Comparative study of molecularly imprinted polymer surface modified magnetic silica aerogel, zeolite Y, and MIL-101(Cr) for dispersive solid phase extraction of fuel ether oxygenates in drinking water.

The study was performed in two phases. First, the polymerization was carried out upon three magnetized surfaces of silica aerogel, zeolite Y, and MIL-101(Cr). Then, optimal molecularly imprinted polymer and optimal extraction conditions were determined by the central composite design-response surface method. Subsequently, the validation parameters of dispersive solid-phase extraction based optimal molecularly imprinted polymer were examined for the extraction of the fuel ether oxygenates. The optimal conditions include the type of adsorbent: Zeolite-magnetic molecularly imprinted polymer, the amount of adsorbent: 40 mg, pH: 7.7, and absorption time: 24.8 min which was selected with desirability equal to 0.996. The calibration graphs were linear between 1 and 100 µg L-1, with good correlation coefficients. The limits of detection were found to be 0.64, 0. 4, and 0.34 µg L-1 for methyl tert-butyl ether, ethyl tert-butyl ether, and tert butyl formate, respectively. The method proved reliable for analyzing fuel ether oxygenates in drinking water.

Release of Interleukin-1ß evaluation among mineral oil mist-exposed workers.

Exposure to aerosols has been found to be linked to respiratory impairment. Although the effects of both indoor and outdoor exposures to particulates have been extensively reported, exposures to mists are less studied. Herein, we reported a survey of mineral oil mist toxicity in an occupational exposure scenario. For the purpose of this study, 65 lathe workers of the metal processing industry, as mineral oil mist-exposed population, were studied. Thereafter, the participants' age, smoking habits and work experience were matched with those of the control workers (n = 65) who were not occupationally exposed to mist. Thereafter, air samples were evaluated from the breathing zone of the workers using NIOSH method 5026. Plasma Interleukin-1ß as a pro-inflammatory indicator was assessed in all the studied subjects. Mean ± standard deviation of mineral oil mist time-weighted average exposure in lathe workers was 7.10± 3.49 mg/m3. IL-1ß cytokine levels were significantly higher in the lathe groups compared to the control group. The mean level of Interleukin-1ß in the control subjects (2922 pg/L) was selected as the cut-off point of the inflammation effect. Based on this pro-inflammatory point, the results of monitoring showed that 60% of the exposed were affected. A Spearman correlation was also found between mineral oil mist exposure and inflammation in the affected subjects. Our findings highlighted the immunological potential of mineral oil mist in occupational exposure. Overall, the results of this study suggested that Interleukin-1ß evaluation in mineral oil mist exposure could be considered as both an acute and chronic inflammation marker.

Assessment of Bacterial Pathogens and their Antibiotic Resistance in the Air of Different Wards of Selected Teaching Hospitals in Tehran.

CONTEXT: Exposure to bio-aerosols in a variety of environments has been of great interest due to the health effects on humans. Hospitals can be the reservoir of these biological agents because of the presence of infectious patients; which can lead to hospital infections and various occupational hazards. In this way, we assessed bacterial contamination in two teaching hospitals in Tehran. AIMS: Our purpose in this study assessment of bacterial pathogens and their antibiotic resistance in the air of different wards of selected teaching hospitals in Tehran. SETTINGS AND DESIGN: In this study, sampling was done according to NIOSH 0800. METHODS AND MATERIAL: This descriptive study was carried out in the different sections of two hospitals in Tehran. A total of 180 air samples were evaluated according to NIOSH 0800. In each section sampling was performed on the culture media in three stations including primary room, end room, and nursing position then the number of colonies counted. The zone of inhibition was measured in antibiotic disks to determine antibiotic resistance of samples. STATISTICAL ANALYSIS USED: Data analysis was performed using SPSS version 21. Initially, the data were normalized using the Kolmogorov-Smirnov test. The difference between the two hospitals was achieved with Mann-Whitney U test for un-normal distribution data. RESULTS: Bacterial contamination in hospital 2 was significantly higher than the hospital 1(P < 0.001). The median number of colonies in hospital 1 was 129.87 (87.46-268.97) CFU/m3 and 297.97 (217.66-431.85) CFU/m3 for hospital 2. Bacterial contamination in the all of stations in hospital 2 and 87% of samples in hospital 1 was higher than the acceptable range of ACGIH (75 CFU/m3). CONCLUSIONS: High bacterial contamination may be related to a lack of hygiene management and poor ventilation system. It seems effective infection control processes, appropriate ventilation systems and supervision systems should be improved.

Risk assessment of chemical mixtures by benchmark dose-principle component analysis approach in occupational exposure.

Mixtures of organic solvents are widely used in industrial processes. Risk assessment for chemical co-exposure has always been a challenge in past years. The present study aims to employ principle component analysis (PCA) to produce an entry for benchmark dose approximation in shoemakers based on the color vision effect. A total of 134 subjects consisting of 67 shoemakers and 67 staff workers were employed for Benchmark Dose (BMD) evaluation. Occupational exposure to benzene, toluene, xylene, and n-hexane was evaluated using NIOSH 1501 and OSHA ID-07 methods. The color vision effect was quantified using Lanthony D-15 desaturated test (D-15d). PCA was run for cumulative exposure dose (CED) of the solvents by MATLAB 2018. Finally, the lowest 95% confidence limit of the benchmark dose (BMDL) was determined using US EPA benchmark dose software (BMDS) version 3.2.1. The color confusion index (CCI) level in shoemakers increased from 1 to 1.15 by a median of 1.07. There was a significant difference in the CCI level (p value<0.0001) between exposed and control subjects. The first score of PCA was used as intake dose level (IDL) in solvents co-exposure. Using BMD analysis, the log-logistics model was fitted with a p-value> 0.1 and the lowest BMDL level. BMDL level was evaluated at 1.63, 10.25, 2.21, and 3.35 ppm for benzene, toluene, xylene, and n-hexane, respectively. The results showed a risk of color vision effect with co-exposure to solvents at different levels in the occupational exposure standards. In conclusion BMDL-PCA approach has been suggested for the risk assessment of chemical co-exposure.

Inside-tube solid-phase microextraction as an interlink between solid-phase microextraction and needle device for n-hexane evaluation in air and urine headspace.

Monitoring the trace amount of chemicals in various samples remains a challenge. This study was conducted to develop a new solid-phase microextraction (SPME) system (inside-tube SPME) for trace analysis of n-hexane in air and urine matrix. The inside-tube SPME system was prepared based on the phase separation technique. A mixture of carbon aerogel and polystyrene was loaded inside the needle using methanol as the anti-solvent. The air matrix of n-hexane was prepared in a Tedlar bag, and n-hexane vapor was sampled at a flow rate of 0.1 L/min. Urine samples spiked with n-hexane were used to simulate the sampling method. The limit of detection using the inside-tube SPME was 0.0003 µg/sample with 2.5 mg of adsorbent, whereas that using the packed needle was 0.004 µg/sample with 5 mg of carbon aerogel. For n-hexane analysis, the day-to-day and within-day coefficient variation were lower than 1.37%, with recoveries over 98.41% achieved. The inside-tube SPME is an inter-link device between two sample preparation methods, namely, a needle trap device and an SPME system. The result of this study suggested the use of the inside-tube SPME containing carbon aerogel (adsorbent) as a simple and fast method with low cost for n-hexane evaluation.

Estimation of formaldehyde occupational exposure limit based on genetic damage in some Iranian exposed workers using benchmark dose method.

The present study evaluated an occupational exposure level for formaldehyde employing benchmark dose (BMD) approach. Dose-response relationship was determined by utilizing cumulative occupational exposure dose and DNA damage. Based on this goal, outcome of comet assay for some Iranian exposed people in occupational exposure individuals was used. In order to assess formaldehyde exposure, 53 occupationally exposed individuals selected from four melamine tableware workshops and 34 unexposed subjects as a control group were examined. The occupational exposure dose was carried out according to the NIOSH-3500 method, and the DNA damage was obtained by employing comet assay in peripheral blood cells. EPA Benchmark Dose Software was employed for calculating BMD and BMDL. Cumulative exposure dose of formaldehyde was between of 2.4 and 1972 mg. According to the findings of the current study, the induction of DNA damage in the exposed persons was increased tail length and tail moment (p < 0.001), when compared to controls. Finally, an acceptable dose-response relationship was obtained in three-category information between formaldehyde cumulative exposure doses and genetic toxicity. BMDL was 0.034 mg/m3 (0.028 ppm), corresponding to genetic damage of peripheral blood cells. It can be concluded that the occupational permissible limit in Iranian people could be at levels lower than OSHA standards.