Adsorption onto aluminum hydroxide adjuvant protects antigens from degradation.

Aluminum based adjuvants are widely used in commercial vaccines, since they are known to be safe and effective with a variety of antigens. The effect of antigen adsorption onto Aluminum Hydroxide is a complex area, since several mechanisms are involved simultaneously, whose impact is both antigen and formulation conditions dependent. Moreover, the mode of action of Aluminum Hydroxide is itself complex, with many mechanisms operating simultaneously. Within the literature there are contrasting theories regarding the effect of adsorption on antigen integrity and stability, with reports of antigen being stabilized by adsorption onto Aluminum Hydroxide, but also with contrary reports of antigen being destabilized. With the aim to understand the impact of adsorption on three recombinant proteins which, following in vivo immunization, are able to induce functional bactericidal antibodies against Neisseria meningitidis type B, we used a range of physico-chemical tools, such as DSC and UPLC, along with in vitro binding of antibodies that recognize structural elements of the proteins, and supported the in vitro data with in vivo evaluation in mice studies. We showed that, following exposure to accelerated degradation conditions involving heat, the recombinant proteins, although robust, were stabilized by adsorption onto Aluminum Hydroxide and retain their structural integrity unlike the not adsorbed proteins. The measure of the Melting Temperature was a useful tool to compare the behavior of proteins adsorbed and not adsorbed on Aluminum Hydroxide and to predict protein stability.

Multiplex immunoassay for in vitro characterization of acellular pertussis antigens in combination vaccines.

Vaccines characterization is required to ensure physical, chemical, and biological integrity of antigens and adjuvants. Current analytical methods mostly require complete antigen desorption from aluminum-based adjuvants and are not always suitable to distinguish individual antigens in multivalent formulations. Here, Luminex technology is proposed to improve the analytics of vaccine characterization. As proof of concept, TdaP (tetanus, diphtheria and acellular pertussis) combination, adjuvanted with aluminum hydroxide, was chosen as model formulation to quantify and determine the level of adsorption of acellular pertussis (aP) antigens onto adjuvant surface at the same time. The assay used specific antibodies bound to magnetic microspheres presenting unique digital signatures for each pertussis antigen, allowing the simultaneous recognition of respective antigens in the whole vaccine, avoiding laborious procedures for adjuvant separation. Accurate and reproducible quantification of aP antigens in TdaP vaccine has been achieved in the range 0.78-50 ng/mL, providing simultaneously information on antigen identity, quantity, and degree of adsorption to aluminum hydroxide. The current study could further be considered as a model to set up in vitro potency assays thus supporting the replacement of animal tests accordingly to the 3Rs concept.

The development of self-emulsifying oil-in-water emulsion adjuvant and an evaluation of the impact of droplet size on performance.

Microfluidization is an established technique for preparing emulsion adjuvant formulations for use in vaccines. Although this technique reproducibly yields high-quality stable emulsions, it is complex, expensive, and requires proprietary equipment. For this study, we developed a novel and simple low shear process to prepare stable reproducible emulsions without the use of any proprietary equipment. We found this process can produce a wide range of differently sized emulsions based on the modification of ratios of oil and surfactants. Using this process, we prepared a novel 20-nm-sized emulsion that was stable, reproducible, and showed adjuvant effects. During evaluation of this emulsion, we studied a range of emulsions with the same composition all sized below 200; 20, 90, and 160 nm in vivo and established a correlation between adjuvant size and immune responses. Our studies indicate that 160-nm-sized emulsions generate the strongest immune responses.

MF59 oil-in-water emulsion in combination with a synthetic TLR4 agonist (E6020) is a potent adjuvant for a combination Meningococcus vaccine.

The inclusion of a potent TLR4 immune potentiator to a recombinant antigen vaccine formulation enhances both the magnitude and the breadth of the engendered immune response. One such immune potentiator (TLR4 agonist E6020) was evaluated with recombinant Men B antigens delivered in MF59 sub-micron adjuvant emulsion. The ability of this formulation to enhance serum antibody and bactercidal titers was investigated. The co-delivery of E6020 within MF59 enhanced both the serum and bactericidal titers for Men B antigens and for Men B antigens combined with Men ACWY-CRM conjugate vaccine. The delivery of TLR4 agonist within MF59 emulsion oil droplets leads to a more potent response in comparison to the TLR4 when admixed with MF59 emulsion.

Flow cytometry: an alternative method for direct quantification of antigens adsorbed to aluminum hydroxide adjuvant.

Flow cytometry (FC) has been widely used in biological research; however, its use for vaccine characterization has been very limited. Here we describe the development of an FC method for the direct quantification of two Neisseria meningitidis vaccine antigens, in mono- and multivalent formulations, while still adsorbed on aluminum hydroxide (AH) suspension. The antibody-based method is specific and sensitive. Because FC allows microscopic particle examination, the entire aluminum suspension carrying adsorbed antigen(s) can be analyzed directly. In addition to determining antigen concentration and identity, the assay is able to determine the distribution of the antigens on AH. High correlation coefficients (r(2)) were routinely achieved for a broad range of antigen doses from 0 to 150 µg/dose. Traditional assays for quantitative and qualitative antigen characterization on AH particles involve either complete aluminum dissolution or antigen desorption from the adjuvant. Because our direct method uses the whole AH suspension, the cumbersome steps used by traditional methods are not required. Those steps are often inefficient in desorbing the antigens and in some cases can lead to protein denaturation. We believe that this novel FC-based assay could circumvent some of the complex and tedious antigen-adjuvant desorption methods.

Immunogenicity of a meningococcal native outer membrane vesicle vaccine with attenuated endotoxin and over-expressed factor H binding protein in infant rhesus monkeys.

We previously investigated immunogenicity of meningococcal native outer membrane vesicle (NOMV) vaccines prepared from recombinant strains with attenuated endotoxin (ΔLpxL1) and over-expressed factor H binding protein (fHbp) in a mouse model. The vaccines elicited broad serum bactericidal antibody responses. While human toll-like receptor 4 (TLR-4) is mainly stimulated by wildtype meningococcal endotoxin, mouse TLR-4 is stimulated by both the wildtype and mutant endotoxin. An adjuvant effect in mice of the mutant endotoxin would be expected to be much less in humans, and may have contributed to the broad mouse bactericidal responses. Here we show that as previously reported for humans, rhesus primate peripheral blood mononuclear cells incubated with a NOMV vaccine from ΔLpxL1 recombinant strains had lower proinflammatory cytokine responses than with a control wildtype NOMV vaccine. The cytokine responses to the mutant vaccine were similar to those elicited by a detergent-treated, wildtype outer membrane vesicle vaccine that had been safely administered to humans. Monkeys (N=4) were immunized beginning at ages 2-3 months with three doses of a NOMV vaccine prepared from ΔLpxL1 recombinant strains with over-expressed fHbp in the variant 1 and 2 groups. The mutant NOMV vaccine elicited serum bactericidal titers≥1:4 against all 10 genetically diverse strains tested, including 9 with heterologous PorA to those in the vaccine. Negative-control animals had serum bactericidal titers<1:4. Thus, the mutant NOMV vaccine elicited broadly protective serum antibodies in a non-human infant primate model that is more relevant for predicting human antibody responses than mice.

A comparison of anionic nanoparticles and microparticles as vaccine delivery systems.

The objective of this work was to conduct an in vivo comparison of nanoparticles and microparticles as vaccine delivery systems. Poly (lactide-co-glycolide) (PLG) polymers were used to create nanoparticles size 110 nm and microparticles of size 800-900 nm. Protein antigens were then adsorbed to these particles. The efficacy of these delivery systems was tested with two protein antigens. A recombinant antigen from Neisseria meningitides type B (MenB) was administered intramuscularly (i.m.) or intraperitonealy (i.p.). An antigen from HIV-1, env glycoprotein gp140 was administered intranasally (i.n.) followed by an i.m. boost. From three studies, there were no differences between the nanoparticles and micro-particles formulations. Both particles led to comparable immune responses in mice. The immune responses for MenB (serum bactericidal activity and antibody titers) were equivalent to the control of aluminum hydroxide. For the gp140, the LTK63 was necessary for high titers. Both nanoparticles and microparticles are promising delivery systems.

Combination adjuvants for the induction of potent, long-lasting antibody and T-cell responses to influenza vaccine in mice.

Influenza is controlled by protective titres of neutralizing antibodies, induced with the help of CD4 T-cells, and by antiviral T-cell effector function. Adjuvants are essential for the efficient vaccination of a naïve population against avian influenza. We evaluated a range of adjuvants for their ability to enhance, in naïve mice, protective hemagglutination inhibition (HI) titres, which represent the generally accepted correlate of protection, virus-neutralizing titres and T-cell responses to a new generation influenza vaccine produced in cell culture. The selected adjuvants include alum, calcium phosphate (CAP), MF59, the delivery system poly-(lactide co-glycolide) (PLG) and the immune potentiator CpG. MF59 was clearly the most potent single adjuvant and induced significantly enhanced, long-lasting HI and neutralizing titres and T-cell responses in comparison to all alternatives. The combination of alum, MF59, CAP or PLG with CpG generally induced slightly more potent titres. The addition of CpG to MF59 also induced a more potent Th1 cellular immune response, represented by higher IgG2a titres and the induction of a strongly enhanced IFN-gamma response in splenocytes from immunized mice. These observations have significant implications for the development of new and improved flu vaccines against pandemic and inter-pandemic influenza virus strains.

Characterization of antigens adsorbed to anionic PLG microparticles by XPS and TOF-SIMS.

The chemical composition of the surface of anionic PLG microparticles before and after adsorption of vaccine antigens was measured using X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (TOF-SIMS). The interfacial distributions of components will reflect underlying interactions that govern properties such as adsorption, release, and stability of proteins in microparticle vaccine delivery systems. Poly(lactide-co-glycolide) microparticles were prepared by a w/o/w emulsification method in the presence of the anionic surfactant dioctyl sodium sulfosuccinate (DSS). Ovalbumin, lysozyme, a recombinant HIV envelope glyocoprotein and a Neisseria meningitidis B protein were adsorbed to the PLG microparticles, with XPS and time-of-flight secondary mass used to analyze elemental and molecular distributions of components of the surface of lyophilized products. Protein (antigen) binding to PLG microparticles was measured directly by distinct elemental and molecular spectroscopic signatures consistent with amino acids and excipient species. The surface sensitive composition of proteins also included counter ions that support the importance of electrostatic interactions being crucial in the mechanism of adsorptions. The protein binding capacity was consistent with the available surface area and the interpretation of previous electron and atomic force microscope images strengthened by the quantification possible by XPS and the qualitative identification possible with TOF-SIMS. Protein antigens were detected and quantified on the surface of anionic PLG microparticles with varying degrees of efficiency under different adsorption conditions such as surfactant level, pH, and ionic strength. Observable changes in elemental and molecular composition suggest an efficient electrostatic interaction creating a composite surface layer that mediates antigen binding and release.

The potency of the adjuvant, CpG oligos, is enhanced by encapsulation in PLG microparticles.

The objective of this work was to evaluate the potency of the CpG containing oligonucleotide encapsulated within poly(lactide-co-glycolide), and coadministered with antigen adsorbed to poly(lactide-co-glycolide) microparticles (PLG particles). The formulations evaluated include, CpG added in soluble form, CpG adsorbed, and CpG encapsulated. The antigen from Neisseria meningitidis serotype B (Men B) was used in these studies. The immunogenicity of these formulations was evaluated in mice. Poly(lactide-co-glycolide) microparticles were synthesized by a w/o/w emulsification method in the presence of a charged surfactant for the formulations. Neisseria meningitidis B protein was adsorbed to the PLG microparticles, with binding efficiency and initial release measured. CpG was either added in the soluble or adsorbed or encapsulated form based on the type of formulation. The binding efficiency, loading, integrity and initial release of CpG and the antigen were measured from all the formulations. The formulations were then tested in mice for their ability to elicit antibodies, bactericidal activity and T cell responses. Encapsulating CpG within PLG microparticles induced statistically significant higher antibody, bactericidal activity and T cell responses when compared to the traditional method of delivering CpG in the soluble form.

A modified process for preparing cationic polylactide-co-glycolide microparticles with adsorbed DNA.

We have previously shown that cationic polylactide-co-glycolide (PLG) microparticles can be effectively used to adsorb DNA and generate potent immune responses in vivo. We now describe a modified and easier process containing a single lyophilization step to prepare these cationic PLG microparticles with adsorbed DNA. Cationic PLG microparticle formulations with adsorbed DNA were prepared using a modified solvent evaporation technique. Formulations with a fixed CTAB content and DNA load were prepared. The loading efficiency and 24h DNA release was evaluated for each formulation and compared to the earlier method of preparation. Select formulations were tested in vivo. The modified cationic PLG microparticle preparation method with a single lyophilization step, showed comparable physico-chemical behaviour to the two lyophilization steps process and induced comparable immune. The modified process with a single lyophilization step is a more practical process and can be utlized to prepare cationic PLG microparticles with adsorbed DNA on a large scale.

A practical approach to the use of nanoparticles for vaccine delivery.

The objective of this work was to obtain a nanoparticle formulation that could be sterile filtered, lyophilized, and resuspended to the initial size with excipients appropriate for use as a vaccine formulation. Poly(lactide-co-glycolide) (PLG) polymers were used to create nanoparticles ranging in size from 110 to 230 nm. Protein antigens were adsorbed to the particles; the protein-nanoparticles were then lyophilized with the excipients. Vaccine compatible excipient combinations of sugars alone, surfactants alone, and sugars and surfactants were tested to find conditions where initial particle size was recovered. Sterile filtration of smaller nanoparticles led to minimal PLG losses and allowed the particle preparation to be a nonaseptic process. We found that the smaller nanoparticles of size approximately 120 nm required higher surfactant concentration to resuspend postlyophilization than slightly larger ( approximately 220 nm) particles. To resuspend 120 nm nanoparticles formulations of poly(vinyl alcohol) (PVA) with sucrose/mannitol or dioctyl sodium sulfosuccinate (DSS) with trehalose/mannitol were sufficient. The protein-nanoparticles resuspension with the same excipients was dependent on the protein and protein loading level. The nanoparticle formulations in vivo were either similar or had enhanced immunogenicity compared to aluminum hydroxide formulations. A lyophilized nanoparticle formulation with adsorbed protein antigen and minimal excipients is an effective vaccine delivery system.

Polylactide-co-glycolide microparticles with surface adsorbed antigens as vaccine delivery systems.

Several groups have shown that vaccine antigens can be encapsulated within polymeric microparticles and can serve as potent antigen delivery systems. We have recently shown that an alternative approach involving charged polylactide co-glycolide (PLG) microparticles with surface adsorbed antigen(s) can also be used to deliver antigen into antigen presenting cell (APC). We have described the preparation of cationic and anionic PLG microparticles which have been used to adsorb a variety of agents, which include plasmid DNA, recombinant proteins and adjuvant active oligonucleotides. These PLG microparticles were prepared using a w/o/w solvent evaporation process in the presence of the anionic surfactants, including DSS (dioctyl sodium sulfosuccinate) or cationic surfactants, including CTAB (hexadecyl trimethyl ammonium bromide). Antigen binding to the charged PLG microparticles was influenced by several factors including electrostatic and hydrophobic interactions. These microparticle based formulations resulted in the induction of significantly enhanced immune responses in comparison to alum. The surface adsorbed microparticle formulation offers an alternative and novel way of delivering antigens in a vaccine formulation.

Encapsulation of the immune potentiators MPL and RC529 in PLG microparticles enhances their potency.

PURPOSE: Monophosphoryl lipid A (MPL) and the synthetic LPS mimetic RC529, encapsulated in poly(lactide-co-glycolide) (PLG) microparticles, were evaluated as immune potentiators in the presence of either HIV-1 gp120 protein or antigen from Neisseria meningitidis serotype B (Men B). The immunogenicity of these formulations was evaluated in mice and compared to CpG containing oligonucleotide. This work was done as part of an ongoing effort to enhance the potency of vaccine candidates against HIV and Men B. METHODS: Microparticles were made by a solvent evaporation method. Blank microparticles as well as microparticles with encapsulated MPL or RC529 were made using the PLG polymer RG503 and the ionic surfactant Dioctylsulfosuccinate by the water-in-oil-in-water emulsion technique. Antigens from HIV-1 and Men B were adsorbed on the surface of these anionic microparticles and the final formulations characterized for protein loading, release, and integrity. The formulations were then tested in mice for their ability to elicit antibodies and bactericidal activity in comparison with CpG containing oligonucleotide. RESULTS: We have found that adding soluble immune potentiators to Men B antigen formulated on PLG microparticles significantly enhanced the immune response to a level comparable to that obtained using CpG. In a separate study, we found that encapsulating MPL or RC529 in PLG microparticles further enhanced the response in comparison to soluble CpG, which is our control group. Similarly, adding soluble immune potentiators to gp120 antigen formulated on PLG microparticles resulted in a significant enhancement of the immune response. Moreover, delivering MPL or RC529 encapsulated in PLG microparticles with gp120 adsorbed on PLG microparticles, resulted in even further enhancement of serum titers over those obtained with soluble immune potentiators. These titers were comparable to or greater than those obtained with soluble CpG, the control group. This effect was observed for both antigens regardless of whether or not the immune potentiator and the antigen were used with the same or with separate particles. In conclusion, the advantages of encapsulating MPL and RC529 lie not only in the enhanced immune response they elicit, but also in the convenience of handling these relatively insoluble compounds, and flexibility in vaccine design. The fact that MPL and RC529 are readily soluble in methylene chloride used for the manufacturing of PLG microparticles makes it easy to avoid solubility issues. Moreover, formulating antigen and immune potentiator with the same particle offers an attractive approach to vaccine delivery.

A preliminary evaluation of alternative adjuvants to alum using a range of established and new generation vaccine antigens.

Although alum is the most commonly used vaccine adjuvant, it has some limitations for use with the next generation recombinant antigens. We explored the use of alternative adjuvant formulations (poly lactide co-glycolide (PLG) microparticles, MF59 emulsion, CAP and l-tyrosine suspension) in comparison with five different vaccine antigens--namely, diphtheria toxoid (DT), tetanus toxoid (TT), HBsAg, Men C conjugate and MB1. The results indicated that although alum was optimal for bacterial toxoid based vaccines, it was not highly potent for MB1, Men C or HBsAg antigens. MF59 emulsion stood out as a good alternative to alum for TT, HBsAg, MB1 and Men C vaccines. On the other hand l-tyrosine suspension and CAP did not enhance immune responses over alum with most antigens. PLG microparticles were comparable or better than alum with both MB1 and Men C conjugate vaccine. The study indicates that it is possible to replace alum with other adjuvant formulations like MF59 and PLG and maintain and/or improve immune responses with some vaccine antigens.

An investigation of the factors controlling the adsorption of protein antigens to anionic PLG microparticles.

This work examines physico-chemical properties influencing protein adsorption to anionic PLG microparticles and demonstrates the ability to bind and release vaccine antigens over a range of loads, pH values, and ionic strengths. Poly(lactide-co-glycolide) microparticles were synthesized by a w/o/w emulsification method in the presence of the anionic surfactant DSS (dioctyl sodium sulfosuccinate). Ovalbumin (OVA), carbonic anhydrase (CAN), lysozyme (LYZ), lactic acid dehydrogenase, bovine serum albumin (BSA), an HIV envelope glyocoprotein, and a Neisseria meningitidis B protein were adsorbed to the PLG microparticles, with binding efficiency, initial release and zeta potentials measured. Protein (antigen) binding to PLG microparticles was influenced by both electrostatic interaction and other mechanisms such as van der Waals forces. The protein binding capacity was directly proportional to the available surface area and may have a practical upper limit imposed by the formation of a complete protein monolayer as suggested by AFM images. The protein affinity for the PLG surface depended strongly on the isoelectric point (pI) and electrostatic forces, but also showed contributions from nonCoulombic interactions. Protein antigens were adsorbed on anionic PLG microparticles with varying degrees of efficiency under different conditions such as pH and ionic strength. Observable changes in zeta potentials and morphology suggest the formation of a surface monolayer. Antigen binding and release occur through a combination of electrostatic and van der Waals interactions occurring at the polymer-solution interface.

Enhanced potency of plasmid DNA microparticle human immunodeficiency virus vaccines in rhesus macaques by using a priming-boosting regimen with recombinant proteins.

DNA vaccines have been used widely in experimental primate models of human immunodeficiency virus (HIV), but their effectiveness has been limited. In this study, we evaluated three technologies for increasing the potency of DNA vaccines in rhesus macaques. These included DNA encoding Sindbis virus RNA replicons (pSINCP), cationic poly(lactide-co-glycolide) (PLG) microparticles for DNA delivery, and recombinant protein boosting. The DNA-based pSINCP replicon vaccines encoding HIV Gag and Env were approximately equal in potency to human cytomegalovirus (CMV) promoter-driven conventional DNA vaccines (pCMV). The PLG microparticle DNA delivery system was particularly effective at enhancing antibody responses induced by both pCMV and pSINCP vaccines and had less effect on T cells. Recombinant Gag and Env protein boosting elicited rapid and strong recall responses, in some cases to levels exceeding those seen after DNA or DNA/PLG priming. Of note, Env protein boosting induced serum-neutralizing antibodies and increased frequencies of gamma interferon-producing CD4 T cells severalfold. Thus, PLG microparticles are an effective means of delivering DNA vaccines in nonhuman primates, as demonstrated for two different types of DNA vaccines encoding two different antigens, and are compatible for use with DNA prime-protein boost regimens.

Mucosal and systemic anti-HIV responses in rhesus macaques following combinations of intranasal and parenteral immunizations.

There is an urgent need to develop vaccines that can elicit immunological memory responses against HIV. Using the rhesus macaque model and a combination of intranasal (IN) and parenteral immunizations with DNA or protein adsorbed to microparticles or mixed with mucosal adjuvants we sought to induce anti-HIV memory-type immune responses in both the mucosal and systemic compartments. Prime/boost immunizations were performed through five IN immunizations alone with HIV-env oligomeric gp140 (Ogp140) or HIV-gag-p24 mixed with Escherichia coli heat labile-derived mutant adjuvants or two parenteral immunizations with DNA encoding HIV-env or -gag adsorbed to microparticles followed by three IN immunizations with p24 gag protein and the mutant adjuvants. Both modes of immunizations induced anti-gp140 plasma and vaginal IgG and IgA as well as interferon (IFN)-gamma secreting peripheral blood mononuclear cells (PBMC) after HIV-env and -gag peptide restimulation. After a resting period of 4 months, when the levels of humoral and cellular responses had decreased, intramuscular (IM) booster immunizations with p55-gag protein adsorbed to microparticles and Ogp140 in MF59 oil in water emulsion significantly enhanced anti-HIV plasma and vaginal antibody, as well as peripheral blood IFN-gamma responses in all groups of vaccinated macaques. Importantly, plasma neutralization activity against both homologous and heterologous HIV strains was observed in all groups following the IM booster immunizations with protein. These findings show that IN priming alone or combinations of parenteral and IN immunizations followed by IM booster immunizations hold promise to significantly enhance mucosal and systemic memory-type immune responses against HIV-1 antigens.

Cationic microparticles are a potent delivery system for a HCV DNA vaccine.

We initially evaluated in mice the ability of naked DNA encoding intracellular forms of the E1E2 envelope proteins from HCV to induce antibody responses and compared the responses induced with the same plasmid adsorbed onto cationic poly (lactide co-glycolide) (PLG) microparticles. Although naked DNA was only able to induce detectable responses at the 100 microg dose level, making this approach impractical for evaluation in larger animals, PLG/DNA induced detectable responses at 10 microg. In addition, the PLG/DNA microparticles induced significantly enhanced responses to naked DNA when compared at the same dose level. Remarkably, PLG/DNA induced comparable responses to recombinant E1E2 protein adjuvanted with the emulsion MF59. Furthermore, PLG/DNA effectively primed for a booster response with protein immunization, while naked DNA did not. Therefore, PLG/DNA was selected for further evaluation in a non-human primate model. In a study in rhesus macaques, PLG/DNA induced seroconversion in 3/3 animals following three immunizations. Although the antibody responses appeared lower than those induced with recombinant protein adjuvanted with MF59, following a fourth dose, PLG/DNA and protein induced comparable responses. However, a single booster dose of recombinant protein administered to the animals previously immunized with PLG/DNA induced much higher responses. In addition, one of three animals immunized with PLG/DNA showed a cytotoxic T lymphocyte response in peripheral blood lymphocytes. In conclusion, cationic PLG microparticles with adsorbed HCV DNA generates potent immune responses.

Charged polylactide co-glycolide microparticles as antigen delivery systems.

Polymeric microparticles with encapsulated antigens have become well-established in the last decade as potent antigen delivery systems and adjuvants, with experience being reported from many groups. However, the authors have recently shown that an alternative approach involving charged polylactide co-glycolide (PLG) microparticles with surface adsorbed antigen(s) can also be used to deliver antigen into antigen-presenting cell populations. The authors have described the preparation of cationic and anionic PLG microparticles that have been used to adsorb a variety of agents, to include plasmid DNA, recombinant proteins and adjuvant active oligonucleotides. These novel PLG microparticles were prepared using a w/o/w solvent evaporation process in the presence of the anionic surfactants, such as dioctyl sodium sulfosuccinate, or cationic surfactants, such as hexadecyl trimethyl ammonium bromide. Antigen binding to the charged PLG microparticles was influenced by both electrostatic interaction and other mechanisms, including hydrophobic interactions. Adsorption of antigens to microparticles resulted in the induction of significantly enhanced immune responses in comparison with alternative approaches. The surface adsorbed microparticle formulation offers an alternative way of delivering antigens as a vaccine formulation.