An enhanced characterization process for the elimination of very low level radioactive waste in particle accelerators.

The elimination of very low level waste towards the French national repository requires their radiological characterization to estimate the radionuclide inventory and the associated activities within a waste package. Such characterization is performed by means of activation calculations and measurements. Two elimination projects have been identified at CERN, to dispose of bulk metallic waste and cables activated in the CERN accelerator complex. Based on the experience gained over the last 4 years, we develop a large scale elimination process to dispose of such types of activated equipment. A program for quality controls has therefore been developed through a novel software tool whose purpose is to compute the radiological data required by the repository for the acceptance of the waste as well as performing quality controls.

A new approach to characterize very-low-level radioactive waste produced at hadron accelerators.

Radioactive waste is produced as a consequence of preventive and corrective maintenance during the operation of high-energy particle accelerators or associated dismantling campaigns. Their radiological characterization must be performed to ensure an appropriate disposal in the disposal facilities. The radiological characterization of waste includes the establishment of the list of produced radionuclides, called "radionuclide inventory", and the estimation of their activity. The present paper describes the process adopted at CERN to characterize very-low-level radioactive waste with a focus on activated metals. The characterization method consists of measuring and estimating the activity of produced radionuclides either by experimental methods or statistical and numerical approaches. We adapted the so-called Scaling Factor (SF) and Correlation Factor (CF) techniques to the needs of hadron accelerators, and applied them to very-low-level metallic waste produced at CERN. For each type of metal we calculated the radionuclide inventory and identified the radionuclides that most contribute to hazard factors. The methodology proposed is of general validity, can be extended to other activated materials and can be used for the characterization of waste produced in particle accelerators and research centres, where the activation mechanisms are comparable to the ones occurring at CERN.

Radiation protection challenges in the management of radioactive waste from high-energy accelerators.

The European Laboratory for Particle Physics (CERN) has operated high-energy accelerators for fundamental physics research for nearly 60 y. The side-product of this activity is the radioactive waste, which is mainly generated as a result of preventive and corrective maintenance, upgrading activities and the dismantling of experiments or accelerator facilities. Prior to treatment and disposal, it is common practice to temporarily store radioactive waste on CERN's premises and it is a legal requirement that these storage facilities are safe and secure. Waste treatment typically includes sorting, segregation, volume and size reduction and packaging, which will depend on the type of component, its chemical composition, residual activity and possible surface contamination. At CERN, these activities are performed in a dedicated waste treatment centre under the supervision of the Radiation Protection Group. This paper gives an overview of the radiation protection challenges in the conception of a temporary storage and treatment centre for radioactive waste in an accelerator facility, based on the experience gained at CERN. The CERN approach consists of the classification of waste items into 'families' with similar radiological and physical-chemical properties. This classification allows the use of specific, family-dependent techniques for radiological characterisation and treatment, which are simultaneously efficient and compliant with best practices in radiation protection. The storage was planned on the basis of radiological and other possible hazards such as toxicity, pollution and fire load. Examples are given of technical choices for the treatment and radiological characterisation of selected waste families, which could be of interest to other accelerator facilities.

Instrument response in complex radiation fields.

This paper aims at giving an overview of the main issues for estimating the radiation protection quantities in complex radiation fields. The measurability (or non-measurability) of the radiation protection quantities is discussed together with the main approaches for their estimate. The main mechanisms through which the various components of complex radiation fields are generated are also outlined. The main instruments employed for estimating the radiation protection quantities are described and discussed together with their response. Finally, a practical example is given, by discussing the results of an inter-comparison exercise held at the Gesellschaft für Schwerionenforschung mbH in Darmstadt (Germany) in the framework of the COordinated Network for RAdiation Dosimetry project, funded by the European Commission.

Radioactive waste management and decommissioning of accelerator facilities.

During the operation of high-energy accelerators, the interaction of radiation with matter can lead to the activation of the machine components and of the surrounding infrastructures. As a result of maintenance operation and during decommissioning of the installation, considerable amounts of radioactive waste are evacuated and shall be managed according to the radiation-protection legislation. This paper gives an overview of the current practices in radioactive waste management and decommissioning of accelerators.