Evaluation of several protein a resins for application to multicolumn chromatography for the rapid purification of fed-batch bioreactors.

Most of the existing production capacity is based on fed-batch bioreactors. Thanks to the development of more efficient cell lines and the development of high-performance culture media, cell productivity dramatically increased. In a manufacturing perspective, it is necessary to clear as quickly as possible the protein A capture step to respect the manufacturing agenda. This article describes the methodology applied for the design of a multicolumn chromatography process with the objective of purifying as quickly as possible 1,000 and 15,000 L fed-batch bioreactors. Several recent and reference protein A resins are compared based on characteristic values obtained from breakthrough curves. The importance and relevance of resin parameters are explained, and purposely simple indicators are proposed to quickly evaluate the potential of each candidate. Based on simulation data, the optimum BioSC systems associated with each resin are then compared. The quality of the elution delivered by each resin is also compared to complete the assessment. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:941-953, 2017.

Design of high productivity antibody capture by protein A chromatography using an integrated experimental and modeling approach.

An integrated experimental and modeling approach for the design of high productivity protein A chromatography is presented to maximize productivity in bioproduct manufacture. The approach consists of four steps: (1) small-scale experimentation, (2) model parameter estimation, (3) productivity optimization and (4) model validation with process verification. The integrated use of process experimentation and modeling enables fewer experiments to be performed, and thus minimizes the time and materials required in order to gain process understanding, which is of key importance during process development. The application of the approach is demonstrated for the capture of antibody by a novel silica-based high performance protein A adsorbent named AbSolute. In the example, a series of pulse injections and breakthrough experiments were performed to develop a lumped parameter model, which was then used to find the best design that optimizes the productivity of a batch protein A chromatographic process for human IgG capture. An optimum productivity of 2.9 kg L⁻¹ day⁻¹ for a column of 5mm diameter and 8.5 cm length was predicted, and subsequently verified experimentally, completing the whole process design approach in only 75 person-hours (or approximately 2 weeks).

A new multicolumn, open-loop process for center-cut separation by solvent-gradient chromatography.

A comprehensive description of a new process--the GSSR (Gradient with Steady State Recycle) process--for center-cut separation by solvent-gradient chromatography is provided, highlighting its versatility, flexibility, and ease of operation. The GSSR process is particularly suited for ternary separation of bioproducts: it provides three main fractions or cuts, with a target product contained in the intermediate fraction. The process comprises a multicolumn, open-loop system, with cyclic steady state operation, that simulates a solvent gradient moving countercurrently with respect to the solid phase. However, the feed is always injected into the same column and the product always collected from the same column as in a batch process; moreover, both steps occur only once per cycle. The GSSR process was experimentally validated in a pilot unit, using the purification of a crude peptide mixture by reversed phase as a proof of concept; the crude mixture is roughly 50% pure and some of its impurities have isocratic retention times very close to that of the target peptide. Experimental results are reported in terms of cyclic steady-state profiles and process performance indicators, which include product purity and yield. A simplified model-based approach, which uses only a few key components of the crude mixture, is employed to assist in the explanation of the process operation. By dynamically adjusting the switching interval while the process is running, to correctly position the composition profile with respect to the outlet ports, pure product satisfying the target specifications--98% purity and 95% recovery--was obtained under stable operation in the pilot unit.