ABSTRACT
We present spatial light interference microscopy (SLIM) as a new optical microscopy technique, capable of measuring nanoscale structures and dynamics in live cells via interferometry. SLIM combines two classic ideas in light imaging: Zernike's phase contrast microscopy, which renders high contrast intensity images of transparent specimens, and Gabor's holography, where the phase information from the object is recorded. Thus, SLIM reveals the intrinsic contrast of cell structures and, in addition, renders quantitative optical path-length maps across the sample. The resulting topographic accuracy is comparable to that of atomic force microscopy, while the acquisition speed is 1,000 times higher. We illustrate the novel insight into cell dynamics via SLIM by experiments on primary cell cultures from the rat brain. SLIM is implemented as an add-on module to an existing phase contrast microscope, which may prove instrumental in impacting the light microscopy field at a large scale.
Subject(s)
Holography/instrumentation , Holography/methods , Image Enhancement/instrumentation , Lighting/instrumentation , Microscopy, Interference/instrumentation , Neurons/cytology , Animals , Cells, Cultured , Equipment Design , Equipment Failure Analysis , Microscopy, Interference/methods , RatsABSTRACT
Here we report a technique for transferring graphene layers, one by one, from a multilayer deposit formed by epitaxial growth on the Si-terminated face of a 6H-SiC substrate. The procedure uses a bilayer film of palladium/polyimide deposited onto the graphene coated SiC, which is then mechanically peeled away and placed on a target substrate. Orthogonal etching of the palladium and polyimide leaves isolated sheets of graphene with sizes of square centimeters. Repeating these steps transfers additional sheets from the same SiC substrate. Raman spectroscopy, scanning tunneling spectroscopy, low-energy electron diffraction and X-ray photoelectron spectroscopy, together with scanning tunneling, atomic force, optical, and scanning electron microscopy reveal key properties of the materials. The sheet resistances determined from measurements of four point probe devices were found to be â¼2 kΩ/square, close to expectation. Graphene crossbar structures fabricated in stacked configurations demonstrate the versatility of the procedures.
ABSTRACT
Monolayer membranes of conjugated carbon represent a class of nanomaterial with demonstrated uses in various areas of electronics, ranging from transparent, flexible, and stretchable thin film conductors, to semiconducting materials in moderate and high-performance field-effect transistors. Although graphene represents the most prominent example, many other more structurally and chemically diverse systems are also of interest. This article provides a review of demonstrated synthetic and integration strategies, and speculates on future directions for the field.
Subject(s)
Carbon/chemistry , Gases/chemistry , Graphite/chemistry , Nanotubes, Carbon/chemistryABSTRACT
Nearly all research in micro- and nanofabrication focuses on the formation of solid structures of materials that perform some mechanical, electrical, optical, or related function. Fabricating patterns of charges, by contrast, is a much less well explored area that is of separate and growing interesting because the associated electric fields can be exploited to control the behavior of nanoscale electronic and mechanical devices, guide the assembly of nanomaterials, or modulate the properties of biological systems. This paper describes a versatile technique that uses fine, electrified liquid jets formed by electrohydrodynamics at micro- and nanoscale nozzles to print complex patterns of both positive and negative charges, with resolution that can extend into the submicrometer and nanometer regime. The reported results establish the basic aspects of this process and demonstrate the capabilities through printed patterns with diverse geometries and charge configurations in a variety of liquid inks, including suspensions of nanoparticles and nanowires. The use of printed charge to control the properties of silicon nanomembrane transistors provides an application example.
Subject(s)
Nanostructures/chemistry , Nanotechnology/methods , Anions , Biosensing Techniques , Cations , Electronics , Equipment Design , Humans , Materials Testing , Microscopy, Atomic Force/methods , Microscopy, Electron, Scanning/methods , Nanoparticles/chemistry , Semiconductors , Silicon/chemistryABSTRACT
Recent studies and device demonstrations indicate that horizontally aligned arrays of linearly configured single-walled carbon nanotubes (SWNTs) can serve as an effective thin film semiconductor material, suitable for scalable use in high-performance transistors. This paper presents the results of systematic investigations of the dependence of device properties on channel length, to reveal the role of channel and contact resistance in the operation. The results indicate that, for the range of channel lengths and SWNT diameters studied here, source and drain contacts of Pd yield transistors with effectively Ohmic contacts that exhibit negligible dependence of their resistances on gate voltage. For devices that use Au, modulation of the resistance of the contacts represents a significant contribution to the response. Extracted values of the mobilities of the semiconducting SWNTs and the contact resistances associated with metallic and semiconducting SWNTs are consistent with previous reports on single tube test structures.
ABSTRACT
Because of their potential for use in advanced electronic, nanomechanical, and other applications, large two-dimensional, carbon-rich networks have become an important target to the scientific community. Current methods for the synthesis of these materials have many limitations including lack of molecular-level control and poor diversity. Here, we present a method for the synthesis of two-dimensional carbon nanomaterials synthesized by Mo- and Cu-catalyzed cross-linking of alkyne-containing self-assembled monolayers on SiO(2) and Si(3)N(4). When deposited and cross-linked on flat surfaces, spheres, cylinders, or textured substrates, monolayers take the form of these templates and retain their structure on template removal. These nanomaterials can also be transferred from surface to surface and suspended over cavities without tearing. This approach to the synthesis of monolayer carbon networks greatly expands the chemistry, morphology, and size of carbon films accessible for analysis and device applications.