ABSTRACT
The effect of application of filters, made of different materials and various thickness, is studied by Monte Carlo calculations using MCNP6.2 code. The calculated data were validated by experimental studies (benchmark tests). Experimental results obtained for YAlO3:Mn high-Z TL detectors irradiated to different standard ISO radiation qualities (X-ray series N-40, N-60, N-80, N-100, N-120, N-150 and N-200 as well as isotopic series S-Cs) modified by various metal (copper and aluminum) filters of thickness of 0.5, 0.8 and 1 mm. The experimental results are compared with results of Monte Carlo simulations done for the same 'radiation-attenuator-detector' combinations and geometry. Obtained results show good consistence between the experimental and calculated data that testifies adequacy of the used calculations and their applicability to modeling of modification of an output from the high-Z detectors exposed to photons of various energies.
Subject(s)
Aluminum , Photons , X-Rays , Radiography , Monte Carlo Method , RadiometryABSTRACT
Zinc gallate (ZnGa2O4) spinel ceramics doped with Mn2+ ions was prepared by a solid-state reaction at 1200 °C in air. Manganese concentration was equal to 0.05 mol.% of MnO with respect to ZnO. Ceramics produced in this way show an efficient green emission at about 505 nm under UV or X-ray excitations, which is caused by Mn2+ ions. This green emission is observed also as a relatively long afterglow (visible to the naked eye in the dark for about one hour) after switching-off the X-ray excitation. Time profiles of the beginning of glow and afterglow have been studied together with thermally stimulated (TSL) and optically stimulated (OSL) luminescence. Experimental results demonstrate a presence of few types of shallow and deep traps responsible for the observed afterglow and TSL/OSL emission of the material. The possibility of pulsed optical stimulation and time-resolved OSL characteristics of ZnGa2O4: Mn2+ has been reported for the first time. The presented results suggest the ZnGa2O4: Mn2+ spinel as a promising material for further fundamental research and possibility of application as a green long-lasting phosphor or storage phosphor for TSL/OSL radiation dosimetry.
ABSTRACT
Method of determining of magnetic moment and size from measurements of dependence of the nonlinear magnetic susceptibility upon magnetic field is proposed, substantiated and tested for superparamagnetic nanoparticles (SPNP) of the "magnetic core-polymer shell" type which are widely used in biomedical technologies. The model of the induction response of the SPNP ensemble on the combined action of the magnetic harmonic excitation field and permanent bias field is built, and the analysis of possible ways to determine the magnetic moment and size of the nanoparticles as well as the parameters of the distribution of these variables is performed. Experimental verification of the proposed method was implemented on samples of SPNP with maghemite core in dry form as well as in colloidal systems. The results have been compared with the data obtained by other methods. Advantages of the proposed method are analyzed and discussed, particularly in terms of its suitability for routine express testing of SPNP for biomedical technology.
ABSTRACT
The work presents experimental results of an in situ investigation of optical absorption of LiNbO(3) : MgO during reducing (95%Ar + 5%H(2)) and oxidizing (O(2)) high-temperature treatments in the temperature range from room temperature to 1073 K. The absorption spectra measured at in situ conditions at high temperatures in reducing/oxidizing atmospheres as well as the kinetics recorded at fixed wavelengths during rapid replacement of gas atmospheres have been analyzed. The origin of the changes in optical absorption caused by the reducing/oxidizing treatments is discussed in terms of hydrogen and oxygen ion diffusion and the point defect structure of the material.
