ABSTRACT
Due to its widespread use in agriculture, atrazine has entered aquatic environments and thus poses potential risks to public health. Therefore, researchers have done many studies to remove it. Advanced reduction process (ARP) is an emerging technology for degrading organic contaminants from aqueous solutions. This study was aimed at evaluating the degradation of atrazine via sulfite/iodide/UV process. The best performance (96% of atrazine degradation) was observed in the neutral pH at 60 min of reaction time, with atrazine concentration of 10 mg/L and concentration of sulfite and iodide of 1 mM. The kinetic study revealed that the removal of atrazine was matched with the pseudo-first-order model. Results have shown that reduction induced by e aq - and direct photolysis dominated the degradation of atrazine. The presence of anions ( Cl - , CO 3 2 - and SO 4 2 - ) did not have a significant effect on the degradation efficiency. In optimal conditions, COD and TOC removal efficiency were obtained at 32% and 4%, respectively. Atrazine degradation intermediates were generated by de-chlorination, hydroxylation, de-alkylation, and oxidation reactions. Overall, this research illustrated that Sulfite/iodide/UV process could be a promising approach for atrazine removal and similar contaminants from aqueous solutions.
ABSTRACT
In this study, removal of Cr(VI) by Scallop shell-Fe3O4 nanoparticles was investigated with variation of pH, adsorbent dosage, initial Cr(VI) concentration, ionic strength and temperature. Coating of Fe3O4 nanoparticles onto Scallop shell was identified by Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy and energy dispersive X-ray analysis. The maximum adsorption was observed at pH 3. Removal efficiency of Cr(VI) was increased with increasing adsorbent dosage, but was decreased with increasing initial Cr(VI) concentration and temperature. Removal efficiency of Cr(VI) was decreased in the presence of sulfate and carbonate ions. Adsorption kinetic study revealed that a pseudo-second order model better described the removal data than a pseudo-first order model and an intra-particle diffusion model. Maximum adsorption capacity was estimated to be 34.48 mg/g. Thermodynamic studies indicated that adsorption of Cr(VI) onto Scallop shell-Fe3O4 nanoparticles occurred via an exothermic (ΔH = -320.88 KJ mol-1) process. Adsorption efficiency of Cr(VI) by Scallop shell-Fe3O4 nanoparticles was maintained even after eight successive cycles.