In Vitro Assessment of the Physiologically Relevant Oral Bioaccessibility of Metallic Elements in Edible Herbs Using the Unified Bioaccessibility Protocol.

In this work, the total content of seven metallic elements (Fe, Cu, Zn, Mg, Pb, Ni, and Co) in common edible herbs was determined and related to their bioaccessibility by an in vitro human digestion model. Specifically, the unified bioaccessibility protocol developed by the BioAccessibility Research Group of Europe (BARGE) was used to determine the release of each element during gastric and gastrointestinal digestion. The results show that Fe, Zn, and Mg are released during gastric digestion (34-57% Fe, 28-80% Zn, 79-95% Mg), but their overall bioaccessibility is reduced in the gastrointestinal tract (<30%). On the contrary, Cu is more bioaccessible during gastrointestinal digestion (38-60%). Pb, Ni, and Co exhibited similar bioaccessibility in both gastric and gastrointestinal fluids. Principle component analysis of the data shows that the classification of the nutritional value of herbs differs between the total and the gastrointestinal concentration, suggesting that the total concentration alone is not an adequate indicator for drawing secure conclusions concerning the nutritional benefits of edible plant species.

Robust Al3+ MOF with Selective As(V) Sorption and Efficient Luminescence Sensing Properties toward Cr(VI).

Herein, we report the synthesis and characterization of a new robust Al3+ metal-organic framework MOF, [Al(OH)(PATP)]·solvent (Al-MOF-1, with PATP2- = 2-((pyridin-2-ylmethyl)amino)terephthalate). Al-MOF-1 exhibits excellent stability from highly acidic (pH = 2) to basic (pH = 12) aqueous solutions or in the presence of oxoanionic species [As(V) and Cr(VI)]. On the contrary, the related MIL-53(Al) MOF (Al(OH) (BDC), with BDC2- = terephthalate) shows a partial structure collapse under these conditions, signifying the superior chemical robustness of Al-MOF-1. Al-MOF-1 was proved to be an effective sorbent toward As(V) with efficient sorption capacity (71.9 ± 3.8 mg As/g), rapid sorption kinetics (equilibrium time ≤1 min), and high selectivity in the presence of various competing anions. Furthermore, Al-MOF-1 revealed high sorption capacities for Cr(VI) species in both neutral (124.5 ± 8.6 mg Cr/g) and acidic (63 ± 2 mg Cr/g) aqueous media, combining fast kinetics and relatively good selectivity. The limited porosity (BET = 38 m2/g) and small pores (2-3 Å) of the material indicate that the sorption process occurs exclusively on the external surface of Al-MOF-1 particles. The driving force for the capture of oxoanions by Al-MOF-1 is the strong electrostatic interactions between the oxoanionic species and the positively charged surface of MOF particles. Aiming at a practical wastewater treatment, we have also immobilized Al-MOF-1 on a cotton substrate, coated with polydopamine. The fabric sorbent exhibited highly effective removal of the toxic oxoanionic species from aqueous media under either batch or dynamic (continuous flow) conditions. In addition, Al-MOF-1 was found to be a promising luminescence sensor for detecting trace amounts of Cr(VI) in real water samples, with Cr(VI) being successfully detected at concentrations well below the acceptable limits (<50 ppb). Moreover, Al-MOF-1 was demonstrated to be a sufficient water sensor in organic solvents (LOD ≤0.25% v/v). All the above indicate that Al-MOF-1 represents a multifunctional material with a multitude of potential applications, such as environmental remediation, industrial wastewater treatment, chemical analysis, and water determination in biofuels.