Management of water-based paint sludge originating from the automotive industry via composting.

Water-based paint sludge generated from the automotive industry is considered a hazardous waste due to its high carbon content and is challenging and costly to manage. This study investigates the management of water-based paint sludge through the composting process, considering its high carbon content. The water-based paint sludge was composted in five separate reactors with the addition of treatment sludge from the same industry as co-substrate and inoculum, as well as sunflower stalks as a bulking agent. The ratio of paint sludge added to the compost mixtures varied between 40% and 80%. The highest temperature was achieved in reactors where industrial sludge was added, and the bulking agent was used at a rate of 20% (R3 and R5). The most efficient composting process was conducted with the addition of 60% water-based paint sludge, 20% treatment sludge, and 20% sunflower stalks (w/w, wet weight basis) (R3). During this process, reductions in organic matter content were observed due to organic matter mineralization, resulting in a decrease in moisture during the maturation phase and consequently reducing waste volumes. The composting process can be a useful tool in addressing the challenges of paint sludge management. Utilizing the composting process not only reduces waste volumes, thereby minimizing environmental impacts, but also offers a sustainable approach to paint sludge management by lowering disposal costs. It is also possible to achieve more effective results by composting paint sludge with different recipes and the use of various bulking agents.Implications: Composting is a method that can be used to achieve stabilization, reduce the quantity, and enable biodrying of water-based paint sludge generated from the automotive industry. In this study, different ratios of paint sludge were mixed with treatment sludge from the same industry as co-substrate and inoculum, while sunflower stalks were added as a bulking agent, and a composting process was conducted. The addition of industrial wastewater treatment sludge and sunflower stalks has increased the efficiency of the paint sludge composting process. In the management of paint sludge, the composting process has emerged as a significant alternative that reduces disposal costs and environmental impacts.

Food loss and waste management in Turkey.

Food waste can be an environmental and economic problem if not managed properly but it can meet various demands of a country if it is considered as a resource. The purpose of this report is to review the existing state of the field in Turkey and identify the potential of food waste as a resource. Food loss and waste (FLW) was examined throughout the food supply chain (FSC) and quantified using the FAO model. Edible FLW was estimated to be approximately 26milliontons/year. The amount of biodegradable waste was estimated based on waste statistics and research conducted on household food waste in Turkey. The total amount of biodegradable waste was found to be approximately 20milliontons/year, where more than 8.6milliontons/year of this waste is FLW from distribution and consumption in the FSC. Options for the end-of-life management of biodegradable wastes are also discussed in this review article.

Composting of wastewater treatment sludge with different bulking agents.

UNLABELLED: The main objectives of this study were to investigate the compostability of wastewater treatment sludge (WTS) containing different bulking agents (BAs) and to determine the most efficient BA. Four different compost trials consisting of mixtures of wheat straw (WS), plane leaf (PL), corncob (CC) and sunflower stalk (SS) with WTS were performed in laboratory reactors. In all experiments, a mixture of 60% WTS and 40% BA (wet basis) was used. The temperature, dry matter (DM), organic matter (OM), pH, electrical conductivity (EC) and C/N ratio were monitored during the composting process. Evaluation of the operational parameters showed that the highest organic matter degradation (i.e. 37.6%), loss of dry matter (i.e. 29.6%) and temperature (i.e. 64 °C) were achieved for the WTS-CC mixtures. Results also showed that the WTS-SS mixture was also successful in terms of these operational parameters. Use of bulking agents for the treatment of wastewater treatment sludge in composting process is an important issue with regards to process efficiency, economy and disposal of agricultural waste. Corncob and sunflower stalk that were previously not used for the composting of WTS from food industry were shown to be highly successful BA materials in this study. IMPLICATIONS: The compostability of wastewater treatment sludge from the food industry with different bulking agents was studied. Wheat straw, plane leaf, corncob, and sunflower stalk were used as bulking agents. The required microbial stabilization and degree of mineralization were achieved with corncobs and sunflower stalks.

Recovery and safer disposal of phosphate coating sludge by solidification/stabilization.

Solidification/stabilization (S/S) of automotive phosphate coating sludge (PS) containing potentially toxic heavy metals was studied. The hazardous characteristics of this waste were assessed according to both Turkish and U.S. Environmental Protection Agency (EPA) regulations for hazardous solid waste. Unconfined compressive strength (UCS) and leaching behavior tests of the solidified/stabilized product were performed. Solidification studies were conducted using Portland cement (PC) as the binder. UCS was found to decrease with increasing waste content. It was found that recovery of the waste for construction applications was possible when the waste content of the mortar was 20% and below, but solidification for safe disposal was achieved only when higher waste concentrations were added. Cu, Cr, Ni, Pb and Zn were found to be significantly immobilized by the solidification/stabilization process. Ni and Zn, which were present at particularly high concentrations (2.281 and 135.318 g/kg respectively) in the PS, had highest the retention levels (94.87% and 98.74%, respectively) in the PC mortars. The organic contaminants and heavy metals present in PS were determined to be immobilized by the S/S process in accordance with the BS 6920 standard. Thus, the potential for hazardous PS waste to adversely impact human health and the environment was effectively eliminated by the S/S procedure. We conclude that S/S-treated PS is safe for disposal in landfills, while recovery of S/S-treated PS constituents remains possible.

Effect of a sulfonated azo dye and sulfanilic acid on nitrogen transformation processes in soil.

Introduction of organic dyes into soil via wastewater and sludge applications has been of increasing concern especially in developing or under-developed countries where appropriate management strategies are scarce. Assessing the response of terrestrial ecosystems to organic dyes and estimating the inhibition concentrations will probably contribute to soil remediation studies in regions affected by the same problem. Hence, an incubation study was conducted in order to investigate the impact of a sulfonated azo dye, Reactive Black 5 (RB5) and sulfanilic acid (SA), a typical representative of aromatic sulfonated amines, on soil nitrogen transformation processes. The results apparently showed that nitrogen related processes in soil can be used as bioindicators of anthropogenic stress caused by organic dyes. It was found that urease activity, arginine ammonification rate, nitrification potential and ammonium oxidising bacteria numbers decreased by 10-20% and 7-28% in the presence of RB5 (> 20 mg/kg dry soil) and SA (> 8 mg/kg dry soil), respectively. Accordingly, it was concluded that organic dye pollution may restrict the nitrogen-use-efficiency of plants, thus further reducing the productivity of terrestrial ecosystems. Furthermore, the response of soil microbiota to SA suggested that inhibition effects of the organic dye may continue after the possible reduction of the parent dye to associated aromatic amines.