Occurrence and risk evaluation of endocrine-disrupting chemicals in wastewater and surface water of Lahore, Pakistan.

The current study highlights the occurrence, spatial distribution, and risk assessment of 16 endocrine-disrupting chemicals (EDCs) including their transformation products (TPs) in the wastewater and surface water of Lahore, Pakistan, using solid-phase extraction followed by liquid chromatography-mass spectrometry and gas chromatography-mass spectrometry. The parent EDCs include bisphenol A (BPA), triclosan (TCS), triclocarban (TCC), estrone (E1), estradiol (E2), estriol (E3), ethinylestradiol (EE2), 4-n-octylphenol (4n-OP), and 4-n-nonylphenol (4n-NP). The TPs include two TPs each of BPA, TCC, and estrogens along with a TP of TCS. Most EDCs showed 100% detection frequency in the wastewater with highest median concentration of 1310 ng/L for E3. In the surface water, the highest median concentration was, however, observed for BPA (54.6 ng/L). Spatial variations in terms of sum of concentration due to all EDCs and their TPs were observed at different sampling points which suggest contamination due to industrial waste from nearby industrial estate. Risk evaluation in terms of risk quotient (RQ) and estradiol equivalent factor (EEQ) showed that most of EDCs and their TPs could pose high risk and estrogenicity to the surrounding environment. From the results of the current study, it is observed that the environment of Pakistan is deteriorating and is potential risk for endocrine disruption. It is, therefore, recommended to take stringent measures to make it sustainable for current as well as for future generations.

Removal of ceftriaxone sodium antibiotic from pharmaceutical wastewater using an activated carbon based TiO2 composite: Adsorption and photocatalytic degradation evaluation.

The water pollution becomes a serious concern for the sustainability of ecosystems due to the existence of pharmaceutical products (ceftriaxone (CEF) antibiotic). Even in low concentration of CEF has lethal effects on ecosystem and human health. To remove CEF, TiO2 is considered as an effective and efficient nanoparticles, however its performance is reduced due to wider energy gap and rapid recombination of charge carriers. In this study, activated carbon based TiO2 (ACT-X) heterogeneous nanocomposites were synthesized to improve the intrinsic properties of TiO2 and their adsorption-photocatalytic performance for the removal of CEF. The characterization results revealed that ACT-X composites have slower recombination of charge carriers, lower energy band gap (3.05 eV), and better light absorption under visible region of light. From ACT-X composites, the ACT-4 photocatalyst has achieved highest photocatalytic degradation (99.6%) and COD removal up (99.2%). The results of radical scavengers showed that photocatalytic degradation of CEF is mainly occurred due to superoxide and hydroxyl radicals. Meanwhile, the reusability of ACT-4 up to five cycles shows more than 80% photocatalytic degradation, which make the process more economical. The highest experimental adsorption capacity is achieved up to 844.8 mg g-1 using ACT-4. The favorable and multilayer heterogeneous adsorption is carried out according to the well-fitted data with pseudo-second-order and Freundlich models, respectively. These results indicate that the carbon-based TiO2 composites can be used as a green, stable, efficient, effective, reusable, renewable, and sustainable photocatalyst to eliminate the pharmaceutical pollutants (antibiotics) via adsorption and photocatalytic degradation processes.

Integrating adsorption and photocatalysis: A cost effective strategy for textile wastewater treatment using hybrid biochar-TiO2 composite.

TiO2 based photocatalysts are extensively used for textile wastewater treatment as they are ecofriendly, inexpensive, easily available, nontoxic and have higher photostabililty. However, their wider band gap, charge carrier's recombination, and utilization of light absorbance limits their performance. In the present work, a hybrid biochar-TiO2 composite (BCT) has been synthesized by a facile synthesis strategy to overcome these problems. These photocatalysts are characterized using X-ray Diffraction (XRD), Scanning Electron Microscope (SEM), Fourier Transform Infrared (FTIR), UV-vis diffuse reflectance spectra (DRS), and photoluminescence (PL) to evaluate their crystallinity, morphology, functional groups, bandgap energy and charge separation properties, respectively. The photodegradation of simulated textile wastewater is analyzed using hybrid composites. The hybrid biochar-TiO2 composite showed higher charge separation, slow recombination of electron-hole pairs, and enhanced light absorption as compared to control (pure TiO2 and BC alone). 99.20 % photodegradation efficiency of dye-simulated wastewater is achieved employing optimum hybrid composite, while the pure biochar and TiO2 samples exhibits 85.20 % and 42.60 % efficiencies, respectively. The maximum adsorption capacity is obtained for hybrid biochar-TiO2 sample, 74.30 mgg-1 in comparison to biochar (30.40 mgg-1) and pure TiO2 (1.50 mgg-1). The results show that hybrid biochar-TiO2 composites can perform in the target application of organic industrial pollutant removal.

Adsorption of methylene blue dye from aqueous solution by sugar extracted spent rice biomass.

This study was aimed at using sugar extracted spent rice biomass (SRB) as a potential adsorbent to remove methylene blue (MB) dye from aqueous solution. The SRB was used without any modification. A three factor full factorial experimental design (2(3)) was employed to investigate the effect of factors (adsorbent dose, dye concentration, temperature) and their interaction on the adsorption capacity and color removal. Two levels for each factor were used; adsorbent dose (0.25-0.5g/100mL), dye concentration (25-50mg/L), and temperature (25-45°C). Initial dye concentration and adsorbent dosage were found as significant factors for the adsorption of MB dye. Langmuir isotherm (R(2)>0.998) best explained the equilibrium of MB adsorption on SRB with monolayer adsorption capacity of 8.13mg/g. The pseudo-second order model (R(2)>0.999) was best fitted to explain the adsorption kinetics. Thermodynamic investigation revealed that the adsorption process was spontaneous, endothermic, and was feasible to treat dyeing wastewater.