Acute effects of exposure to air contaminants in a sawmill on healthy volunteers.

OBJECTIVES: To study whether air contaminants in sawmills can induce acute changes in the upper and lower airways of previously non-exposed subjects. METHODS: Nineteen healthy volunteers were examined to find the concentration of interleukin 6 (IL-6) in nasal lavage fluid and lung function before and after five hour exposure to dusts and fumes generated in a sawmill where timber from Scots pine was sawed. When exposed, the subjects had respirators with and without a particle filter. RESULTS: The median for daily time weighted average concentration of total dust for subjects with respirators without a filter was 0.13 mg/m3, which was significantly higher than the median of 0.04 mg/m3 for subjects who had respirators with a filter. The median for the concentration of IL-6 in the nasal lavage fluid increased after exposure from 0.5 to 5.9 pg/ml in subjects with respirators without a particle filter (P < 0.05). The increase of the concentration of IL-6 was significantly correlated with the dust concentration. A decrease in transfer factor of the lung was significantly correlated with daily time weighted average concentrations of terpenes. CONCLUSION: The findings suggest that healthy volunteers, exposed to air contaminants in a sawmill, show a slight inflammatory reaction. Also, the results of the study indicate the importance of decreasing the concentrations of wood dust in the work environment.

An Indicator for Assessing Respirable Soot Particles in Diesel Exhaust during Occupational Exposures.

Both acute and chronic impairments of lung function have been demonstrated in humans after exposure to diesel exhaust. The concentration of soot particles in the diesel exhaust is significantly related to its effects on health. The aim of the present analysis was to study the relationship between the concentration of respirable dust as an indicator of exposure to soot particles in diesel exhaust and a biologic exposure indicator variable, i.e., transient lung function decrease. Daily time-weighted average concentrations of carbon monoxide and nitrogen dioxide amounted to 9 % and 25% of the applicable hygienic limit values. Time-weighted average concentration and the proportion of respirable dust in total dust during a workshift were significantly correlated with across-shift decreases in lung function. In the absence of a suitable measure for total diesel exhaust exposure, the ratio of the proportion of respirable dust in total dust in a workplace may serve as an indicator of the concentration of soot particles in diesel exhaust.

Effects within the week on forced vital capacity are correlated with long term changes in pulmonary function: reanalysis of studies on car painters exposed to isocyanate.

OBJECTIVES: To examine if car painters who work with polyurethane paints that contain hexamethylenediisocyanate (HDI) and hexamethylenediisocyanate biuret trimer (HDI-BT) develop acute as well as chronic impairment of lung function. METHODS: In this study data were reanalysed from two earlier studies on a group of car painters to see if a decrease in lung function within the week is a marker of vulnerability in those workers. Data on changes in forced vital capacity (FVC) and forced expiratory volume in one second (FEV1) within the week were available for 20 car painters who were also examined six years later. RESULTS: 10 men showed a decline in FVC within the week. There were no significant differences in age, duration of employment, exposures during the follow up period, or smoking between car painters who had decline in lung function within the week and car painters who had not. A significant correlation was found between the change in FVC within the week and the long term (six year) change in FVC, standardised for the effects of aging and smoking, and adjusted for the number of peak exposures. CONCLUSIONS: The results suggest that the decrease in FVC within the week might serve as a guide to identify car painters at risk of a further decrement in lung function above the effects of aging, smoking, and exposure.

Experimental evaluation of the effect of filtration of diesel exhaust by biologic exposure indicators.

The airway resistance, compliance of the respiratory system, transfer factor, and alveolar volume of 33 healthy rabbits were studied before and after exposure to diluted diesel exhaust generated in an experimental motor. Three diesel fuels and two particle traps were tested. Subsequent to the post-exposure lung function measurements, the animals were sacrificed and the lungs were processed for morphologic examination. The concentrations of particles, nitrogen dioxide, and formaldehyde were measured. The inflammatory airway changes were most pronounced in animals exposed to exhaust from standard fuel. Small changes were identified in animals exposed to exhaust filtered through the catalytic trap as well or exposed to unfiltered exhaust from fuels intended for densely built-up areas. Increase in compliance of the respiratory system was associated with the concentration of soot particles and formaldehyde. Compliance decreased significantly in animals exposed to exhaust from standard fuel filtered through the particle traps and increased almost significantly in animals exposed to unfiltered exhaust from the same fuel.

Acute effects on forced expiratory volume in one second and longitudinal change in pulmonary function among wood trimmers.

Wood trimmers are exposed to molds that periodically grow on timber, and may develop acute as well as chronic pulmonary function impairment. This study examined whether these acute changes in pulmonary function are predictors for a longitudinal deterioration in pulmonary function, beyond normal aging and exposure. Across-shift changes in pulmonary function, measured during a working week, were evaluated in 15 wood trimmers with a follow-up time of 27 months. Twenty-six sawmill workers, employed at the same plants as the wood trimmers, served as control subjects. The highest concentration of viable mold spores for the wood trimmers was 10(6) colony-forming units (cfu)/m3, i.e., several times higher than the corresponding value for the sawmill workers. At the follow-up, wood trimmers had a lower forced vital capacity (FVC) on average, after adjustment for age and height, compared to the sawmill workers. In addition, a correlation was found between the across-week change in forced expiratory volume in 1 second (FEV1) and the decline in FEV1 between the first and the second occasion, after adjusting for normal aging in nonsmoking wood trimmers (r2 = 84%, p < 0.001). The results from the present study suggest that across-shift decrease in FEV1 (measured during a working week) might serve as a guide to identify subjects being at risk for a further decrement in pulmonary function over and above the effects of normal aging and exposure to mold spores in the wood trimming department.

Temporary health effects from exposure to water-borne paints.

Temporary health effects of exposure to experimental paints were studied. Ten painters feeling nuisance from water-borne paints and eight painters not feeling such nuisance applied eight experimental water-borne paints according to normal work routines. The effects were a decrease in forced vital capacity, forced expiratory volume in 1 s and peak expiratory flow, an increase in urine excretion, and a decrease in urine density. A small, but statistically highly significant, increase in the mean volume of erythrocytes was observed. The effects were similar in the two groups, but the "nuisance group" reacted with a larger urine excretion and a larger increase in the mean volume of erythrocytes. The effects did not influence physical work capacity. The effects on the lungs and urinary excretion were probably not associated with the organic solvents or ammonia in the paints. Instead, they were probably due to derivatives of isothiazolinone. This assumption needs verification.

Lung function and precipitating antibodies in low exposed wood trimmers in Sweden.

Wood trimmers are exposed to molds that periodically grow on timber that may induce alveolitis and obstructive lung disease. We have evaluated respiratory symptoms, bronchial reactivity, and lung function in 28 wood trimmers at a Swedish sawmill and in 19 unexposed office workers. Eleven (sero-positive) of the wood trimmers had precipitating antibodies in peripheral blood against one or several molds. The exposure to dust (median 0.26 mg/m3), viable mold spores (median 2950 cfu/m3), viable bacteria (median 370 cfu/m3), airborne endotoxins (range 0.0015-0.0025 microgram/m3), and terpenes (range 0.4-23 mg/m3) was lower than levels that earlier have been reported to affect lung function. The wood trimmers reported an increased prevalence of cough and breathlessness. They also showed signs of a mild obstructive impairment with a tendency to increase bronchial sensitivity to metacholine and decreased FEV1 after 2 days free from exposure. FEV1 decreased more during the working week in the sero-positive workers than among the sero-negative workers, and for the whole group the decrease in FEV1 and MEF25 was correlated to the degree of mold exposure.

Validation of exposure information in occupational epidemiology.

Exposure data may be inadequate mainly for two reasons; they may not comply with a reasonable exposure-effect model or they may be biased. In the use of historical data it is essential to keep track of what the data were supposed to mean when collected in the first place. Most measurements of air contaminants in work places are probably carried out to establish compliance or non-compliance with limit values. Sometimes measurements are also made to evaluate control measures. Unfortunately, measurement data acquired in this way may have very little to do with the true average exposure of employees. The influence of trends and variations in production on the exposure level is substantial. This influence is similar and coincidental in widely different industries. In addition the variations attributed to production levels, there can be important variations due to season.

Impeded lung function in moulders and coremakers handling furan resin sand.

A total of 39 moulders and coremakers exposed to furan resin sand and 27 unexposed local controls were examined by lung-function tests before and after a work shift. In all, 28 of the subjects exposed to furan resin sand and the control group were evaluated by dynamic spirometry and nitrogen washout. The remaining 11 subjects exposed to furan resin sand were studied using both static and dynamic spirometry and the CO single-breath technique. The time-weighted average exposure to furfuryl alcohol was about 7 mg/m3, with peak values exceeding the present Swedish short-term exposure limit (40 mg/m3). The exposure to respirable dust and formaldehyde as time-weighted over the shift was less than 2 mg/m3 and 0.4 mg/m3, respectively, in all groups. During the work shift studied, the 28 exposed subjects had more complaints of airway symptoms than did the controls, showing an average decrease of 0.21 in forced vital capacity but no fall in any other lung-function variable. The remaining 11 exposed subjects demonstrated a post-shift decrease in total lung capacity. The results indicate an acute restrictiveness induced by exposure to furan resin sand, but the underlying mechanism is unclear. Chronic impairment of lung function was not observed.

Pulmonary function in workers exposed to diesel exhausts: the effect of control measures.

To assess the protective effect of exhausts pipe filters or respirators on pulmonary function, 15 workers in a tunnel construction site, truck and loading machine drivers, rock workers, and others were studied. The total and respirable dust, combustible matter in respirable dust, carbon monoxide, nitrogen monoxide and nitrogen dioxide were measured for each subject during entire work shifts. The effect of the exposure on the lung function variables was measured by dynamic spirometry, carbon monoxide single breath technique, and nitrogen single breath wash-out. The exhaust pipe filtering had a protective effect, directly discernible in the drivers on vital capacity and FEV1.0 and for the whole group on FEV% and TLco. The dust respirators had no effect, probably because of the difficulties in correctly using personal protection under the circumstances in the tunnel. In the absence of a true exposure assessment, control measures for diesel exhausts can be tested by medical effect studies. Catalytic particle filters of diesel exhausts are one method of rendering the emissions less irritant, although they will not remove irritant gases. An indicator of diesel exhaust exposure should include the particle fraction of the diesel exhausts, but a discrimination between different sources of organic dust must be possible.

Reduction in adverse effect on pulmonary function after exposure to filtered diesel exhaust.

A statistically significant temporary reduction on pulmonary function was measured with spirometry in stevedores on a roll-on-roll-off ro-ro ship who were exposed to diesel exhausts from trucks during a work shift. When all trucks were equipped with specially designed microfilters mounted on the exhaust pipes, this impairment in pulmonary function was reduced. Removal of the particulate fraction of the exhausts by filtering is an important factor in reducing the adverse effect of diesel exhaust on pulmonary function. The particle fraction should be considered when designing an indicator of the biological effects of diesel exhausts.

Effects of exposure to vehicle exhaust on health.

Exposure to combustion engine exhaust and its effect on crews of roll-on roll-off ships and car ferries and on bus garage staff were studied. The peak concentrations recorded for some of the substances studied were as follows: total particulates (diesel only) 1.0 mg/m3, benzene (diesel) 0.3 mg/m3, formaldehyde (gasoline and diesel) 0.8 mg/m3, and nitrogen dioxide (diesel) 1.2 mg/m3. The highest observed concentration of benzo(a)pyrene was 30 ng/m3 from gasoline and diesel exhaust. In an experimental study volunteers were exposed to diesel exhaust diluted with air to achieve a nitrogen dioxide concentration of 3.8 mg/m3. Pulmonary function was affected during a workday of occupational exposure to engine emissions, but it normalized after a few days with no exposure. The impairment of pulmonary function was judged to have no appreciable, adverse, short-term impact on individual work capacity. In the experimental exposure study, no effect on pulmonary function was observed. Analyses of urinary mutagenicity and thioether excretion showed no sign of exposure to genotoxic compounds among the occupationally exposed workers or among the subjects in the experimental study.

Assessment of concentration peaks in setting exposure limits for air contaminants at workplaces, with special emphasis on narcotic and irritative gases and vapors.

In various countries, concentration peaks of gaseous air contamination are assessed by a standard formula. Toxicologic data are not sufficient to warrant occupational short-term exposure limits for the majority of substances. In this article the literature on exposure to concentration peaks is reviewed, and the problem is analyzed from general toxicokinetic and physicochemical points of view. Several ways are suggested to achieve better standards. One straightforward and reasonably simple method is summarized in the following three points, which should be considered in the setting of occupational exposure limits: (i) For substances with fast or moderately fast action, only ceiling limits should be considered; (ii) when structure analogy is justified for narcotic and irritating gases, the correct way is to set the limits at the same thermodynamic activity (relative saturation) of the substances in question and not at the same concentration; (iii) for substances absorbed and eliminated slowly time-weighted exposure limits, combined with rules for excursions, or short-term exposure limits derived from such rules are appropriate, but the possible accumulation of large absolute quantities of the substances should be considered. This point is particularly important when the critical effect is narcosis or irritation, as the thermodynamic equipotency means that the effective concentration of water-soluble gases and vapors is higher than that of substances with low water solubility.

Respiratory symptoms and pulmonary function among welders working with aluminum, stainless steel and railroad tracks.

Sixty-four aluminum welders, 46 stainless steel welders, and 149 railroad track welders were investigated regarding respiratory symptoms and pulmonary function (forced vital capacity and forced expiratory volume in 1 s). Referents consisted of nonwelding industrial workers and railroad workers. All groups of welders showed a higher frequency of chronic bronchitis symptoms than their respective referents. Respiratory symptoms were related to ozone concentrations in welders working with aluminum. In stainless steel and railroad track welders respiratory symptoms were related to chromium exposure rather than to total particle exposure. The pulmonary function was not affected in any of the welding groups studied.

Limitations to the use of employee exposure data on air contaminants in epidemiologic studies.

The bias in the estimation of uptake of substances in the human body from exposure data gathered from ordinary workplace check-ups is discussed. It is concluded that most exposure is probably overrated. This means that exposure limits based on these premises will tend to be too high. To counteract this bias in the future, filed exposure data should be accompanied with information on a number of circumstances which prevailed at the sampling.

Urine chromium as an estimator of air exposure to stainless steel welding fumes.

Welding stainless steel with covered electrodes, also called manual metal arc welding, generates hexavalent airborne chromium. Chromium concentrations in air and post-shift urine samples, collected the same arbitrarily chosen working day, showed a linear relationship. Since post-shift urine samples reflect chromium concentrations of both current and previous stainless steel welding fume exposure, individual urine measurements are suggested as approximate although not exact estimators of current exposure. This study evaluates the practical importance of such measurements by means of confidence limits and tests of validity.

Trace-element concentrations in blood samples from welders of stainless steel or aluminium and a reference group.

The concentrations of 17 trace elements (e.g., copper, cobalt, iron, manganese, chromium, silicon and magnesium) were determined in whole blood samples of 81 persons working with different welding methods on stainless steel or aluminium and 68 nonwelders. Inorganic spark source mass spectrometry was used for the chemical analyses. The data were analyzed by the SIMCA method for pattern recognition (discriminant analysis). No differences were found between the five groups, either in the average levels of the trace elements or in the correlation structures between the trace elements. Thus no blood concentration data on the analyzed elements and collected from a single person contained any information with respect to exposure to the welding fumes investigated.