ABSTRACT
OBJECTIVES: Repair strength can be improved by treating fractured surfaces of a denture. BACKGROUND: This study investigated flexural properties of heat-polymerised acrylic resin specimens repaired with auto-polymerising and visible light curing (VLC) resins after the repair surfaces were wetted with monomers or acetone. MATERIALS AND METHODS: Fifty-four specimens (65 x 10 x 2.5 mm) were prepared and 48 of them were sectioned to simulate denture fracture. Butt-joint designed repair surfaces were wetted with heat-, auto-polymerising monomers and acetone for 180 s and repaired with auto-polymerising and VLC resins. After repairs, specimens were subjected to three-point bending test and flexural strength, strain, fracture load, modulus of elasticity and deflection values were recorded. Data were analysed with Student t and LSD tests (p < or = 0.05). RESULTS: Overall flexural strength, strain, fracture load and deflection values of specimens repaired with VLC resin were significantly higher than the specimens repaired with auto-polymerising resin for all types of wetting agent (p < 0.05). Within the wetting agents, heat- and auto-polymerising monomers produced the best mechanical properties, while wetting with acetone did not provide superior effect over both monomers. CONCLUSION: In clinical use, wetting the repair surfaces may result in stronger repairs. The use of bonding agent in VLC resin repairs in combination with wetting agent results in improved flexural properties.
