Fracture resistance of partial and complete coverage veneers and ceramic crowns for maxillary central incisors.

STATEMENT OF PROBLEM: Minimally invasive treatments have gained popularity in recent years. However, research comparing the fracture resistance of lithium disilicate partial coverage veneer restorations with that of ceramic crowns is lacking. PURPOSE: The purpose of this in vitro study was to evaluate and compare the fracture resistance of lithium disilicate restorations fabricated for preparations of various designs. The designs included veneer preparations with finish lines in the upper, middle, and lower third of the facial surface and ceramic crown preparations with margins in the lower third of the facial surface. All restorations were designed and fabricated using a chairside digital workflow. MATERIAL AND METHODS: Four maxillary right central incisor typodont teeth were prepared for partial coverage veneer preparation with the margin in the upper middle third of the facial surface (PU1/3); partial coverage veneer preparation with margin in lower middle third of the facial surface (PL1/3); complete coverage veneer preparation (CV) with margin in the cervical region; and ceramic crown (CC) preparation. Each preparation was scanned, and 15 casts were 3D printed from each scan. A total of 60 lithium disilicate restorations were fabricated (n=15 per group) using a chairside computer-aided design and computer-aided manufacturing (CAD-CAM) system (Primescan and MCXL). The different restorations were cemented to the 3D printed testing dies with a photopolymerizable resin cement. The specimens were artificially aged with 10 000 thermal cycles between 5 and 55 °C with a dwell time of 30 seconds and were loaded to failure using a universal testing machine. The maximum load to fracture was analyzed using a 1-way ANOVA and post hoc Tukey honestly significant difference (HSD) test (α=.05). Additionally, the fracture patterns of the specimens were evaluated with a stereomicroscope for descriptive purposes. RESULTS: The mean fracture resistance of the chairside CAD-CAM lithium disilicate veneers and ceramic crowns was statistically different depending on the design of the restoration (P<.05). Group CC demonstrated the highest fracture resistance values (1440.66 N), followed by CV (929.8 N) and PU1/3 (756.13 N). The lowest value was for PL1/3 (532.4 N). CONCLUSIONS: The fracture resistance measured for the maxillary central incisor partial coverage veneers with margins in the middle third of the facial surface appear capable of resisting average occlusal forces. However, these veneers demonstrated lower fracture resistance values when compared with complete coverage veneers. Further, lithium disilicate crowns demonstrated higher fracture resistance than veneers, irrespective of their design.

Copper(II) Complexes with Isomeric Morpholine-Substituted 2-Formylpyridine Thiosemicarbazone Hybrids as Potential Anticancer Drugs Inhibiting Both Ribonucleotide Reductase and Tubulin Polymerization: The Morpholine Position Matters.

The development of copper(II) thiosemicarbazone complexes as potential anticancer agents, possessing dual functionality as inhibitors of R2 ribonucleotide reductase (RNR) and tubulin polymerization by binding at the colchicine site, presents a promising avenue for enhancing therapeutic effectiveness. Herein, we describe the syntheses and physicochemical characterization of four isomeric proligands H2L3-H2L6, with the methylmorpholine substituent at pertinent positions of the pyridine ring, along with their corresponding Cu(II) complexes 3-6. Evidently, the position of the morpholine moiety and the copper(II) complex formation have marked effects on the in vitro antiproliferative activity in human uterine sarcoma MES-SA cells and the multidrug-resistant derivative MES-SA/Dx5 cells. Activity correlated strongly with quenching of the tyrosyl radical (Y•) of mouse R2 RNR protein, inhibition of RNR activity in the cancer cells, and inhibition of tubulin polymerization. Insights into the mechanism of antiproliferative activity, supported by experimental results and molecular modeling calculations, are presented.

Prediabetes and poorly controlled type-2 diabetes as risk indicators for peri-implant diseases:A systematic review and meta-analysis.

OBJECTIVE: The study answers the PECO question: "In adults with dental implants (P), do subjects suffering from type-2 diabetes or prediabetes (E) have worse peri-implant conditions (O) than subjects without type-2 diabetes and prediabetes (C)?". Prediabetes (5.7-6.4 % HbA1c), and the different qualities of glycemic control in type-2 diabetes; well-controlled (>8 % HbA1c), and poorly controlled (>8 % HbA1c) individuals; were classified according to the recommendations of the American Diabetes Association. DATA: Predefined search keys were used with search terms including: Dental implant, diabetes mellitus, glycemic control and HbA1c. SOURCES: An electronic search in the MEDLINE, Embase, and Cochrane libraries were conducted without any filters or language restrictions. Additionally, manual search of the reference lists were carried out to identify all relevant articles. STUDY SELECTION: Eligibility criteria were cohort, case-control and cross-sectional studies that answerd our PECO question with at least 1 year of follow-up. From a total of 2660 records, 35 articles (1761 individuals) were included in the analysis. Meta-analytic difference in means for crestal bone loss was 1.2 mm [95 % CI=0.4; 2.1] in patients with prediabetes, 1.8 mm [CI=1.0; 2.7] in poorly controlled patients, whereas 0.4 mm [CI=-0.3; 1.1] in well-controlled individuals. Meta-regression showed that 1 % increase in HbA1c increased crestal bone loss by 0.24 mm. CONCLUSIONS: Within the limitations of the study, patients with poorly controlled type-2 diabetes or prediabetes may have worse peri-implant conditions compared to patients without diabetes and well-controlled type-2 diabetes. Well-controlled type-2 diabetes is not a risk indicator for peri-implant diseases. CLINICAL SIGNIFICANCE: Clinicians should measure blood HbA1c levels when planning implant-supported restorations, thus patients with undiagnosed or poorly controlled type-2 diabetes can be identified, that allows for glycemic level adjustment prior to dental implant surgery, ensuring peri-implant health. PROTOCOL REGISTRATION NUMBER: (CRD42022375263).

The reliability of using gingival crevicular blood to measure blood glucose and hba1c levels in the dental setting: a systematic review and meta-analysis.

OBJECTIVE: There are 500 million patients living with diabetes mellitus worldwide and 50% of them remain undiagnosed. Routine periodontal probing provides gingival crevicular blood in patients with gingivitis. Gingival blood may be useful for diabetes screening without the need for any expensive, painful or time-consuming method by using convenient glucometers. Therefore, the objective of this systematic review and meta-analysis is to answer the question to "is there a difference in glucose or HbA1c levels (O) in patients with positive gingival bleeding (P) measured on gingival crevicular blood (GCB) (I) compared to finger prick capillary blood (CB) (C). MATERIALS AND METHODS: The authors performed an electronic search of six databases using identical MeSH phrases. Only human clinical studies without limitations on the year of publication were considered. Data extraction was done by using standardized data collection sheets. Risk of bias assessment were conducted using QUADAS-2 and QUADAS-C. Meta-analyses were carried out with the random effects model to aggregate the correlation coefficients and the difference between the means between gingival and capillary blood reading, using 95% confidence intervals. RESULTS: The database and manual search yielded 268 articles, from which the selection procedure provided 36 articles for full-text screening, and the final pool of eligible articles composed of 23 studies with 1680 patients. Meta-analysis results on glycemic levels showed differences between the GCB and CB procedures in patients with and without diabetes with values of -6.80 [-17.35; 3.76] and - 4.36 [-9.89; 1.18], respectively. Statistically significant correlations were found (p = 0.001) between GCB and CB measurements in patients with (0.97 [0.927; 0.987]) and without diabetes (0.927 [0.873; 0.958]). CONCLUSION: Gingival blood could prove to be useful to identify patients with undiagnosed diabetes when the necessary amount of uncontaminated blood is present. However, this technique is limited by the possibility of contamination, prandial status and inaccuracies, so it is unsuited to address the patient's glycemic control accurately.

The role of 3D technology in the practical education of congenital coarctation and its treatment-a feasibility pilot study.

BACKGROUND: Coarctation of the aorta (CoA) is a congenital disease with an incidence of 4 out of 10,000 live births, therefore proper education of its treatment is essential. Understanding the disease and the wide array of treatment options is often difficult. Additive manufacturing technology can be used to produce 3D printed hands-on surgical training tools (HOSTT), which can be used for the education and practical training of CoA. This study aimed to investigate the effectiveness of a 3D printable HOSTT for the simulation of coarctation surgery, and it' possible role in practical education. METHODS: Participants were medical students of Semmelweis University between the second and sixth academic year. A virtual 3D model of an aorta with CoA was generated from a computed tomography angiography scan. Each participant received a 3D-printed aorta phantom and performed either one of four surgical treatment modalities. The simulated surgeries included end-to-end anastomosis, end-to-side anastomosis, prosthetic patch, and subclavian flap aortoplasty. Participants provided feedback, evaluating their understanding of the disease and its treatment by the four surgical reconstruction modalities on a seven-point Likert scale before and after the sessions. RESULTS: 21 medical students participated in this study. Participants' average rating of their understanding of CoA disease and it treatment options before practical training was 4.62 ± 1.07. After training, their average rating increased to 6.19 ± 1.08, showing statistically significant difference. CONCLUSIONS: Within this study's limitations, the applied HOSTT, manufactured using 3D printing, was effective for the practical training of CoA's surgical treatment methods for medical students.

Oral Health Knowledge and Habits of Hungarian Monozygotic and Dizygotic Twins: A Pilot Study.

OBJECTIVE: The aim of this research was to collate and analyse the data on the oral health knowledge and the related habits of a Hungarian cohort of monozygotic (MZ) and dizygotic (DZ) twins using the newly developed World Health Organisation Oral Health Questionnaire for Adults (Annex 7). METHOD: A total of 15 sets of MZ twins and 14 sets of DZ twins (58 individuals) aged between 18 and 71 years were enrolled in the study. Each participant had to fill out a web-based questionnaire which comprised 23 questions (Google Forms). The data were collated and the oral health/hygiene habits of MZ and DZ twins were compared. RESULTS: No significant differences were detected between MZ and DZ twins with regards to their daily tooth-cleaning habits or the tooth-cleaning products used by the 2 groups. For instance, when asked how often they clean their teeth, 80% of MZ twins and 71% of DZ twins responded similarly. Further, both groups provided similar responses when questioned about the use of fluoride toothpaste, frequency of dental visits, and dental counselling received as well as a number of other parameters such as snacking of sweets and fear of visiting dentists. CONCLUSIONS: Our pilot analysis of the questionnaire responses from MZ and DZ twins in Hungary did not indicate any significant differences in their oral care habits in general. Further studies with a large cohort are required to confirm or refute our findings.

Clinical Performance of Two-Piece Zirconia Dental Implants After 5 and Up to 12 Years.

PURPOSE: To assess the clinical performance of a two-piece zirconia implant system, with a focus on biologic complications. MATERIALS AND METHODS: A total of 39 patients received 91 two-piece zirconia implants. The patients were recruited from two private clinics and were monitored for 5 to 12 years (median: 5.6 years). The primary outcomes were biologic complications, such as peri-implant infections (peri-implant mucositis and peri-implantitis), and the secondary outcome was radiographically evident marginal bone loss (MBL). RESULTS: Three patients (7.7%) with 9 total implants (9.9%) presented with peri-implant mucositis. MBL that did not exceed the first thread was evident at 32 mesial sites (35%) and 25 distal sites (27.4%). MBL exceeding the first thread but not the third thread was evident at 6 mesial and 5 distal sites (thread pitch: 0.7 mm). Only one peri-implant pocket deepened (4 mm) and showed bleeding; however, the estimated MBL did not exceed 1.65 mm. No peri-implantitis occurred, and no implant was lost. CONCLUSIONS: This prospective study shows high survival rates and a seemingly low prevalence of biologic and prosthetic complications for this two-piece zirconia implant system over an observation period of up to 12 years.

Effect of Chitosan on the Number of Streptococcus mutans in Saliva: A Meta-Analysis and Systematic Review.

We conducted a meta-analysis and systematic review to investigate the efficacy of chitosan-containing chewing gums, and to test their inhibitory effects on Streptococcus mutans. The systematic search was performed in three databases (Cochrane Library, EMBASE, and PubMed) and included English-language randomized-controlled trials to compare the efficacy of chitosan in reducing the number of S. mutans. To assess the certainty of evidence, the GRADE tool was used. Mean differences were calculated with a 95% confidence interval for one outcome: bacterial counts in CFU/mL. The protocol of the study was registered on PROSPERO, registration number CRD42022365006. Articles were downloaded (n = 6758) from EMBASE (n = 2255), PubMed (n = 1516), and Cochrane (n = 2987). After the selection process, a total of four articles were included in the qualitative synthesis and three in the quantitative synthesis. Our results show that chitosan reduced the number of bacteria. The difference in mean quantity was -4.68 × 105. The interval of the random-effects model was [-2.15 × 106; 1.21 × 106] and the prediction interval was [1.03 × 107; 9.40 × 106]. The I2 value was 98% (p = 0.35), which indicates a high degree of heterogeneity. Chitosan has some antibacterial effects when used as a component of chewing gum, but further studies are needed. It can be a promising antimicrobial agent for prevention.

Platelet-Rich Fibrin in Oral Surgery and Implantology: A Narrative Review.

Background: The application of blood concentrates has gained popularity in dentistry in recent years. Platelet-rich fibrin (PRF) has been discussed frequently due to a high content of growth factors and the option of chair-side manufacturing in a simple centrifugation process. PRF is free from adjuvants and inexpensive to produce. The number of studies reporting beneficial effects of PRF in various clinical applications such as alveolar ridge preservation, sinus floor elevation, management and prevention of medical-related osteonecrosis of the jaw, third molar extractions, and guided bone regeneration in dentistry has increased recently. However, to date, neither clinical recommendations nor guidelines are available. The present narrative review aims to summarize the level of evidence on the clinical application of PRF within the field of oral surgery and implantology. Summary: A literature search in Pubmed and Medline has identified 34 articles as a basis for this narrative review. The effectiveness of the clinical application of PRF has been analyzed for five indications within dentistry: medical-related osteonecrosis of the jaw, wisdom tooth extraction, guided bone regeneration, sinus floor elevation, and alveolar ridge preservation. The amount of data for third molar extractions, socket preservation, and guided bone regeneration is extensive. Less data were available for the use of PRF in combination with sinus floor elevations. There is a lack of studies with scientific evidence on PRF and medical-related osteonecrosis of the jaw; however, studies positively impact patient-related outcome measures. Most studies report on beneficial effects when PRF is additionally applied in intrabony defects. There is no evidence of the positive effects of PRF combined with bone graft materials during sinus floor elevation. However, some benefits are reported with PRF as a sole filling material. Key Messages: Many recently published studies show the positive clinical impact of PRF. Yet, further research is needed to ensure the validity of the evidence.

Treatment alternatives for the rehabilitation of the posterior edentulous maxilla.

Rehabilitation of the edentulous maxilla with implant-supported fixed dental prostheses can represent a significant clinical challenge due to limited bone availability and surgical access, among other factors. This review addresses several treatment options to replace missing teeth in posterior maxillary segments, namely the placement of standard implants in conjunction with maxillary sinus floor augmentation, short implants, tilted implants, and distal cantilever extensions. Pertinent technical information and a concise summary of relevant evidence on the reported outcomes of these different therapeutic approaches are presented, along with a set of clinical guidelines to facilitate decision-making processes and optimize the outcomes of therapy.

Therapy for Temporomandibular Disorders: 3D-Printed Splints from Planning to Evaluation.

INTRODUCTION: This article describes the authors' digital workflow-based method for fabricating intraoral occlusal splints, from planning to the evaluation phase. MATERIALS AND METHODS: In our protocol, first, we had a registration phase. This included taking digital impressions, determining the centric relation (CR) position with the deprogrammer Luci Jig, and using the digital facebow for measuring the individual values. The laboratory phase was next, which included planning and manufacturing with a 3D printer. The last phase was delivery, when we checked the stability of the splint and adjusted the occlusal part. RESULT: The average cost is lower for a fully digital splint than for conventional methods. In terms of time, there was also a significant difference between the classic and digital routes. From a dental technical point of view, the execution was much more predictable. The printed material was very rigid and, therefore, fragile. Compared to the analog method, the retention was much weaker. CONCLUSION: The presented method permits time-efficient laboratory production, and may also be performed chairside in a dental office. The technology is perfectly applicable to everyday life. In addition to its many beneficial properties, its negative properties must also be highlighted.

User Experience of Intraoral Scanners in Dentistry: Transnational Questionnaire Study.

INTRODUCTION: Intraoral scanners (IOS) are continuing to gain popularity in clinical dentistry, replacing the traditional impression-taking and related technology. Despite their increasing importance, there are few data on the utility and usage of IOS amongst dentists. This study investigates the user experience of IOS technology as well as the perceived quality of a variety of IOS used by dental clinicians worldwide. METHODS: An online survey of 1072 dentists was conducted to elicit data on the number of individual IOS used, their accessibility, the maintenance fees, and the programmes used. The first part of the questionnaire included demographic data and related questions, whilst the second part focussed on the specific IOS used by the respondents and the satisfaction with their scanners. RESULTS: We surveyed 1072 respondents from 109 different countries. More than three-quarters of the survey cohort (78.8%) use IOS in their daily work, whilst 21.17% do not. The average number of scanners owned by the respondents was 1.5 (±0.9), and in total, the cohort used 36 different types of IOS. More than one-third (38.6%) of the respondents used computer-aided design (CAD) software as well. As for the frequency of IOS usage, 51.5% used the system on a daily basis, 28.2% did so 2 to 3 times a week, and 10.0% did so once a week. Overall, the top 3 IOS used by the cohort were Medit i700 followed by wireless Medit i700 and Dentsply Sirona Primescan. CONCLUSIONS: This study describes, for the first time, the IOS user experience in an international cohort. More than 75% of the respondents used IOS on a daily basis in their practice, whilst Medit and Dentsply Sirona brands were the most popular scanners amongst the group. It appears that digital impression-taking technology is universal, and digital workflow in dentistry will continue to grow.

Association between Hyperglycemia and Medication-Related Osteonecrosis of the Jaw (MRONJ).

BACKGROUND: Medication-related osteonecrosis of the jaw (MRONJ) is a type of jawbone necrosis caused by the use of drugs for some types of cancer and osteoporosis. The current study aimed to evaluate the associations between hyperglycemia and the development of medication-related osteonecrosis of the jaw. METHODS: Our research group investigated data collected between 1 January 2019 and 31 December 2020. A total of 260 patients were selected from the Inpatient Care Unit, Department of Oromaxillofacial Surgery and Stomatology, Semmelweis University. Fasting glucose data were used and included in the study. RESULTS: Approximately 40% of the necrosis group and 21% of the control group presented with hyperglycemia. There was a significant association between hyperglycemia and MRONJ (p < 0.05, p = 0.003). Vascular anomaly and immune dysfunction caused by hyperglycemia can lead to necrosis after tooth extraction. Necrosis is more common in the mandible (75.0%) and in the case of parenteral antiresorptive treatment (intravenous Zoledronate and subcutaneous Denosumab). Hyperglycemia is a more relevant risk factor than bad oral habits (26.7%). CONCLUSIONS: Ischemia is a complication of abnormal glucose levels, a possible risk factor for necrosis development. Hence, uncontrolled or poorly regulated plasma glucose levels can significantly increase the risk of jawbone necrosis after invasive dental or oral surgical interventions.

Preoperative HbA1c and Blood Glucose Measurements in Diabetes Mellitus before Oral Surgery and Implantology Treatments.

Diabetes mellitus has become a worldwide epidemic and is frequently accompanied by a number of complications proportional to the duration of hyperglycemia. The aim of this narrative review is to assess the most up-to-date guidelines on DM provided by both diabetes and dental associations. Furthermore, to gather evidence on the uni/bidirectional relationships of elevated HbA1c levels on dental surgery, implantology, bone augmentation, and periodontology and to demonstrate the importance of measuring HbA1c levels before invasive dental treatments. HbA1c and blood glucose measurements are a minimally invasive method for preventing complications in diabetes mellitus. The authors conducted a literature review to determine which oral conditions are affected by diabetes mellitus. MEDLINE served as a source with the use of a specific search key. Regarding oral complications of diabetes, prevention is the most vital factor. With this publication, we hope to assist physicians and dentists to make prompt diagnoses and to help in recognizing various oral manifestations of diabetes and follow the existing guidelines.

The Utilisation of CAD/CAM Technology Amongst Austrian Dentists: A Pilot Study.

OBJECTIVE: Computer-aided design (CAD) and computer-aided manufacturing (CAM) technology in dentistry has become noticeably more significant in recent years. The further development of CAD/CAM systems has led to a broader range of applications, more user-friendly operation, and improved accessibility. The present online survey aimed to investigate CAD/CAM technology utilisation amongst Austrian dentists as the first social media pilot study from Europe on this specific topic. MATERIALS AND METHODS: For this purpose, an online survey consisting of 27 questions was created using Google Forms. The questions were divided into 3 sections: general inquiries, questions for CAD/CAM users, and questions for nonusers. The questionnaire was randomly distributed to Austrian dentists via email and social media. A total of 115 responses were submitted. RESULTS: The vast majority of respondents, 52.6% (n = 60), practised as general dentists. Furthermore, a significant proportion of participants specialised in oral surgery, 17.5% (n = 20), and orthodontics, 12.3% (n = 14). Approximately half of the respondents, 51.8% (n = 59), reported having a CAD/CAM device at their current workplace. Amongst the CAD/CAM users, 70.7% (n = 58) believed that CAD/CAM is important in increasing the number of patients visiting the dental practice. In total, 54.2% (n = 26) of nonusers indicated the high initial cost of purchasing a CAD/CAM device as the main reason for not utilising this technology. CONCLUSIONS: CAD/CAM technology appears to have infiltrated the workflow of Austrian dentists with predictions of growing implementation amongst dental practices in the future.

The use of Trojan-horse drug delivery system in managing periodontitis.

The aim of this review is to evaluate the possibility of delivering a silver-acid complex via a Trojan-horse mechanism for managing periodontits. We theroised that the complex could be an effective treatment option for bacterial inflammatory processes in the oral cavity. Searches were conducted using MEDLINE, Embase, Web of Science Core Collection, and Google Scholar search engines. We also reviewed several reference lists of the included studies or relevant reviews identified by the search. By using Medical Subject Headings (MeSH) terminology, a comprehensive search was performed for the following keywords: silver, folic acid, periodontitis, macrophages, Trojan-horse mechanism, toxicity, and targeting. Using the keywords mentioned earlier, we selected 110 articles and after appropriate elimination the review was written based on 37 papers. Accordingly the we noted that silver isons were an effective approach to kill oral pathogens. Secondly the Trojan-horse mechanism. could be used by macrophages (as the Trojan horse) to deliver silver ions in large quantities to the inflammatory focus to kill the periodontopathogens. The Trojan-horse mechanism has never been described in the field of dentistry before. The proposed novel approach using the principle of Trojan Horse delivery of drugs/chemicals could be used to manage oral inflammatory conditions. This method can be used to supplement regular treatments.

Point-of-care HbA1c Measurements in Oral Cancer and Control Patients in Hungary.

BACKGROUND/AIM: This study aimed to investigate the link between preoperative glycated hemoglobin (HbA1c) levels and oral cancer patients and diabetes mellitus (DM). We aimed to highlight the importance of point-of-care HbA1c measurements in oral cancer patients. PATIENTS AND METHODS: A total of 214 patients were admitted to the Department of Inpatient Care at Semmelweis University's Department of Oromaxillofacial Surgery and Stomatology between 1 September 2020 and 21 May 2021; individuals, who had undergone maxillofacial surgery under general anesthesia, were included in the study. RESULTS: There was a significant difference between the oral cancer group and the control group in terms of smoking (p=0.009) and alcohol intake (p=0.003). There was no statistically significant difference regarding sex (p=0.132) and DM (p=0.147) between the two groups. The tumor group had an 8.52% greater prevalence of DM, which was not significant. In the oral cancer group, twenty individuals (17.69%) had a higher HbA1c level than the upper level of the optimal metabolic value (6.9%). Nine participants (8.91%) in the control group had an HbA1c value greater than 6.9%, which means that their metabolic level was poor. The oral cancer group did not have higher blood glucose levels than those of the control group. CONCLUSION: No direct connection between high blood glucose levels and oral cancer was found. However, point-of-care HbA1c measurement can be a diagnostic tool to detect DM in the dental office.

Growth Factor Release within Liquid and Solid PRF.

Aim: The purpose of this study was to obtain data concerning growth factor release within liquid and solid platelet-rich fibrin (PRF) matrices and to estimate the amount of potential interindividual variations as a basis for further preclinical and clinical trials. Therefore, we aimed to determine possible differences in the release of growth factors between liquid and solid PRF. Materials and Methods: Blood samples obtained from four subjects were processed to both liquid and solid PRF matrices using a standard centrifugation protocol. Five growth factors (vascular endothelial growth factor, VEGF; epidermal growth factor, EGF; platelet-derived growth factor-BB, PDGF-BB; transforming growth factor-ß1, TGF-ß1; and matrix metallopeptidase 9, MMP-9) have been evaluated at six time points by ELISA over a total observation period of 10 days (1 h, 7 h, 1 d, 2 d, 7 d, and 10 d). Results: Growth factor release could be measured in all samples at each time point. Comparing liquid and solid PRF matrices, no significant differences were detected (p > 0.05). The mean release of VEGF, TGFß-1, PDGF-BB, and MMP-9 raised to a peak at time point five (day 7) in both liquid and solid PRF matrices. VEGF release was lower in liquid PRF than in solid PRF, whereas those of PDGF-BB and MMP-9 were higher in liquid PRF than in solid PRF at all time points. EGF had its peak release already at time point two after 7 h in liquid and solid matrices (hour 7 EGF solid: mean = 180 pg/mL, SD = 81; EGF liquid: mean = 218 pg/mL, SD = 64), declined rapidly until day 2, and had a second slight peak on day 7 in both groups (day 7 EGF solid: mean = 182 pg/mL, SD = 189; EGF liquid: mean = 81 pg/mL, SD = 70). Conclusions: This study detected growth factor release within liquid and solid PRF matrices with little variations. Further preclinical trials are needed to precisely analyze the growth factor release in larger samples and to better understand their effects on wound healing in different clinical indications.

Cytokines Activate JAK-STAT Signaling Pathway in MG-63 Cells on Titanium and Zirconia.

Although titanium has been traditionally used as the gold standard for dental implants, recent years have seen the widespread application of zirconia implants given their superiority with regards to reduced bacterial adhesion, inflammation and cellular-interaction in terms of bio-compatibility. The JAK-STAT signaling pathway plays an important role in bone remodeling and formation. The aim of the study was to investigate the activation of the JAK-STAT pathway through different cytokines in osteoblast-like cells (MG-63) on zirconia in comparison to titanium discs. IFN-γ induced the very strong activation of STAT1 protein, IFN-α activated both STAT1 and STAT3 molecules, IL-6 activated STAT3 and IL-4 induced the activation of STAT6 on both surfaces. The activation of STAT proteins was confirmed by western blot, immunofluorescence and flow cytometry using phospho-specific anti-STAT antibodies, which recognize only phosphorylated STAT proteins. The incubation of MG-63 cells with IFN-γ caused the upregulation of MHC class I and class II proteins when MG-63 cells were grown on zirconia and titanium discs. In sum, the present study shows that the JAK-STAT pathway is activated in MG-63 cells when they are incubated on titanium or zirconia surfaces.

Relation between medication-related jaw necrosis and blood glucose levels A retrospective epidemiological study / A gyógyszer okozta állcsontnekrózis és a vércukorszint kapcsolata. Retrospektív epidemiológiai vizsgálat

Maslach and Jackson. Results: In the field of examined dimensions of burnout syndrome, the most characteristic was emotional exhaustion, which has occurred with a frequency of nearly 30% and with typically high intensity among professionals working in neonatal intensive care units (N = 278). In addition, one-fifth were characterized by a high frequency and intensity of depersonalization. At the same time, nearly a third of them experienced a decrease in personal effectiveness. Workplace and time spent in healthcare did not show a significant connection with the incidence of burnout syndrome, however, burnout syndrome occurred with a higher frequency and intensity among those working in level III. neonatal intensive care unit. Conclusion: This is the first comprehensive burnout survey among premature and new born intensive care units in