Improvement in Methane Production from Pelagic Sargassum Using Combined Pretreatments.

The constant golden tides of Sargassum spp., identified to be a mixture of Sargassum natans and Sargassum fluitans, observed recently in the Mexican Caribbean have affected the marine ecosystem and the local economy and have created the need for solutions for their management and use. The Sargassum arrivals have thus been considered as third-generation feedstock for biofuel. Their potential for energetic conversion to biomethane was investigated, with hydrolysis as the limiting step due to its complex composition; therefore, in the present study, different physical, chemical, and enzymatic pretreatments and a combination of them have been evaluated, with the additional use of granular activated carbon, to determine the best yield and methane quality. The combined pretreatments of 2.5% hydrogen peroxide, followed by an enzymatic pretreatment (enzymatic extract from Trametes hirsuta isolated from decomposing wood in the Yucatán Peninsula-Mexico), was the best option, reaching a biodegradability of 95% and maximum methane yield of 387 ± 3.09 L CH4/kg volatile solid. The use of a conductive material, such as granular activated carbon, did not generate significant changes in performance and methane concentration.

Characterization of sediment microbial communities at two sites with low hydrocarbon pollution in the southeast Gulf of Mexico.

BACKGROUND: Coastal ecosystems are prone to hydrocarbon pollution due to human activities, and this issue has a tremendous impact on the environment, socioeconomic consequences, and represents a hazard to humans. Bioremediation relies on the ability of bacteria to metabolize hydrocarbons with the aim of cleaning up polluted sites. METHODS: The potential of naturally occurring microbial communities as oil degraders was investigated in Sisal and Progreso, two port locations in the southeast Gulf of Mexico, both with a low level of hydrocarbon pollution. To do so, we determined the diversity and composition of bacterial communities in the marine sediment during the dry and rainy seasons using 16S rRNA sequencing. Functional profile analysis (PICRUTSt2) was used to predict metabolic functions associated with hydrocarbon degradation. RESULTS: We found a large bacterial taxonomic diversity, including some genera reported as hydrocarbon-degraders. Analyses of the alpha and beta diversity did not detect significant differences between sites or seasons, suggesting that location, season, and the contamination level detected here do not represent determining factors in the structure of the microbial communities. PICRUTSt2 predicted 10 metabolic functions associated with hydrocarbon degradation. Most bacterial genera with potential hydrocarbon bioremediation activity were generalists likely capable of degrading different hydrocarbon compounds. The bacterial composition and diversity reported here represent an initial attempt to characterize sites with low levels of contamination. This information is crucial for understanding the impact of eventual rises in hydrocarbon pollution.

Efficient production of fatty acid methyl esters by a wastewater-isolated microalgae-yeast co-culture.

Improving the competitiveness of biodiesel production by microalgae cultures requires the application of several strategies to obtain a high content of lipids, rapid biomass growth and a capacity to adapt to different kinds of environment, with the aim of using non-renewable nutrient sources. Therefore, the use of an individual indigenous microalgae strain or a consortium from natural or anthropogenic sites is now considered an alternative for biofuel production. This study examined the temporal behaviour of secondary metabolites produced by a native microalgae and yeast consortium isolated from wastewater, which was characterized by a genetic identification method based on the MiSeq system. The predominant species in the consortium was Scenedesmus obliquus, representing 68% of the organisms. In addition, the consortium contained a number of yeast species, including Candida pimensis (43%), Arthroderma vanbreuseghemii (23%), Diaporthe aspalathi/Diaporthe meridionalis (25%) and Hericium americanum (3%). This indigenous co-culture of microalgae and yeast showed biomass productivity of 0.06 g l-1 day-1, with a content of 30% (w/w) carbohydrates, 4% (w/w) proteins and 55% (w/w) lipids. Transesterification of the extracted lipids produced fatty acid methyl esters (FAMEs), which were analysed by gas chromatography (GC). The FAMEs included methyl pentadecanoate (1.90%), cis-10-pentanedecanoic acid methyl ester (1.36%), methyl palmitate (2.64%), methyl palmitoleate (21.36%), methyl oleate (64.95%), methyl linolenate (3.83%) and methyl linolelaidate (3.95%). This composition was relevant for biodiesel production based on the co-culture of indigenous microalgae and yeast consortia.

Experimental design of a simple medium for the bioluminescence of Aliivibrio fischeri and mathematical modelling for growth estimation.

Increasing numbers of studies are using Aliivibrio fischeri (A. fischeri), a marine bioluminescent bacterium as a model, however the culture medium used for its growth are complex and expensive. The objectives of this study were: (1) to evaluate the effect of yeast extract, tryptone, and NaCl to select a simple and inexpensive culture medium suitable for A. fischeri growth and bioluminescence induction; and (2) to compare the performance of mathematical models to predict the growth of A. fischeri. A fractional factorial design was performed to evaluate the effect of yeast extract, tryptone, and sodium chloride on the luminescence of A. fischeri. The result showed that sodium chloride is the most important factor, congruent with its inducer role in bioluminescence. The best medium for bioluminescence induction was selected through an optimization plot, this medium is inexpensive, and generates the same luminescence as commercial formulations. The estimation of A. fischeri growth at OD600 measurement was statistically analyzed. All evaluated models fitted the data adequately (r2  > 0.96). The nonlinear models Gompertz, Richards and logistic provided a lower variation and a better fit of the growth estimation (r2 >0.99), showing that these mathematical models can be used for the accurate growth prediction of A. fischeri.

Characterization of anode and anolyte community growth and the impact of impedance in a microbial fuel cell.

BACKGROUND: A laboratory-scale two-chamber microbial fuel cell employing an aerated cathode with no catalyst was inoculated with mixed inoculum and acetate as the carbon source. Electrochemical impedance spectroscopy (EIS) was used to study the behavior of the MFC during initial biofilm (week 1) and maximum power density (week 20). EIS were performed on the anode chamber, biofilm (without anolyte) and anolyte (without biofilm). Nyquist plots of the EIS data were fitted with two equivalent electrical circuits to estimate the contributions of intrinsic resistances to the overall internal MFC impedance at weeks 1 and 20, respectively. RESULTS: The results showed that the system tended to increase power density from 15 ± 3 (week 1) to 100 ± 15 mW/m(2) (week 20) and current density 211 ± 7 (week 1) to 347 ± 29 mA/m(2) (week 20). The Samples were identified by pyrosequencing of the 16S rRNA gene and showed that initial inoculum (week 1) was constituted by Proteobacteria (40%), Bacteroidetes (22%) and Firmicutes (18%). At week 20, Proteobacterial species were predominant (60%) for electricity generation in the anode biofilm, being 51% Rhodopseudomonas palustris. Meanwhile on anolyte, Firmicutes phylum was predominant with Bacillus sp. This study proved that under the experimental conditions used there is an important contribution from the interaction of the biofilm and the anolyte on cell performance. Table 1 presents a summary of the specific influence of each element of the system under study. CONCLUSIONS: The results showed certain members of the bacterial electrode community increased in relative abundance from the initial inoculum. For example, Proteobacterial species are important for electricity generation in the anode biofilms and Firmicutes phylum was predominant on anolyte to transfer electron. R1 is the same in the three systems and no variation is observed over time. The biofilm makes a significant contribution to the charge transfer processes at the electrode (R2 and Cdl) and, consequently, on the performance of the anode chamber. The biofilm can act as a barrier which reduces diffusion of the anolyte towards the electrode, all the while behaving like a porous material. The anolyte and its interaction with the biofilm exert a considerable influence on diffusion processes, given that it presents the highest values for Rd which increased at week 20.