Mechanical and Chemical Changes in the Adhesive-Dentin Interface after Remineralization.

PURPOSE: To evaluate the remineralization effects of Bioglass 45S5 (BAG) on dentin composition, adhesive-dentin bond strength, as well as interface and diffusion zone thickness. MATERIALS AND METHODS: Dentin specimens were assigned to a control group (CG), in which the adhesive was applied following the manufacturer's instructions, and a remineralized group (RG), in which remineralization treatment was carried out by rubbing a remineralization solution (0.015 g of BAG with 1.35 ml of distilled water) on the etched dentin surface for 30 s before applying the adhesive. For bioactive analysis (n = 10), control and remineralized dentin were investigated using micro-Raman spectroscopy (mRS) and scanning electron microscopy (SEM). Stick specimens prepared with a three-step etch-and-rinse adhesive were submitted to a microtensile bond strength (µTBS) test (n = 10) after 24 h (24 h) and eight months (8 m). Micro-RS 3D-maps (n = 10) characterized the adhesive-dentin interface composition and diffusion zone thickness, and SEM images (n = 10) evaluated interface thickness. Data were analyzed using Student's t-test or two-way ANOVA and Tukey-Kramer's post-hoc test (α = 0.05). RESULTS: Remineralization treatment increased the mineral content of dentin. Mean µTBSs were statistically different at 24 h, with RG higher than CG; however, this difference was not significant at 8 m. When the adhesive was applied on remineralized dentin, its penetration was reduced, its physical interaction with phosphate was improved, and its degree of conversion increased. The diffusion zone in the CG did not differ from that of the RG, and interface thickness values of the CG did not differ from that of the RG. CONCLUSION: Remineralization treatment promoted mineral growth on the dentin surface, improved the interaction of dentin with adhesive monomers, and consequently resulted in higher immediate bond strengths.

Study of the chemical interaction between a high-viscosity glass ionomer cement and dentin.

OBJECTIVE: To investigate the chemical interactions between a high-viscosity glass ionomer cement (GIC) (KetacTM Molar Easymix, 3M ESPE, Seefeld, Bavaria, Germany) and human dentin. It was also analyzed the dynamics of GIC setting mechanism based on the time intervals required for the GIC and the GIC mixed with dentin to achieve stability. MATERIAL AND METHODS: Each constituent of GIC - powder (P) and liquid (L) - and powdered dentin (D), as well as the associations P+L, D+L, and P+L+D in the concentrations of 29%, 50%, 65%, 78%, 82%, and 92% of GIC were analyzed with Fourier transform infrared (FTIR) and Raman spectroscopy. RESULTS: New optical absorption bands and/or Raman bands, which were not present in P, L, or D, were observed in the associations. The concentrations of 29% and 50% of GIC showed higher interaction, revealing that the amount of dentin influences the formation of new optical absorption or scattering bands. FTIR bands showed that the setting time to achieve bond stability was longer for the high-viscosity GIC (38±7 min) than for the sample with 29% of GIC (28±4 min). CONCLUSIONS: The analysis revealed the formation of new compounds or molecular rearrangements resulting from the chemical interactions between GIC and dentin. Moreover, this study provides an effective method to evaluate the dynamics of the setting mechanism of GICs.

Challenges in luting fibre posts: Adhesion to the post and to the dentine.

OBJECTIVE: To investigate the relationship between physicochemical interactions of resin luting cements with dentine and retention of fibre posts in root canals. METHODS: Retention of fibre posts (RelyX Fiber Post) was assessed by the pull-out method. The diffusion zone of the cements and their chemical interaction with dentine were estimated by micro-Raman spectroscopy. Resin luting cements employing etch-and-rinse (Rely X Ultimate and Variolink II), self-etch (Rely X Ultimate and Panavia F2.0), or self-adhesive (RelyX Unicem 2) modes were investigated. Data were analyzed by analysis of variance followed by Tukey HSD tests. RESULTS: The retention of the fibre posts decreased in the following order: RelyX Ultimate, etch-and-rinse mode>RelyX Unicem 2≥RelyX Ultimate, self-etch mode≥Panavia F2.0≥Variolink II (p<0.05). One of the etch-and-rinse mode cements presented the deepest diffusion zone, while the other, along with the self-adhesive cement, produced the shallowest zone. Cements used in the self-etch mode showed intermediary diffusion into dentine (p<0.05). All resin luting cements showed some degree of chemical interaction with dentine, the highest recorded for RelyX Ultimate used in the etch-and-rinse mode and the lowest for Panavia F2.0 (p<0.05). The retention of fibre posts in the root canal could be attributed neither to the mode of interaction of the luting cements with dentine nor to their ability to diffuse into dentine. SIGNIFICANCE: Chemical interaction between the resin luting cement and the dentine paired with adequate post pretreatment contribute positively to the retention of fibre posts.

Study of the chemical interaction between a high-viscosity glass ionomer cement and dentin

Abstract Objective To investigate the chemical interactions between a high-viscosity glass ionomer cement (GIC) (KetacTM Molar Easymix, 3M ESPE, Seefeld, Bavaria, Germany) and human dentin. It was also analyzed the dynamics of GIC setting mechanism based on the time intervals required for the GIC and the GIC mixed with dentin to achieve stability. Material and Methods Each constituent of GIC - powder (P) and liquid (L) - and powdered dentin (D), as well as the associations P+L, D+L, and P+L+D in the concentrations of 29%, 50%, 65%, 78%, 82%, and 92% of GIC were analyzed with Fourier transform infrared (FTIR) and Raman spectroscopy. Results New optical absorption bands and/or Raman bands, which were not present in P, L, or D, were observed in the associations. The concentrations of 29% and 50% of GIC showed higher interaction, revealing that the amount of dentin influences the formation of new optical absorption or scattering bands. FTIR bands showed that the setting time to achieve bond stability was longer for the high-viscosity GIC (38±7 min) than for the sample with 29% of GIC (28±4 min). Conclusions The analysis revealed the formation of new compounds or molecular rearrangements resulting from the chemical interactions between GIC and dentin. Moreover, this study provides an effective method to evaluate the dynamics of the setting mechanism of GICs.

Analytical method to estimate resin cement diffusion into dentin.

This study analyzed the diffusion of two resin luting agents (resin cements) into dentin, with the aim of presenting an analytical method for estimating the thickness of the diffusion zone. Class V cavities were prepared in the buccal and lingual surfaces of molars (n=9). Indirect composite inlays were luted into the cavities with either a self-adhesive or a self-etch resin cement. The teeth were sectioned bucco-lingually and the cement­dentin interface was analyzed by using micro-Raman spectroscopy (MRS) and scanning electron microscopy. Evolution of peak intensities of the Raman bands, collected from the functional groups corresponding to the resin monomer (C─O─C, 1113 cm(−1)) present in the cements, and the mineral content (P─O, 961 cm(−1)) in dentin were sigmoid shaped functions. A Boltzmann function (BF) was then fitted to the peaks encountered at 1113 cm(−1) to estimate the resin cement diffusion into dentin. The BF identified a resin cement­dentin diffusion zone of 1.8±0.4 µm for the self-adhesive cement and 2.5±0.3 µm for the self-etch cement. This analysis allowed the authors to estimate the diffusion of the resin cements into the dentin. Fitting the MRS data to the BF contributed to and is relevant for future studies of the adhesive interface.

Adhesive Restorations as An Esthetic Solution in Dentinogenesis Imperfecta.

Loss of tooth structure is the main sequela of dentinogenesis imperfecta (DI). Due to severe enamel attrition, patients with DI often present with esthetic, occlusal, endodontic, and speech complications. Therefore, an interdisciplinary approach, divided into separate clinical steps, should be developed to provide comprehensive dental rehabilitation. The purpose of this case report is to discuss the use of composite resin restorations as a transitional treatment step for the anterior teeth of an eight-year-old boy with DI until his bone and dental development permit orthodontic and orthognatic surgery.

Factors that drive dentists towards or away from dental caries preventive measures: systematic review and metasummary.

BACKGROUND: Dental caries is a serious public health concern. The high cost of dental treatment can be avoided by effective preventive measures, which are dependent on dentists' adherence. This study aimed to evaluate the factors that drive dentists towards or away from dental caries preventive measures. METHODS AND FINDINGS: This systematic review was registered in PROSPERO (CRD42012002235). Several databases as well as the reference lists and citations of the included publications were searched according to PRISMA guidelines, yielding 18,276 titles and abstracts, which were assessed to determine study eligibility. Seven qualitative studies and 41 surveys (36,501 participants) remained after data extraction and interpretation. A total of 43 findings were abstracted from the reports and were grouped together into 6 categories that were judged to be topically similar: education and training, personal beliefs, work conditions, remuneration, gender, place of residence and patients. The main findings for adherence based on their calculated frequency effect sizes (ES) were teamwork (21%) and post-graduation (12%), while for non-adherence were biologicism (27%), and remuneration for preventive procedures (25%). Intensity ES were also calculated and demonstrated low prevalence of the findings. Quality assessment of the studies demonstrated that the methodological quality, particularly of surveys, varied widely among studies. CONCLUSIONS: Despite the questionable quality of the included reports, the evidence that emerged seems to indicate that further education and training coupled with a fairer pay scheme would be a reasonable approach to change the balance in favor of the provision of dental caries preventive measures by dentists. The results of this review could be of value in the planning and decision making processes aimed at encouraging changes in professional dental practice that could result in the improvement of the oral health care provided to the population in general.

Analysis of the golden proportion and width/height ratios of maxillary anterior dentition in patients with lateral incisor agenesis.

OBJECTIVE: The purpose of this study was to assess the presence of the golden proportion (GP) in the facial view tooth-to-tooth width proportion of the six maxillary anterior teeth and to evaluate the width/height (W/H) ratios of the incisors of patients with maxillary lateral incisor (LI) agenesis treated either with implants or orthodontically (by moving canines into the position of the laterals, recontouring them, and placing composite restorations over the repositioned teeth). MATERIALS AND METHODS: Forty-eight patients with LI agenesis were divided into four experimental groups: unilateral recontouring group (N = 10), bilateral recontouring group (BRG, N = 18), unilateral implant group (UIG, N = 10), bilateral implant group (N = 10), and a control group (CG, N = 25) of patients without agenesis. GP ratios were determined on patients' dental casts placed over Levin's grids, whereas W/H ratios were measured directly on the casts and a millimeter ruler to determine these distances. Statistical analysis was performed with Shapiro-Wilk, Kruskal-Wallis, Mann-Whitney, Friedman, and Wilcoxon tests (p < 0.05). RESULTS: The incidence of GP in the tooth-to-tooth width proportions was significantly different between groups and more commonly found between centrals and laterals than between laterals and canines. The GP was more likely to be observed in the BRG, UIG, and CG. The results demonstrated that the GP was not found to be present in the majority of the cases treated with maxillary agenesis, regardless of the method of treatment. The mean W/H ratios of the laterals ranged between 0.75 and 0.90. CONCLUSION: Although the GP may be a useful diagnostic guide, it was not observed in the majority of esthetic outcomes of patients treated with maxillary LI agenesis in this study. CLINICAL SIGNIFICANCE: The assessment of the golden proportion and width/height ratio of upper anterior teeth in patients with upper lateral incisor agenesis treated with either implants or tooth re-contouring may assist dentists and patients in deciding the best treatment option based on the peculiarities of each case.

Abordagem interdisciplinar para o fechamento de diastemas associados à discrepância de Bolton / Interdisciplinary management of diastemata associated to Bolton discrepancy

Diastemas anteriores podem comprometer a harmonia do sorriso. Devido à multiplicidade de suas etiologias, a eleboração de um plano de tratamento individual é essencial para o sucesso do tratamento. Muitas alternativas têm sido propostas para a finalização de tratamentos ortodônticos na presença de diastemas múltiplos remanescentes em função da discrepância dentária de Bolton. Pretende-se, com este trabalho, enfatizar o tratamento interdisciplinar, ressaltando a importância da contribuição da Dentística na finalização de casos ortodônticos. O uso da resina composta na técnica direta é uma alternativa conservadora, previsível e reversível.

Fechamento de diastemas múltiplos anteriores com resina composta / Closing anterior diastemata with composite resin

Muitas alternativas têm sido propostas para a finalização de tratamentos ortodônticos na presença de diastemas múltiplos remanescentes em função da discrepância dentária de Bolton. Os autores apresentam um caso clínico de abordagem interdisciplinar, no qual, após a terapia ortodôntica, realizou-se um guia de silicone a partir do enceramento diagnóstico do modelo de gesso, que serviu como referência na orientação dos incrementos de resina composta realizada pela técnica direta. Pretende-se, com este trabalho, ressaltar a importância da contribuição da dentística restauradora na finalização de casos ortodônticos. O uso da resina composta na técnica direta mostrou ser uma alternativa conservadora, previsível e reversível.

Many alternatives have been proposed for the completion of orthodontic treatment in the presence of remaning diastemata according to the Bolton analysis. The aim of this work is to highlight the contribution of operative dentistry in the finishing of orthodontic cases and to present a interdisciplinary approach. After orthodontic treatment, a silicon index of the palatal and incisal surfaces was obtained on the wax-up cast which served as reference for the direct resin composite restorations. The use of the direct resin composite technique has shown to be a predictable and reversible conservative alternative.