure and HF is eliminated. This photocyclodehydrofluorination (PCDHF) reaction is very useful to produce a wide range of selectively fluorinated polynuclear aromatic hydrocarbons that possess a phenanthrene (or heterocyclic analogue of phenanthrene) substructure. These fluorinated products are of great interest in various aspects of the materials science.

Small-molecule labeling of live cell surfaces for three-dimensional super-resolution microscopy.

Precise imaging of the cell surface of fluorescently labeled bacteria requires super-resolution methods because the size-scale of these cells is on the order of the diffraction limit. In this work, we present a photocontrollable small-molecule rhodamine spirolactam emitter suitable for non-toxic and specific labeling of the outer surface of cells for three-dimensional (3D) super-resolution (SR) imaging. Conventional rhodamine spirolactams photoswitch to the emitting form with UV light; however, these wavelengths can damage cells. We extended photoswitching to visible wavelengths >400 nm by iterative synthesis and spectroscopic characterization to optimize the substitution on the spirolactam. Further, an N-hydroxysuccinimide-functionalized derivative enabled covalent labeling of amines on the surface of live Caulobacter crescentus cells. Resulting 3D SR reconstructions of the labeled cell surface reveal uniform and specific sampling with thousands of localizations per cell and excellent localization precision in x, y, and z. The distribution of cell stalk lengths (a sub-diffraction-sized cellular structure) was quantified for a mixed population of cells. Pulse-chase experiments identified sites of cell surface growth. Covalent labeling with the optimized rhodamine spirolactam label provides a general strategy to study the surfaces of living cells with high specificity and resolution down to 10-20 nm.

Nanostructures of nematic materials of laterally branched molecules.

The synthesis and small-angle X-ray scattering (SAXS) characterization is reported for 20 laterally branched mesogenic molecules, which are derived from the common rod-shaped 2,5-bis([4-(octyloxy)phenyl]carbonyloxy) benzoic acid unit. These compounds have a varying degree of flexibility, in that their lateral branch is formed upon conversion of the acid to either an ester or an amide, and most laterally branched molecules exhibit relatively wide nematic liquid-crystal phases with a direct nematic-to-crystal transition at lower temperatures. SAXS studies reveal the presence of smectic-like nanostructures (clusters) with short-range order in the nematic phase, with characteristic correlation lengths from 3 to over 10 nm. The smectic layers that are contained in these clusters are tilted with respect to the nematic director by angles ranging from 0° (i.e. untilted) to 55°. In some compounds, the intensity of the SAXS peak corresponding to the smectic layer spacing depends strongly on temperature. The main features of the nanostructures can be understood based on the molecular structure; therefore, guiding future synthetic work towards more precisely controlled and technologically useful nanostructures in nematics.

Enzymatic activation of nitro-aryl fluorogens in live bacterial cells for enzymatic turnover-activated localization microscopy†

Many modern super-resolution imaging methods based on single-molecule fluorescence require the conversion of a dark fluorogen into a bright emitter to control emitter concentration. We have synthesized and characterized a nitro-aryl fluorogen which can be converted by a nitroreductase enzyme into a bright push-pull red-emitting fluorophore. Synthesis of model compounds and optical spectroscopy identify a hydroxyl-amino derivative as the product fluorophore, which is bright and detectable on the single-molecule level for fluorogens attached to a surface. Solution kinetic analysis shows Michaelis-Menten rate dependence upon both NADH and the fluorogen concentrations as expected. The generation of low concentrations of single-molecule emitters by enzymatic turnovers is used to extract subdiffraction information about localizations of both fluorophores and nitroreductase enzymes in cells. Enzymatic Turnover Activated Localization Microscopy (ETALM) is a complementary mechanism to photoactivation and blinking for controlling the emission of single molecules to image beyond the diffraction limit.

Tetranaphthyleno[5,6-bcd:11,12-b'c'd':17,18-b''c''d'':23,24-b'''c'''d''']tetrafuran.

The title compound, C(40)H(16)O(4) or [C(10)H(4)O](4), is a planar tetrameric cyclooligomer which crystallizes in the monoclinic space group P2(1)/n. The compound is located on an inversion center with the asymmetric unit consisting of half of the molecule. The compound displays an interesting packing structure, where the cyclooligomer displays both layered packing with respect to nearest neighbors and a rotation of adjacent planar rings that results in additional interactions. The geometric parameters of the compound agree well with those of comparable cyclooligomers, while the packing reveals some similarities and differences.

Three-dimensional superresolution colocalization of intracellular protein superstructures and the cell surface in live Caulobacter crescentus.

Recently, single-molecule imaging and photocontrol have enabled superresolution optical microscopy of cellular structures beyond Abbe's diffraction limit, extending the frontier of noninvasive imaging of structures within living cells. However, live-cell superresolution imaging has been challenged by the need to image three-dimensional (3D) structures relative to their biological context, such as the cellular membrane. We have developed a technique, termed superresolution by power-dependent active intermittency and points accumulation for imaging in nanoscale topography (SPRAIPAINT) that combines imaging of intracellular enhanced YFP (eYFP) fusions (SPRAI) with stochastic localization of the cell surface (PAINT) to image two different fluorophores sequentially with only one laser. Simple light-induced blinking of eYFP and collisional flux onto the cell surface by Nile red are used to achieve single-molecule localizations, without any antibody labeling, cell membrane permeabilization, or thiol-oxygen scavenger systems required. Here we demonstrate live-cell 3D superresolution imaging of Crescentin-eYFP, a cytoskeletal fluorescent protein fusion, colocalized with the surface of the bacterium Caulobacter crescentus using a double-helix point spread function microscope. Three-dimensional colocalization of intracellular protein structures and the cell surface with superresolution optical microscopy opens the door for the analysis of protein interactions in living cells with excellent precision (20-40 nm in 3D) over a large field of view (12 12 µm).

Low absorption liquid crystals for mid-wave infrared applications.

A partially fluorinated terphenyl liquid crystal with low absorption in both mid-wave infrared (MWIR) and near IR regions is developed and its properties evaluated. This compound exhibits a nematic phase (although only about 2 °C), reasonably high birefringence (Δn~0.2), low visco-elastic coefficient, and modest dielectric anisotropy (Δε = -2.7). This compound serves as an important first example for future development of low-loss MWIR liquid crystals and devices.

Superresolution imaging of targeted proteins in fixed and living cells using photoactivatable organic fluorophores.

Superresolution imaging techniques based on sequential imaging of sparse subsets of single molecules require fluorophores whose emission can be photoactivated or photoswitched. Because typical organic fluorophores can emit significantly more photons than average fluorescent proteins, organic fluorophores have a potential advantage in super-resolution imaging schemes, but targeting to specific cellular proteins must be provided. We report the design and application of HaloTag-based target-specific azido DCDHFs, a class of photoactivatable push-pull fluorogens which produce bright fluorescent labels suitable for single-molecule superresolution imaging in live bacterial and fixed mammalian cells.

Azido push-pull fluorogens photoactivate to produce bright fluorescent labels.

Dark azido push-pull chromophores have the ability to be photoactivated to produce bright fluorescent labels suitable for single-molecule imaging. Upon illumination, the aryl azide functionality in the fluorogens participates in a photochemical conversion to an aryl amine, thus restoring charge-transfer absorption and fluorescence. Previously, we reported that one compound, DCDHF-V-P-azide, was photoactivatable. Here, we demonstrate that the azide-to-amine photoactivation process is generally applicable to a variety of push-pull chromophores, and we characterize the photophysical parameters including photoconversion quantum yield, photostability, and turn-on ratio. Azido push-pull fluorogens provide a new class of photoactivatable single-molecule probes for fluorescent labeling and super-resolution microscopy. Lastly, we demonstrate that photoactivated push-pull dyes can insert into bonds of nearby biomolecules, simultaneously forming a covalent bond and becoming fluorescent (fluorogenic photoaffinity labeling).

Three-dimensional, single-molecule fluorescence imaging beyond the diffraction limit by using a double-helix point spread function.

We demonstrate single-molecule fluorescence imaging beyond the optical diffraction limit in 3 dimensions with a wide-field microscope that exhibits a double-helix point spread function (DH-PSF). The DH-PSF design features high and uniform Fisher information and has 2 dominant lobes in the image plane whose angular orientation rotates with the axial (z) position of the emitter. Single fluorescent molecules in a thick polymer sample are localized in single 500-ms acquisitions with 10- to 20-nm precision over a large depth of field (2 microm) by finding the center of the 2 DH-PSF lobes. By using a photoactivatable fluorophore, repeated imaging of sparse subsets with a DH-PSF microscope provides superresolution imaging of high concentrations of molecules in all 3 dimensions. The combination of optical PSF design and digital postprocessing with photoactivatable fluorophores opens up avenues for improving 3D imaging resolution beyond the Rayleigh diffraction limit.