ABSTRACT
Titania and carbon materials are intensively studied in composite materials including photocatalytic applications. Both positive and negative effects were described in the literature, including charge separation, adsorption enhancement and short-circuiting of the photoelectrons as well. In the present study a more sparsely investigated properties of carbon materials will be highlighted, namely their role as crystallization promoters for titania, during hydrothermal synthesis of the composites. Therefore, carbon nanotubes, carbon coils, activated carbon, graphite and carbon aerogel was used to identify the importance of carbon during the time dependent crystallization of titanium dioxide. The crystal phase composition, morphology, optical properties and photocatalytic activity was followed, and it was found that the anatase and rutile crystallization depended on the used carbon material. The morphology of the particles varied from single anatase sheet-like crystals to hierarchical microball-like structures, while in some cases no specific morphology was observed. Furthermore, it was found that despite the low carbon content (2 wt.%) and microcrystalline structure of TiO2 the composites were proven to be efficient in the degradation of Rhodamine B under UV light irradiation.
ABSTRACT
One of the most fundamental aspects of the heterogeneous catalysis field is the manipulation of the catalysts' activity. In photocatalysis this is carried out by maximizing the right crystal plane of a semiconductor oxide. Until now, most of the papers have achieved this by a combination of different oxides, with noble metals and sometimes with carbon nanomaterials. In this work MWCNTs (multiwalled carbon nanotubes) were applied as "crystallization promoters" in a very simple, safe, one-step hydrothermal method. By this method TiO2 nano/micro crystals with exposed {001} facets were obtained in the first step. The next episode in the crystal manipulation "saga" was the modification of the (001) crystallographic plane's structure by creating ordered/own faceted "crystallographic holes". These elements are capable of further enhancing the obtained activity of titania microcrystals to a higher extent, as shown by the UV driven photocatalytic phenol degradation experiments. The appearance of the holes was "provoked" by simple calcination and their presence and influence were demonstrated by XPS and HRTEM.
ABSTRACT
Water treatment method was developed for the removal of different anionic dyes such as methyl orange and indigo carmine, and also for thymol applying sodium bentonite and cationic surfactant - hexadecyltrimethylammonium bromide (HTAB) - or polyelectrolytes (polydiallyldimethylammonium chloride, poly-DADMAC and poly-amines). The removal efficiency of these model substrates was examined in model water using UV-Vis spectrophotometry, HPLC and TOC analysis. The clay mineral and HTAB were added in one step to the polluted model water in Jar-test experiments. The influence of the cation exchange capacity (CEC) of the applied clay mineral and the presence of polyaluminium chloride coagulant (BOPAC) were also tested for the water treatment process. The structures of the in situ produced and pre-prepared organoclay composites were compared by XRD analysis. The rapid formation of organoclay adsorbents provided very efficient removal of the dyes (65-90 % in 3-10 mg/L TOC(0) range) with 200 mg/L sodium bentonite dose, however thymol was less efficiently separated. Adsorption efficiencies of the composites were compared at different levels of ion exchange such as at 40, 60 and 100 %. In the case of thymol, the elimination of inorganic carbon from the model water before the TOC analysis resulted in some loss of the analysed volatile compound therefore the HPLC analysis was found to be the most suitable tool for the evaluation of the process. This one-step adsorption method using in situ formed organoclay was better performing than the conventional process in which the montmorillonite-surfactant composite is pre-preapared and subsequently added to the polluted water. The purification performance of this method was also evaluated on raw and artificially polluted thermal wastewater samples containing added thymol.
