Investigation of Dermis-derived hydrogels for wound healing applications.

BACKGROUND: Wound healing and skin tissue engineering are mediated, in part, by interactions between cells and the extracellular matrix (ECM). A subset of the ECM, basement membranes (BM), plays a vital role in regulating proper skin healing and function. METHODS: ECM-rich, tissue-specific hydrogels were extracted and assembled from dermis samples. These hydrogels contain BM proteins vital to skin regeneration, including laminin ß3, collagen IV, and collagen VII. The extracts could be assembled to form hydrogels by either temperature or pH mechanism, with the mechanical properties and structure varying with the mechanism of assembly. A wound healing model was developed to investigate the ability of these hydrogels to enhance healing with a single application in vivo. RESULTS: The pH, but not temperature gels were easily applied to the wounds. There were no signs of increased inflammation due to the application of the hydrogels. The width of granulation tissue at the first week was reduced (p = 0.064) relative to controls with the application of hydrogel. There were no changes in wound closure rates or vessel density. CONCLUSIONS: Dermis-derived hydrogels contain BM proteins important for skin regeneration. They can be easily applied, but their poor mechanical strength and rapid degradation may hinder their biological effects.

Materials for engineering vascularized adipose tissue.

UNLABELLED: Loss of adipose tissue can occur due to congenital and acquired lipoatrophies, trauma, tumor resection, and chronic disease. Clinically, it is difficult to regenerate or reconstruct adipose tissue. The extensive microvsacular network present in adipose, and the sensitivity of adipocytes to hypoxia, hinder the success of typical tissue transfer procedures. Materials that promote the formation of vascularized adipose tissue may offer alternatives to current clinical treatment options. A number of synthetic and natural biomaterials common in tissue engineering have been investigated as scaffolds for adipose regeneration. While these materials have shown some promise they do not account for the unique extracellular microenvironment of adipose. Adipose derived hydrogels more closely approximate the physical and chemical microenvironment of adipose tissue, promote preadipocyte differentiation and vessel assembly in vitro, and stimulate vascularized adipose formation in vivo. The combination of these materials with techniques that promote rapid and stable vascularization could lead to new techniques for engineering stable, vascularized adipose tissue for clinical application. In this review we discuss materials used for adipose tissue engineering and strategies for vascularization of these scaffolds. CLINICAL RELEVANCE: Materials that promote formation of vascularized adipose tissue have the potential to serve as alternatives or supplements to existing treatment options, for adipose defects or deficiencies resulting from chronic disease, lipoatrophies, trauma, and tumor resection.

Dermis-derived hydrogels support adipogenesis in vivo.

Biomaterials that support adipogenesis could contribute to tissue engineering therapies to be used as alternatives to traditional methods of tissue reconstruction and regeneration. We have recently shown that hydrogels comprised of urea soluble proteins and polysaccharides extracted from adipose tissue promote preadipocyte differentiation in vitro and adipogenesis in vivo. However, it is not clear if these findings result from the adipose tissue source of the extracts or if the technique isolates adipogenic factors from other tissues. The present study investigates whether the application of this technique to dermis samples would provide adipogenic hydrogels. Extracts from dermis assembled into hydrogels by either temperature or pH mechanisms. Both formulations supported preadipocyte differentiation in vitro and vascularized adipose formation in vivo. The temperature formulation of the gels induced more rapid adipose formation than the pH formulation in vivo. Interestingly, in comparison to our previous studies the dermis derived hydrogels had comparable adipogenic properties to adipose gels in vivo but not in vitro. Further study of these materials could lead to insight of the role of specific matrix properties on adipogenesis.

Extraction and assembly of tissue-derived gels for cell culture and tissue engineering.

Interactions with the extracellular matrix (ECM) play an important role in regulating cell function. Cells cultured in, or on, three-dimensional ECM recapitulate similar features to those found in vivo that are not present in traditional two-dimensional culture. In addition, both natural and synthetic materials containing ECM components have shown promise in a number of tissue engineering applications. Current materials available for cell culture and tissue engineering do not adequately reflect the diversity of ECM composition between tissues. In this paper, a method is presented for extracting solutions of proteins and glycoproteins from soft tissues and inducing assembly of these proteins into gels. The extracts contain ECM proteins specific to the tissue source with low levels of intracellular molecules. Gels formed from the tissue-derived extracts have nanostructure similar to ECM in vivo and can be used to culture cells as both a thin substrate coating and a thick gel. This technique could be used to assemble hydrogels with varying composition depending upon the tissue source, hydrogels for three-dimensional culture, as scaffolds for tissue engineering therapies, and to study cell-matrix interactions.

Characterization of type I collagen gels modified by glycation.

Chronic exposure to reducing sugars due to diabetes, aging, and diet can permanently modify extracellular matrix (ECM) proteins. This non-enzymatic glycosylation, or glycation, can lead to the formation of advanced glycation end products (AGE) and crosslinking of the ECM. This study investigates the effects of glycation on the properties of type I collagen gels. Incubation with glucose-6-phopshate (G6P), a reducing sugar that exhibits similar but more rapid glycation than glucose, modified the biological and mechanical properties of collagen gels. Measures of AGE formation that correlate with increased complications in people with diabetes, including collagen autofluorescence, crosslinking, and resistance to proteolytic degradation, increased with G6P concentration. Rheology studies showed that AGE crosslinking increased the shear storage and loss moduli of type I collagen gels. Fibroblasts cultured on glycated collagen gels proliferated more rapidly than on unmodified gels, but glycated collagen decreased fibroblast invasion. These results show that incubation of type I collagen gels with G6P increases clinically relevant measures of AGE formation and that these changes altered cellular interactions. These gels could be used as in vitro models to study ECM changes that occur in diabetes and aging.

The role of adipose protein derived hydrogels in adipogenesis.

Biomaterials that induce adipogenesis may ultimately serve as alternatives to traditional tissue reconstruction and regeneration techniques. In addition, these materials can provide environments for studying factors that regulate adipogenesis. The present study investigates the potential of adipose-derived matrices to induce adipogenesis in vitro and in vivo. Solutions containing basement membrane proteins and growth factors were extracted from subcutaneous adipose tissue. These extracts could be induced to form gels by either incubating the solutions at 37 degrees C or adjusting the pH to 4.0. The adipose extracts promoted rapid preadipocyte aggregation and formation of lipid-loaded colonies in vitro. Differentiation on adipose-derived gels was greater than tissue culture dishes and the tumor-derived product Matrigel (p < 0.05). Significant adipose formation was observed when adipose-derived gels were implanted around a rat epigastric pedicle bundle. Adipose levels in these gels were significantly greater than Matrigel (p < 0.05). The duration of adipose formation depended on the mechanism for gelling the solutions, with acid gelled matrices having greater adipose levels at 6 weeks than temperature gelled matrices. These adipose-derived hydrogels promote rapid adipogenesis in vitro and in vivo. They may lead to new materials for adipose tissue engineering, and provide an environment for studying cell-matrix interactions in adipogenesis.

Endothelial cell-matrix interactions in neovascularization.

The success of many therapies in regenerative medicine requires the ability to control the formation of stable vascular networks within tissues. The formation of new blood vessels, or neovascularization, is mediated, in part, by interactions between endothelial cells (ECs) and insoluble factors in the extracellular microenvironment. These interactions are determined by the chemical, physical, and mechanical properties of the matrix. Understanding how extracellular matrices (ECMs) and synthetic scaffolds influence neovascularization can contribute to the fundamental knowledge of normal and diseased tissue physiology and can be used to guide the design of new therapies. The goal of this review is to provide an overview of the complex role EC-matrix interactions play in neovascularization. A particular emphasis is placed on presenting differences in two subsets of ECM, basement membranes and stromal matrices, and identification of the properties of these matrices that define their biological functions. Attempts to apply information about EC-ECM interactions to enhance vascularization of synthetic materials are presented, and areas in need of further research are identified throughout this review. Our understanding of the role EC-matrix interactions play in neovascularization remains limited, but continued progress in this area could be of significant benefit to the design of clinically applicable engineered tissues.

Sustained low levels of fibroblast growth factor-1 promote persistent microvascular network formation.

BACKGROUND: Therapeutic neovascularization using high growth factor concentrations may lead to transient vessel formation and abnormal microvascular structure. The goal of this study was to quantify temporal and concentration effects of fibroblast growth factor-1 (FGF-1) on the persistence and morphology of microvascular networks. METHODS: Endothelial cells were incubated in suspension culture forming aggregates that were embedded in fibrin glue (FG) and stimulated with varying concentrations of FGF-1 with of heparin. Capillary networks formed were quantified for 21 days. RESULTS: High FGF-1 concentrations resulted in rapid and intense sprout formation, with excessive branching. At later times, these vessels regressed, with cellular debris in former vessel locations. At later times, the 1-ng/mL group surpassed the high concentration groups with continuous sprout growth and complete FG vascularization by 23 days. CONCLUSION: Sustained low levels of FGF-1 maintained a persistent microvascular network response, whereas higher levels resulted in abnormal phenotype followed by vessel regression.

Therapeutic neovascularization: contributions from bioengineering.

A number of pathological entities and surgical interventions could benefit from therapeutic stimulation of new blood vessel formation. Although strategies designed for promoting neovascularization have shown promise in preclinical models, translation to human application has met with limited success when angiogenesis is used as the single therapeutic mechanism. While clinical protocols continue to be optimized, a number of exciting new approaches are being developed. Bioengineering has played an important role in the progress of many of these innovative new strategies. In this review, we present a general outline of therapeutic neovascularization, with an emphasis on investigations using engineering principles to address this vexing clinical problem. In addition, we identify some limitations and suggest areas for future research.