Cold atmospheric plasma modified polycaprolactone solution prior to electrospinning: A novel approach for improving quercetin-loaded nanofiber drug delivery systems.

In this study, we present a novel approach for enhancing the performance of Quercetin-loaded nanofiber drug delivery systems through the modification of Polycaprolactone (PCL) solution using Cold Atmospheric Plasma (CAP) prior to electrospinning. CAP treatment was applied to PCL solutions for varying durations, namely, 0.5, 1, and 3 min. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) collectively demonstrate that CAP application and QU loading induce morphological changes in nanofibers, facilitating the creation of drug delivery systems with modified fiber diameters, devoid of bead formation. CAP treatment duration correlates with varying fiber diameters, with the longest treatment (3 min) producing the largest fibers (1324 ± 387 nm). Concurrently, the incorporation of quercetin (QU) into the PCL nanofibers resulted in reduced fiber diameter. These observations emphasize the pivotal role of CAP modification in tailoring nanofiber size and morphology. Notably, minimal peak shifts indicate no significant molecular structure changes in PCL nanofibers compared to PCL solutions, assuring the absence of unwanted chemical modifications or degradation during electrospinning. Furthermore, specific QU peaks are undetectable in Fourier-transform infrared (FTIR) spectra, suggesting dispersed or amorphous QU molecules within the nanofibers. Additionally, X-ray diffraction (XRD) results demonstrate that CAP treatment does not alter the crystalline structure of the PCL nanofiber drug delivery system. Crystalline planes of PCL remain unchanged, affirming stability under CAP treatment conditions. Water contact angles indicate that CAP treatment affects nanofiber hydrophobicity, with shorter CAP treatment times rendering more hydrophilic surfaces. Cumulative QU release percentages vary, with PCL/CAP-0.5-QU exhibiting the highest release at 56 ± 2.2 %, surpassing unmodified PCL/QU. Moreover, cell viability remains comparable or slightly increased when QU is incorporated into CAP-treated PCL nanofibers, suggesting potential mitigation of cytotoxic effects induced by CAP treatment. The combination of QU and CAP treatment enhances cancer cell viability reduction, QU release from nanofibers, and drug loading efficiency in a synergistic manner.

Electrospun cobalt-doped 2D-MoSe2/polypyrrole hybrid-based carbon nanofibers as electrochemical sensing platforms.

A novel cobalt-doped two-dimensional molybdenum diselenide/polypyrrole hybrid-based carbon nanofiber (Co/MoSe2/PPy@CNF) was prepared using the hydrothermal method followed by electrospinning technique. The structural and morphological properties of the 2D-TMD@CNF-based hybrids were characterized through X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), energy-dispersive spectrometry (EDS), and transmission electron microscopy (TEM). The Co-MoSe2/PPy@CNF exhibited large surface area, porous structure, and improved active sites due to the synergistic effect of the components. The electrochemical and electrocatalytic characteristics of the 2D-TMD@CNF-modified electrodes were also investigated using cyclic voltammetry (CV) and differential pulse voltammetry (DPV) techniques. The Co/MoSe2/PPy@CNF electrode was used as an electrochemical sensor for simultaneous detection of ascorbic acid (AA), dopamine (DA), and uric acid (UA) and showed enhanced catalytic activity and sensitivity. Using DPV measurements, the Co/MoSe2/PPy@CNF demonstrated wide linear ranges of 30-3212 µM for AA, 1.2-536 µM for DA, and 10-1071 µM for UA with low detection limits of 6.32, 0.45, and 0.81 µM, respectively. The developed sensor with the Co/MoSe2/PPy@CNF-modified electrode was also applied to a human urine sample and gave recoveries ranging from 94.0 to 105.5% (n = 3) for AA, DA, and UA. Furthermore, the Co/MoSe2/PPy@CNF-based sensor exhibited good selectivity and reproducibility for the detection of AA, DA, and UA.

Chitosan functionalized gold-nickel bimetallic magnetic nanomachines for motion-based deoxyribonucleic acid recognition.

In this present study, the preparation of chitosan functionalized gold­nickel wire nanomachines (nanomotors) (CS@Au-Ni NMs) for motion-based double-stranded deoxyribonucleic acid (dsDNA) recognition and detection was described. Synthesis of the nanomachines was accomplished by Ni layer formation using direct current (DC) magnetron sputtering over electrochemically deposited Au wires. Subsequently, biopolymer chitosan was dispersed onto this bimetallic layer by drop casting which could provide a novel and functional surface for leading bio-applications. CS@Au-Ni NMs were characterized via scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and zeta potential analysis methods for the elucidation of structural morphology, elemental composition and electrophoretic mobility. On account of presenting the application of these magnetic nanomachines, they were interacted with different concentrations of dsDNA and the changes in their velocities were investigated. The speed CS@Au-Ni NMs were measured as 19 µm/s under 22 mT magnetic field. These magnetically guided nanomachines demonstrated a practical and good sensing ability by recognizing dsDNA between 0.01 mg/L and 10 mg/L. Electrochemical characterization was also performed to identify the surface characteristics. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) experiments presented the interaction of the NMs with dsDNA by indicating the convenient recognition.

Fluorescence Detection of miRNA-21 Using Au/Pt Bimetallic Tubular Micromotors Driven by Chemical and Surface Acoustic Wave Forces.

In this study, surface acoustic wave (SAW) systems are described for the removal of molecules that are unbound to micromotors, thereby lowering the detection limit of the cancer-related biomarker miRNA-21. For this purpose, in the first step, mass production of the Au/Pt bimetallic tubular micromotor was performed with a simple membrane template electrodeposition. The motions of catalytic Au/Pt micromotors in peroxide fuel media were analyzed under the SAW field effect. The changes in the micromotor speed were investigated depending on the type and concentration of surfactants in the presence and absence of SAW streaming. Our detection strategy was based on immobilization of probe dye-labeled single-stranded probe DNA (6-carboxyfluorescein dye-labeled-single-stranded DNA) to Au/Pt micromotors that recognize target miRNA-21. Before/after hybridization of miRNA-21 (for both w/o SAW and SAW streaming conditions), the changes in the speed of micromotors and their fluorescence intensities were studied. The response of fluorescence intensities was observed to be linearly varied with the increase of the miRNA-21 concentration from 0.5 to 5 nM under both w/o SAW and with SAW. The resulting fluorescence sensor showed a limit of detection of 0.19 nM, more than 2 folds lower compared to w/o SAW conditions. Thus, the sensor and behaviors of Au/Pt tubular micromotors were improved by acoustic removal systems.