ABSTRACT
The research presents the inter-comparison of atmospheric variables measured by 9 automatic weather stations. This set of data was compared with the measurements of other weather stations in order to standardize the values that must be adjusted when taken to different areas. The data of a set of a total of 9 GMX500, which measures conventional meteorological variables, and 10 WS100 sensors, which measures precipitation parameters. The automatic stations were set up at the Huancayo Observatory (Geophysical Institute of Peru) for a period of 5 months. The data set of GMX500 were evaluated comparing with the average of the 9 sensors and the WS100 was compared with an optical disdrometer Parsivel2. The temperature, pressure, relative humidity, wind speed, rainfall rate, and drop size distribution were evaluated. A pair of GMX500 sensors presented high data dispersion; it was found found that the errors came from a bad configuration; once this problem was solved, good agreement was archived, with low RMSE and high correlation. It was found that the WS100 sensors overestimate the precipitation with a percentage bias close to 100% and the differences increase with the greater intensity of rain. The drop size distribution retrieved by WS100 have unrealistic behavior with higher concentrations in diameters of 1 mm and 5 mm, in addition to a flattened curve.
Subject(s)
Rain , Weather , Humidity , Peru , Temperature , WindABSTRACT
The first weather radar campaign over Lima, the capital of Peru, a desertic area on the western side of the Peruvian Andes, was carried out to study the occurrence of rain events in summer 2018. The weather radar was installed strategically and was able to overlook three river basins: Rimac, Chillón, and Lurin. An X-band radar (PX-1000) was used, which operates at 9.55 GHz. PX-1000 was built by the Advanced Radar Research Center (ARRC) at the University of Oklahoma (U.S.A.). The radar operated from January 26th to April 1st, 2018, at Cerro Suche located 2910 m ASL and 55 km from the city of Lima. The PX-1000 performed plan-position-indicators (PPI) for elevations starting at 0° up to 20°. The data presented here were obtained using a three-dimensional constant-altitude plan-position-indicator (3D CAPPI), which was generated by high resolution (250 m) nearest point algorithm.
ABSTRACT
This dataset includes data obtained at the Atmospheric Microphysics and Radiation Laboratory (LAMAR) of the Huancayo Observatory (12.04° S, 75.32° W, 3313 m ASL). Two Parsivel2 and two tipping bucket rain gauges are used in this dataset which are operating together since 2018. Data is given in NetCDF format, including two types of files, one NetCDF for precipitation totals and another which contains Parsivel2 data. This data set was collected in the complex topography conditions of the tropical Andes, and its potential use is to study the microphysics of orographic rainfall, atmospheric models and rainfall estimation algorithms.
