Simulating aortic root replacement for a surgical wet laboratory in a resource-limited setting: an economical innovation.

Traditional cardiac surgery residency programs rely mainly on teaching surgical skills in the operating room. The increasing complexity of cardiac surgical operations on high-risk patients and the time constraints placed on residents in this surgical discipline negatively impact the learning opportunities for those residents. Simulation models, though efficient, are very expensive. In Third World Countries, they are unavailable for trainees due to financial constraints. We have introduced an innovative and cost-effective way of simulating aortic root replacement in a wet laboratory by applying a hand-made valve conduit or 'pencil conduit' to a bovine heart. It is reproducible, easy to assemble, cost-effective and simple to use. It can help develop and enhance the surgical skills of residents and junior surgeons for this advanced operation, which requires a meticulous surgical technique performed within a limited time frame.

Enhancing mixed toluene and formaldehyde pollutant removal by Zamioculcas zamiifolia combined with Sansevieria trifasciata and its CO2 emission.

Indoor air pollutants comprise both polar and non-polar volatile organic compounds (VOCs). Indoor potted plants are well known for their innate ability to improve indoor air quality (IAQ) by detoxification of indoor air pollutants. In this study, a combination of two different plant species comprising a C3 plant (Zamioculcas zamiifolia) and a crassulacean acid metabolism (CAM) plant (Sansevieria trifasciata) was used to remove polar and non-polar VOCs and minimize CO2 emission from the chamber. Z. zamiifolia and S. trifasciata, when combined, were able to remove more than 95% of pollutants within 48 h and could do so for six consecutive pollutant's exposure cycles. The CO2 concentration was reduced from 410 down to 160 ppm inside the chamber. Our results showed that using plant growth medium rather than soil had a positive effect on decreasing CO2. We also re-affirmed the role of formaldehyde dehydrogenase in the detoxification and metabolism of formaldehyde and that exposure of plants to pollutants enhances the activity of this enzyme in the shoots of both Z. zamiifolia and S. trifasciata. Overall, a mixed plant of Z. zamiifolia and S. trifasciata was more efficient at removing mixed pollutants and reducing CO2 than individual plants.

Mapping human health risk from exposure to potential toxic metal contamination in groundwater of Lower Dir, Pakistan: Application of multivariate and geographical information system.

The study aimed to assess the physicochemical parameters (pH, electrical conductivity (EC), total dissolve solid (TDS), oxidation reduction potential (ORP), Temperature) and potential toxic metals (PTMs), including Ni, Mn, Cr, Cu, Cd, Pb, Co, Fe and Zn in the groundwater of Lower Dir, Pakistan. Furthermore, the pollution sources and spatial distribution pattern of PTMs were also investigated via principal component analysis (PCA) and geographic information system (GIS) application to understand the changing behaviors of PTMs in groundwater. The average concentrations of physicochemical parameters such as pH, EC, TDS, ORP and Temperature were 7.1, 418 µS/cm, 251 mg/L, 193 mV and 25.7 ○C, while the concentrations of PTMs; Ni, Mn, Cr, Cu, Cd, Pb, Co, Fe and Zn were 0.25, 0.34, 0.09, 0.29, 0.10, 0.08, 0.10, 0.83 and 0.25  mg/L, respectively. Among the selected metals, Mn, Cr, Cd, Pb, Co and Fe were exceeded the WHO guidelines and their percentage contribution were 43%, 57%, 45%, 70%, 70% and 62%, respectively. The increasing order of PTMs were; Pb > Co > Fe > Cr > Cd > Mn > Cu > Ni > Zn in the study area. PCA represented three significant factors, which explained 76% variability in the groundwater. Whereas, clustering analysis (CA) grouped groundwater into three distinct clusters less polluted (C1), moderate polluted (C2) and highly polluted (C3). Human health risk assessment was carried out to check the suitability of groundwater for drinking and domestic uses. The HQ and HRIs values of Cd were >1, suggested that the groundwater sources are unfit for drinking and domestic purposes and may be caused potential health risk after long term ingestion.

Metal- and Carbon-Based Materials as Heterogeneous Electrocatalysts for CO2 Reduction.

Climate change caused by continuous rising level of CO2 and the depletion of fossil fuels reserves has made it highly desirable to electrochemically convert CO2 into fuels and commodity chemicals. Implementing this approach will close the carbon cycle by recycling CO2 providing a sustainable way to store energy in the chemical bonds of portable molecular fuels. In order to make the process commercially viable, the challenge of slow kinetics of CO2 electroreduction and low energy efficiency of the process need to be addressed. To this end, this review summarizes the progress made in the past few years in the development of heterogeneous electrocatalysts with a focus on nanostructured material for CO2 reduction to CO, HCOOH/HCOO-, CH2O, CH4, H2C2O4/HC2O-4, C2H4, CH3OH, CH3CH2OH, etc. The electrocatalysts presented here are classified into metals, metal alloys, metal oxides, metal chalcogenides and carbon based materials on the basis of their elemental composition, whose performance is discussed in light of catalyst activity, product selectivity, Faradaic efficiency (FE), catalytic durability and in selected cases mechanism of CO2 electroreduction. The effect of particle size, morphology and solution-electrolyte type and composition on the catalyst property/activity is also discussed and finally some strategies are proposed for the development of CO2 electroreduction catalysts. The aim of this article is to review the recent advances in the field of CO2 electroreduction in order to further facilitate research and development in this area.

Adsorption Kinetics of Malachite Green and Methylene Blue from Aqueous Solutions Using Surfactant-modified Organoclays.

The main objective of this research is to study the adsorption behaviour of malachite green and methylene blue dyes onto the surfactant modified natural clays. The results of SEM, XRD, IR, and thermal analysis confirms the intercalation of organic moiety in to the clay. The adsorption results show that pseudo-first order kinetics best fitted for both the dyes adsorbed on organo-clay. The data also reveals that both dyes are in a good agreement with Langmuir isotherm in both types of modified clays. The value of separation factor, RL, from Langmuir equation and Freundlich constant, n, give an indication of favourable adsorption. The maximum adsorption capacity qm based on Langmuir model was found to be 294-303 mg/g at 25 °C, is in good agreement with the experimental values.