ABSTRACT
This study demonstrates a novel fiber optic sensing strategy for selective adsorption and rapid detection of Cr(VI) ions by exploiting a suitable metal-organic framework matrix and the characteristic spectral absorption of Cr(VI) at 395 nm wavelength, respectively. U-bent fiber optic sensor (U-FOS) probes that exhibit remarkably high evanescent wave-based absorbance sensitivity were employed to efficiently detect the Cr(VI) ions that are adsorbed to a stable zeolitic imidazolate framework (ZIF-67) matrix immobilized on the probe surface. A facile technique was developed for the fabrication of ZIF-67-coated U-FOS probes (FOS/ZIF-67) involving an in situ deposition process followed by heat treatment. Selectivity of the FOS/ZIF-67 probes to Cr(VI) was confirmed by optical absorption spectral investigations with 14 other heavy metals and interfering ions. The sensor performance was evaluated with a compact light-emitting diode-photodetector-based setup. FOS/ZIF-67 probes demonstrate an ability to detect Cr(VI) ions with a limit of detection of 1 ppb and a wide linear dynamic range from 0.005 to 100 ppm within a short response time of 5 to 10 min. These sensors show good recovery rates with real water samples and a shelf-life of at least 4 weeks under ambient conditions, thereby demonstrating their viability for real-world application.
Subject(s)
Metal-Organic Frameworks , Chromium , Adsorption , IonsABSTRACT
Detecting the ultra-low abundance of analytes in real-life samples, such as biological fluids, water, soil, and food, requires the design and development of high-performance biosensing modalities. The breakthrough efforts from the scientific community have led to the realization of sensing technologies that measure the analyte's ultra-trace level, with relevant sensitivity, selectivity, response time, and sampling efficiency, referred to as Attomolar Analyte Sensing Techniques (AttoSens) in this review. In an AttoSens platform, 1 aM detection corresponds to the quantification of 60 target analyte molecules in 100 µL of sample volume. Herein, we review the approaches listed for various sensor probe design, and their sensing strategies that paved the way for the detection of attomolar (aM: 10-18 M) concentration of analytes. A summary of the technological advances made by the diverse AttoSens trends from the past decade is presented.
Subject(s)
Biosensing Techniques , NanotechnologyABSTRACT
A label-free technique for the detection of triacylglycerides by a localized surface plasmon resonance (LSPR)-based biosensor is demonstrated. An LSPR-based fiber-optic sensor probe is fabricated by immobilizing lipase enzyme on silver nanoparticles (Ag-NPs) coated on an unclad segment of a plastic clad optical fiber. The size and shape of nanoparticles were characterized by high-resolution transmission electron microscopy and UV-visible spectroscopy. The peak absorbance wavelength changes with concentration of triacylglycerides surrounding the sensor probe, and sensitivity is estimated from shift in the peak absorbance wavelength as a function of concentration. The fabricated sensor was characterized for the concentration of triacylglyceride solution in the range 0 to 7 mM. The sensor shows the best sensitivity at a temperature of 37°C and pH 7.4 of the triacylglycerides emulsion with a response time of 40 s. A sensitivity of 28.5 nm/mM of triacylglyceride solution is obtained with a limit of detection of 0.016 mM in the entire range of triacylglycerides. This compact biosensor shows good selectivity, stability, and reproducibility in the entire physiological range of triacylglycerides and is well-suited to real-time online monitoring and remote sensing.
Subject(s)
Biosensing Techniques/instrumentation , Fiber Optic Technology , Glycerides/analysis , Metal Nanoparticles/chemistry , Silver/chemistry , Surface Plasmon Resonance , Reproducibility of ResultsABSTRACT
A detailed primeval study on the lossy mode resonance (LMR) behavior of zinc oxide (ZnO)-coated optical fiber as a refractive index sensor is carried out. Theoretical evaluation predicts ZnO as a good choice for the LMR-based chemical and gas sensor operating in the visible region of the electromagnetic spectrum. To confirm, the optical fiber probe has been fabricated with an optimized film thickness of ZnO over an unclad core of fiber and characterized. Additionally, an LMR-based nanosensor platform utilizing ZnO has also been investigated to find the compatibility of a nanotechnological LMR sensor. The nanostructured LMR sensors have shown enhanced sensitivity in comparison to a bulk layered probe.
