Advancement of Langmuir probe-based laser photo-detachment technique for negative ion density measurement in a high-power helicon plasma source.

In the pursuit of precise diagnostics for measuring negative ion density in a helicon plasma source (HPS), a new approach utilizing a radio frequency (RF) broadband transformer-based Langmuir probe is developed specifically for laser photo-detachment (LPD) analysis. This inductively coupled LPD technique is useful for high power RF systems in which capacitive RF noise is in the same scale as the pulsed photo-detachment signal. The signal acquired by this transformer-based probe is compared against the conventional Langmuir probe-based LPD technique, revealing a remarkable enhancement in signal fidelity through an improved signal-to-noise ratio (SNR) achieved by the RF broadband transformer methodology. In addition, the localized hydrogen negative ion density measurements obtained through this probe are harmoniously aligned with the line-averaged negative ion density derived from the cavity ringdown spectroscopy (CRDS) technique. These concurrence measurements highlight the RF broadband transformer-based approach's accuracy in capturing localized negative ion density during helicon mode operation in an HPS setup. Furthermore, the correlation of negative ion density values with RF input exhibits a consistent trend in tandem with background plasma density. Notably, both CRDS and LPD measurements ascertain negative ion densities ranging from ∼5 to 6×1016 m-3 under an RF power of 500-700 W and a pressure of 8 × 10-3 mbar, all under the influence of a 55 G axial magnetic field. These specific parameters represent the optimal operational configuration for effective negative ion production with the present experimental HPS setup. Due to its better SNR, the RF broadband transformer-based Langmuir probe emerges as a useful tool for LPD diagnostics, particularly in the presence of pervasive RF noise.

Overview of diagnostics on a small-scale RF source for fusion (ROBIN) and the one planned for the diagnostic beam for ITER.

India is responsible for the supply of diagnostic neutral beam systems for ITER to diagnose its helium ash during the deuterium-tritium plasma phase using the charge exchange recombination spectroscopy technique. Considering the many first of its kind in terms of technologies and beam development aspects, ITER Indian domestic agency has adopted a strategy of developing the technology and beam experimentation in parallel. On the beam development front three test beds, namely, the ROBIN (Rf Operated Beam source in India for Negative ion research), the TWIN (TWo rf driver-based Indigenously built Negative ion source), and the INTF (INdian Test Facility) are presently in their various phases of operation, optimization, and setting up at IPR, respectively. Experiments related to plasma production, beam production, and acceleration up to 30 keV in volume and surface mode have been performed on ROBIN. The maximum negative hydrogen ion current density to a tune of 27 mA/cm2 is obtained in the surface mode with Cs injection. Optimal source performance requires optimal surface conditions, minimum impurities, careful characterization of the plasma, cesium feed and its redistribution, and optimal wall temperatures of the surfaces of the plasma box and the plasma grid. A combination of probe, optical, vacuum, laser based, electrical, and calorimetric diagnostic measurements enables such a control. At ROBIN, the above diagnostics are being used regularly. The operational and diagnostic experiences on ROBIN shall provide the desired experience and database for operations of TWIN and INTF in the coming years. A large number of conventional and advanced diagnostic techniques are used for plasma and beam characterization. These diagnostics are suitable not only to detect and understand the plasma but also for studies related to impurity evolution. The temporal evolution of impurities significantly impacts the plasma and beam properties. The studies help in establishing correlations between physical parameters and operational parameters to optimize the source performance ensuring adequate safety and investment protection. This paper will present a brief overview of various diagnostics implemented, lessons learned, and the results obtained from ROBIN. In addition, an outline of the diagnostics planned for INTF based on the experience and understandings developed during the present experiments on ROBIN and TWIN and considering the requirements of large systems shall be discussed.

Quantification of atomic hydrogen anion density in a permanent magnet based helicon ion source (HELEN) by using pulsed ring down spectroscopy.

In the present work, a permanent magnet-based helicon plasma source (HELEN) is characterized as a negative ion source. A noninvasive diagnostic technique based on cavity ring down spectroscopy (CRDS) is developed to measure the line-integrated negative hydrogen ion (H-) density in HELEN. This paper discusses the experimental results in which negative hydrogen ion density is measured for different magnetic field, pressure, and RF (13.56 MHz) power configurations. It is observed that in high power range (800-850 W), the source is operating in helicon wave heating mode with a background plasma density of ∼1018 m-3 and electron temperature of ∼2 eV. Negative hydrogen ion density is measured by CRDS method and also by optical emission spectroscopic technique. The measured negative ion density is in the range of ∼1016 m-3 under volume mode operational condition even without any use of standard magnetic filter or cesium seeding in the downstream region. The influence of pressure variation (pressure range from 4 × 10-3 mbar to 4 × 10-2 mbar) on negative ion density production is not significant, except for a particular axial magnetic field configuration (55 G) and at 8 × 10-3 mbar pressure, where ∼34% hike is observed.

Overview of ion source characterization diagnostics in INTF.

INdian Test Facility (INTF) is envisaged to characterize ITER diagnostic neutral beam system and to establish the functionality of its eight inductively coupled RF plasma driver based negative hydrogen ion source and its beamline components. The beam quality mainly depends on the ion source performance and therefore, its diagnostics plays an important role for its safe and optimized operation. A number of diagnostics are planned in INTF to characterize the ion source performance. Negative ions and its cesium contents in the source will be monitored by optical emission spectroscopy (OES) and cavity ring down spectroscopy. Plasma near the extraction region will be studied using standard electrostatic probes. The beam divergence and negative ion stripping losses are planned to be measured using Doppler shift spectroscopy. During initial phase of ion beam characterization, carbon fiber composite based infrared imaging diagnostics will be used. Safe operation of the beam will be ensured by using standard thermocouples and electrical voltage-current measurement sensors. A novel concept, based on plasma density dependent plasma impedance measurement using RF electrical impedance matching parameters to characterize the RF driver plasma, will be tested in INTF and will be validated with OES data. The paper will discuss about the overview of the complete INTF diagnostics including its present status of procurement, experimentation, interface with mechanical systems in INTF, and integration with INTF data acquisition and control systems.

Active terahertz beam steering by photo-generated graded index gratings in thin semiconductor films.

We demonstrate active beam steering of terahertz radiation using a photo-excited thin layer of gallium arsenide. A constant gradient of phase discontinuity along the interface is introduced by an spatially inhomogeneous density of free charge carriers that are photo-generated in the GaAs with an optical pump. The optical pump has been spatially modulated to form the shape of a planar blazed grating. The phase gradient leads to an asymmetry between the +1 and -1 transmission diffracted orders of more than a factor two. Optimization of the grating structure can lead to an asymmetry of more than one order of magnitude. Similar to metasurfaces made of plasmonic antennas, the photo-generated grating is a planar structure that can achieve large beam steering efficiency. Moreover, the photo-generation of such structures provides a platform for active THz beam steering.

Photo-generated THz antennas.

Electromagnetic resonances in conducting structures give rise to the enhancement of local fields and extinction efficiencies. Conducting structures are conventionally fabricated with a fixed geometry that determines their resonant response. Here, we challenge this conventional approach by demonstrating the photo-generation of THz linear antennas on a flat semiconductor layer by the structured optical illumination through a spatial light modulator. Free charge carriers are photo-excited only on selected areas, which enables the realization of different conducting antennas on the same sample by simply changing the illumination pattern, thus without the need of physically structuring the sample. These results open a wide range of possibilities for the all-optical spatial control of resonances on surfaces and the concomitant control of THz extinction and local fields.

Pressure-assisted melt-filling and optical characterization of Au nano-wires in microstructured fibers.

We report a novel splicing-based pressure-assisted melt-filling technique for creating metallic nanowires in hollow channels in microstructured silica fibers. Wires with diameters as small as 120 nm (typical aspect ration 50:1) could be realized at a filling pressure of 300 bar. As an example we investigate a conventional single-mode step-index fiber with a parallel gold nanowire (wire diameter 510 nm) running next to the core. Optical transmission spectra show dips at wavelengths where guided surface plasmon modes on the nanowire phase match to the glass core mode. By monitoring the side-scattered light at narrow breaks in the nanowire, the loss could be estimated. Values as low as 0.7 dB/mm were measured at resonance, corresponding to those of an ultra-long-range eigenmode of the glass-core/nanowire system. By thermal treatment the hollow channel could be collapsed controllably, permitting creation of a conical gold nanowire, the optical properties of which could be monitored by side-scattering. The reproducibility of the technique and the high optical quality of the wires suggest applications in fields such as nonlinear plasmonics, near-field scanning optical microscope tips, cylindrical polarizers, optical sensing and telecommunications.

Optofluidic refractive-index sensor in step-index fiber with parallel hollow micro-channel.

We present a simple refractive index sensor based on a step-index fiber with a hollow micro-channel running parallel to its core. This channel becomes waveguiding when filled with a liquid of index greater than silica, causing sharp dips to appear in the transmission spectrum at wavelengths where the glass-core mode phase-matches to a mode of the liquid-core. The sensitivity of the dip-wavelengths to changes in liquid refractive index is quantified and the results used to study the dynamic flow characteristics of fluids in narrow channels. Potential applications of this fiber microstructure include measuring the optical properties of liquids, refractive index sensing, biophotonics and studies of fluid dynamics on the nanoscale.

Plasmon resonances on gold nanowires directly drawn in a step-index fiber.

We report the successful production of high-quality gold wires, with diameters down to 260nm, by direct fiber drawing from a gold-filled fused-silica cane. The stack-and-draw technique makes it straightforward to incorporate a conventional step-index core, adjacent to the gold wire, in the cane. In the drawn fiber, strong coupling of light from the glass core to SPP resonances on the gold wire is observed at specific well-defined wavelengths. Such embedded wires have many potential applications, for example, as nanoscale electrodes, in nonlinear optical plasmonics, and as near-field scanning optical microscope tips.

Optical properties of photonic crystal fiber with integral micron-sized Ge wire.

Using a selective hole closure technique, individual hollow channels in silica-air photonic crystal fibers are filled with pure Ge by pumping in molten material at high pressure. The smallest channels filled so far are 600 nm in diameter, which is 10x smaller than in previous work. Electrical conductivity and micro-Raman measurements indicate that the resulting cm-long wires have a high degree of crystallinity. Optical transmission spectra are measured in a sample with a single wire placed adjacent to the core of an endlessly single-mode photonic crystal fiber. This renders the fiber birefringent, as well as causing strongly polarization-dependent transmission losses, with extinction ratios as high as 30 dB in the visible. In the IR, anti-crossings between the glass-core mode and resonances on the high index Ge wire create a series of clear dips in the spectrum transmitted through the fiber. The measurements agree closely with the results of finite-element simulations in which the wavelength dependence of the dielectric constants is taken fully into account. A toy model based on a multilayer structure is used to help interpret the results. Finally, the temperature dependence of the anti-crossing wavelengths is measured, the preliminary results suggesting that the structure might form the basis of a compact optical thermometer. Since Ge provides electrical conductance together with low-loss guidance in the mid-IR, Ge-filled PCF seems likely to lead to new kinds of in-fiber detector and sensor, as well as having potential uses in ultra-low-threshold nonlinear optical devices.

Histoenzymological studies on the distribution of Ca++-activated adenosine triphosphatase amongst the constituents of the retinae of Varanus and Ptyas.

A comparative histoenzymological study of the distribution of Ca++-activated adenosine triphosphatase amongst the various constituents of the retinae of Varanus and Ptyas, hitherto not reported in the literature, has been made in great detail. The outer segment has shown an enzymatic activity of a very high degree both in Varanus and Ptyas. A detailed discussion is incorporated in analysing the possible role of the enzyme in the metabolic set-up of the area in relation to the resolution of the stimuli. Besides the outer segments, the areas possessing the lay-outs of nerve fibres and synaptic contacts have also shown ATPase activity of high degree in the retinae. The role of the ATPase in the nerve fibres and the synapses has been discussed in detail.

Histoenzymological studies on the distribution of certain phosphatases in the retinae of owlet (Athene brama) and house sparrow (Passer domesticus).

A comparative study on the distribution of alkaline phosphatase (AlP), acid phosphatase (AcP) and 5'-nucleotidase (5-N) amongst the different constituents of retinae of owlet and house sparrow revealed some interesting aspects of the localization of such phosphatases in both the cases. The outer segment of photoreceptors, where light strikes first, are positive for all the phosphatases. Further, areas composed of synapses, reveal activity of the three enzymes. Another interesting aspect is related to the total absence of the activity of AlP and 5-N in the ganglion cells of both the animals. Other sites of phosphatases in various layers have been also identified. The possible metabolic roles of various phosphatases at different sites have been discussed.

A comparative study on the distribution of non-specific esterase amongst the various constituents of retinas of some vertebrates.

A wide coverage of the retinae of a large number of animals (Calotes, Varanus, Naja, Athene, Passer, Streptopelia, Psittacula and Funambulus) from the point of view of the histoenzymological distribution of non-specific esterase amongst the various constituents reveals mostly identical patterns. They are as follows: 1. Outer segments - positive in all cases. 2. Outer plexiform layer - equipped with enzymatic activity in all the instances. 3. Inner nuclear layer - thin cytoplasmic rim of the neurons characterized by positive activity; the nuclei of the neurons are completely negative. 4. Inner plexiform layer - this layer is endowed with the enzymatic activity. 5. Ganglion cells - negative in all cases. 6. Nerve fibres of the layer of nerve fibres, situated adjasent to ganglion cells are positive in all the animals; in case of squirrel oligodandroglial cells present in the region have demonstrated activity of a high order. On of the high-lights of the present contribution is demarcation of the inner plexiform layer into three stratified zones, equipped with enzymatic activity in Calotes, Streptopelia, Naja and Funambulus. Such stratifications are not seen in Varanus, Passer and Psittacula. The significance of the various patterns and the equipment of the enzyme in various constituents at various locals have been discussed in relation to the metabolic functions, zone-wise and interzone-wise in visual processes of various animals.

On the distributive patterns of phosphatases and non-specific esterase and their functional aspects amongst the constituents of the photoreceptors of the Indian Medicinal leech, Poecilobdella granulosa (Savigny, 1822).

In the present contribution the distributive pattern of phosphatases and non-specific esterase amongst the constituents of the leech eye has been revealed and the significance of the enzymatic locales in relation to the visual processes has been discussed. All the phosphatases studied demonstrate absence of the activity in the lens. Activity of the phosphatases, however, is restricted to the plasma membrane and associated cytoplasm to varying degrees. The significance of the phosphatases in the nerve impulses and transmission has been highlightened. The observation of considerable significance relates the demonstration of a high degree of non-specific esterase activity in the lens, which has defied all the phosphatases. Another observation relates to the positive activity of 5-nucleotidase in the group of axons constituting optic nerve. The significance of this observation has also been discussed.

On the distributive patterns of ATPase activity and its functional significance in retinae of certain birds.

The present study incorporates the details of distribution of adenosine triphosphatase amongst the various constituents of retinae of Passer, Psittacula, Streptopelia and Athene. The outer segments in all the cases are intensely positive for the enzyme. This is the part where the light strikes first and initiates the visual processes. The nuclear layers are also positive for the enzyme activity. It is interesting to note that inner plexiform layers show clear-out demarcations of various sub-synaptic layers in all the birds except Psittacula. The ganglion cells and optic nerve fibres are also positive for the enzyme.