Triarylamine Enriched Organostannoxane Drums: Synthesis, Optoelectrochemical Properties, Association Studies, and Gelation Behavior.

The straightforward synthesis of three organotin clusters endowed with six triarylamine-based moieties is reported herein. The optoelectronic properties of the molecules, as well as their ability to form gels, were investigated. The association ability of the compounds was studied as well by means of variable temperature nuclear magnetic resonance (NMR) and ultraviolet-visible (UV-vis) spectroscopy. The optimization of the geometry of the compounds has been performed and compared to the X-ray diffraction of the crystals. The results obtained through this comparison are useful for the explanation of their different gelation behaviors. In fact, organostannoxane drum 1 exhibits a strong ability to form organized supramolecular structures by means of a number of noncovalent short contacts that finally yield luminescent organogels in aromatic solvents.

Dendritic-Like Molecules Built on a Pillar[5]arene Core as Hole Transporting Materials for Perovskite Solar Cells.

Invited for the cover of this issue are the groups of S. Seki (Kyoto), G. Reginato (Sesto Fiorentino), J.-F. Nierengarten (Strasbourg), A. Abate (Berlin) and J. L. Delgado (San Sebastian). The image depicts an artistic view of a dendrimer-like hole transporting material at work in a perovskite solar cell. Read the full text of the article at 10.1002/chem.202101110.

Dendritic-Like Molecules Built on a Pillar[5]arene Core as Hole Transporting Materials for Perovskite Solar Cells.

Multi-branched molecules have recently demonstrated interesting behaviour as charge-transporting materials within the fields of perovskite solar cells (PSCs). For this reason, extended triarylamine dendrons have been grafted onto a pillar[5]arene core to generate dendrimer-like compounds, which have been used as hole-transporting materials (HTMs) for PSCs. The performances of the solar cells containing these novel compounds have been extensively investigated. Interestingly, a positive dendritic effect has been evidenced as the hole transporting properties are improved when going from the first to the second-generation compound. The stability of the devices based on the best performing pillar[5]arene material has been also evaluated in a high-throughput ageing setup for 500 h at high temperature. When compared to reference devices prepared from spiro-OMeTAD, the behaviour is similar. An analysis of the economic advantages arising from the use of the pillar[5]arene-based material revealed however that our pillar[5]arene-based material is cheaper than the reference.

Perovskite Solar Cells Based on Oligotriarylamine Hexaarylbenzene as Hole-Transporting Materials.

A cobalt-catalyzed cyclotrimerization of bis(aryl)alkyne is used as an innovative tool to obtain hole-transport materials (HTMs). The novel HTM containing six units of oligotriarylamine (HAB1), characterized by UV-vis, cyclic voltammetry, DFT, and thermogravimetric analysis, confirms its suitability as an efficient HTM in PSCs. A PCE of 17.5% was obtained in HAB1-containing PSCs, a performance comparable to that obtained with spiro-OMeTAD and with slightly better thermal stability.

Fullerene-Based Materials as Hole-Transporting/Electron-Blocking Layers: Applications in Perovskite Solar Cells.

Here we report for the first time an efficient fullerene-based compound, FU7, able to act as hole-transporting material (HTM) and electron blocking contact. It has been applied on perovskite solar cells (PSCs), obtaining 0.81 times the efficiency of PSCs with the standard HTM, spiro-OMeTAD, with the additional advantage that this performance is reached without any additive introduced in the HTM layer. Moreover, as a proof of concept, we have described for the first time efficient PSCs in which both selective contacts are fullerene derivatives, to obtain unprecedented "fullerene sandwich" PSCs.

Poly(ethylene glycol)-[60]Fullerene-Based Materials for Perovskite Solar Cells with Improved Moisture Resistance and Reduced Hysteresis.

A series of [60]fullerenes covalently functionalized with the polymer poly(ethylene glycol) is presented. These new [60]fullerene-based materials have been incorporated as additives in CH3 NH3 PbI3 (MAPbI3 ), the most common organic-inorganic perovskite used in perovskite solar cells. The extensive photovoltaic study performed by using these materials shows several beneficial effects on the performance of these cells, including a reduction in hysteresis and an increased stability against moisture, whereby the solar cells retain up to 97 % of their initial power conversion efficiency in an ambient atmosphere.

Efficient Regular Perovskite Solar Cells Based on Pristine [70]Fullerene as Electron-Selective Contact.

[70]Fullerene is presented as an efficient alternative electron-selective contact (ESC) for regular-architecture perovskite solar cells (PSCs). A smart and simple, well-described solution processing protocol for the preparation of [70]- and [60]fullerene-based solar cells, namely the fullerene saturation approach (FSA), allowed us to obtain similar power conversion efficiencies for both fullerene materials (i.e., 10.4 and 11.4 % for [70]- and [60]fullerene-based devices, respectively). Importantly, despite the low electron mobility and significant visible-light absorption of [70]fullerene, the presented protocol allows the employment of [70]fullerene as an efficient ESC. The [70]fullerene film thickness and its solubility in the perovskite processing solutions are crucial parameters, which can be controlled by the use of this simple solution processing protocol. The damage to the [70]fullerene film through dissolution during the perovskite deposition is avoided through the saturation of the perovskite processing solution with [70]fullerene. Additionally, this fullerene-saturation strategy improves the performance of the perovskite film significantly and enhances the power conversion efficiency of solar cells based on different ESCs (i.e., [60]fullerene, [70]fullerene, and TiO2 ). Therefore, this universal solution processing protocol widens the opportunities for the further development of PSCs.

Organic Charge Carriers for Perovskite Solar Cells.

The photovoltaic field is currently experiencing the "perovskite revolution". These materials have been known for decades, but only recently have they been applied in solid-state solar cells to obtain outstanding power conversion efficiencies. Given that the variety of perovskites used so far is limited, a lot of attention has been devoted to the development of suitable organic charge-transport materials to improve device performance. In this article, we will focus on the most promising materials able to transport electrons or holes from a structural point of view. Thereby, we focus on organic materials owing to their ease of preparation and manipulation, and this is nicely combined with the potential tuning of their properties through chemical synthesis.

Energy Transfer Between Squaraine Polymer Sections: From Helix to Zigzag and All the Way Back.

We provide a joint experimental and theoretical study of squaraine polymers in solution. The absorption spectra show evidence that two different conformations are present in the polymer: a helix and a zigzag structure. This unique situation allows investigating ultrafast energy-transfer processes between different structural segments within a single polymer chain in solution. The understanding of the underlying dynamics is of fundamental importance for the development of novel materials for light-harvesting and optoelectronic applications. Here, we combine femtosecond transient absorption spectroscopy with time-resolved 2D electronic spectroscopy in order to demonstrate that ultrafast energy transfer within the squaraine polymer chains proceeds from initially excited helix segments to zigzag segments or vice versa, depending on the solvent as well as on the excitation wavenumber. These observations contrast other conjugated polymers such as MEH-PPV where much slower intrachain energy transfer was reported. The reason for the very fast energy transfer in squaraine polymers is most likely a close matching of the density of states between donor and acceptor polymer segments because of the very small reorganization energy in these cyanine-like chromophores.

Charge transfer dynamics in squaraine-naphthalene diimide copolymers.

The synthesis of an alternating squaraine-naphthalene diimide donor-acceptor low band gap polymer (1.14-1.40 eV) as well as its monomolecular analogue is presented. Spectroelectrochemistry experiments and transient absorption spectroscopy in the fs-time regime reveal an ultrafast population of a charge separated state for both polymer and monomer. Local excitation of the squaraine moiety is followed by population of intermediate states, presumably charge transfer states, followed by full charge separation, which occurs within a ca. 2 ps. Charge recombination takes place within 5.2 ps, probably because the system is close to the Marcus optimal region for barrierless ET. For the polymer, measurements of the transient absorption anisotropy show that neither charge nor does energy transfer take place within the lifetime of the charge separated state, indicating that this state is essentially confined within one donor-acceptor pair.

Optoelectronic processes in squaraine dye-doped OLEDs for emission in the near-infrared.

A novel all-organic host-guest system for emission in the NIR is introduced and investigated with respect to its opto-electronic processes. The good agreement between theoretical and experimental results highlights the model character of this system and its potential for electroluminescent application. Comparative measurements provide access to the recombination mechanisms on molecular length scale and show that the emission behavior of the device under operation is controlled by charge carrier dynamics.

Squaraine dyes as efficient coupling bridges between triarylamine redox centres.

Various indolenine squarylium dyes with additional electron-donating amine redox centres have been synthesised and their redox chemistry has been studied. A combination of cyclic voltammetry, spectro-electrochemistry and DFT calculations has been used to characterise the electronic structure of the mono-, di- and, in one case, trications. All monocations still retain the cyanine-like, delocalised character due to the relatively low redox potential of the squaraine bridge and are therefore compounds of Robin-Day class III. Thus we extended previous studies on organic mixed-valence systems by using the indolenine squaraine moiety as very electron-rich bridge between two electron-donating amine redox centres to provoke a strong coupling between the additional redox centres. We synthesised TA3, which has an N-N distance of 26 bonds between the triarylamine redox centres and is to our knowledge the longest bis(triarylamine) radical cation that is completely delocalised. We furthermore show that altering the symmetry of a squaraine dye by substitution of a squaric ring oxygen atom by a dicyanomethylene group has a direct impact on the optical properties of the monocations. In case of the dications, it turned out that the energetically most stable state of dianisylamine-substituted squaraines is an anti-ferromagnetically coupled open-shell singlet state.