Tuning the underwater adhesiveness of antibacterial polysaccharides complex coacervates.

HYPOTHESIS: Adjusting the water content and mechanical properties of polyelectrolyte coacervates for optimal underwater adhesion requires simultaneous control of the macromolecular design and the type and concentration of the salt used. Using synthetic or bio-inspired polymers to make coacervates often involves complicated chemistries and large variations in salt concentration. The underwater adhesiveness of simple, bio-sourced coacervates can be tuned with relatively small variations in salt concentration. Bio-sourced polymers can also impart beneficial biological activities to the final material. EXPERIMENTS: We made complex coacervates from charged chitosan (CHI) and hyaluronic acid (HA) with NaCl as the salt. Their water content and viscoelastic properties were investigated to identify the formulation with optimal underwater adhesion in physiological conditions. The coacervates were also studied in antibacterial and cytotoxicity experiments. FINDINGS: As predicted by linear rheology, the CHI-HA coacervates at 0.1 and 0.2 M NaCl had the highest pull-off adhesion strengths of 44.4 and 40.3 kPa in their respective supernatants. In-situ physical hardening of the 0.2 M coacervate upon a salt switch in 0.1 M NaCl resulted in a pull-off adhesion strength of 62.9 kPa. This material maintained its adhesive properties in physiological conditions. Finally, the optimal adhesive was found to be non-cytotoxic and inherently antimicrobial through a chitosan release-killing mechanism.

Water-Soluble Visible Light Sensitive Photoinitiating System Based on Charge Transfer Complexes for the 3D Printing of Hydrogels.

The development of visible-light 3D printing technology by using water-soluble initiating systems has attracted widespread attention due to their potential applications in the manufacture of hydrogels. Besides, at present, the preparation of water-soluble photoinitiators suitable for visible light irradiation (such as LEDs) still remains a challenge. Therefore, this work is devoted to developing water-soluble photoinitiators (PI)/photoinitiating systems (PIS) upon irradiation with a LED @ 405 nm. In detail, a new water-slightly-soluble chalcone derivative dye [(E)-3-(4-(dimethylamino) phenyl)-1-(4-(2-(2-(2-methoxyethoxy) ethoxy) ethoxy) phenyl) prop-2-en-1-one] was synthesized here and used as a PI with a water-soluble coinitiator, i.e., triethanolamine (TEA) which was also used as an electron donor. When combined together, a charge transfer complex (CTC) formed immediately which exhibited excellent initiating ability for the free radical photopolymerization of poly(ethyleneglycol)diacrylate (PEG-DA). In light of the powerful CTC effect, the [dye-TEA] CTC could not only exhibit enhanced water solubility and mechanical properties but could also be effectively applied for 3D printing. This CTC system is environmentally friendly and cost-saving which demonstrates a great potential to prepare hydrogels via photopolymerization.

Thermally Triggered Injectable Underwater Adhesives.

A novel bioinspired underwater adhesive based on the injectable aqueous solution of a graft copolymer with a thermoresponsive backbone is reported, which turns into a sticky hydrogel just below body temperature. With this topology, the collapse of the backbones upon the thermal transition leads to the formation of a percolating network of strong hydrophobic domains. Similar to pressure-sensitive adhesives (PSAs), the hydrogel goes through fibrillation and extensive energy dissipation in large deformations, giving it an edge over conventional chemical hydrogels, which are typically elastic and inherently nonsticky. This capability comes from the hydrophobic nanoscaffold, which resists large deformations to minimize its contact with water. Since hydrophobic interactions are not weakened in water, the behavior of the hydrogel is maintained in aqueous medium. Chemistry-insensitive adhesion of this hydrogel offers a major advantage over current injectable adhesives, which rely on in situ chemical crosslinking reactions with tissues.

Hybrid Complex Coacervate.

Underwater adhesion represents a huge technological challenge as the presence of water compromises the performance of most commercially available adhesives. Inspired by natural organisms, we have designed an adhesive based on complex coacervation, a liquid-liquid phase separation phenomenon. A complex coacervate adhesive is formed by mixing oppositely charged polyelectrolytes bearing pendant thermoresponsive poly(N-isopropylacrylamide) (PNIPAM) chains. The material fully sets underwater due to a change in the environmental conditions, namely temperature and ionic strength. In this work, we incorporate silica nanoparticles forming a hybrid complex coacervate and investigate the resulting mechanical properties. An enhancement of the mechanical properties is observed below the PNIPAM lower critical solution temperature (LCST): this is due to the formation of PNIPAM-silica junctions, which, after setting, contribute to a moderate increase in the moduli and in the adhesive properties only when applying an ionic strength gradient. By contrast, when raising the temperature above the LCST, the mechanical properties are dominated by the association of PNIPAM chains and the nanofiller incorporation leads to an increased heterogeneity with the formation of fracture planes at the interface between areas of different concentrations of nanoparticles, promoting earlier failure of the network-an unexpected and noteworthy consequence of this hybrid system.

Tuning the Interactions in Multiresponsive Complex Coacervate-Based Underwater Adhesives.

In this work, we report the systematic investigation of a multiresponsive complex coacervate-based underwater adhesive, obtained by combining polyelectrolyte domains and thermoresponsive poly(N-isopropylacrylamide) (PNIPAM) units. This material exhibits a transition from liquid to solid but, differently from most reactive glues, is completely held together by non-covalent interactions, i.e., electrostatic and hydrophobic. Because the solidification results in a kinetically trapped morphology, the final mechanical properties strongly depend on the preparation conditions and on the surrounding environment. A systematic study is performed to assess the effect of ionic strength and of PNIPAM content on the thermal, rheological and adhesive properties. This study enables the optimization of polymer composition and environmental conditions for this underwater adhesive system. The best performance with a work of adhesion of 6.5 J/m2 was found for the complex coacervates prepared at high ionic strength (0.75 M NaCl) and at an optimal PNIPAM content around 30% mol/mol. The high ionic strength enables injectability, while the hydrated PNIPAM domains provide additional dissipation, without softening the material so much that it becomes too weak to resist detaching stress.