In situ evaluation of microbial profile formed on Ti-6Al-4V additive manufacturing disks: 16S rRNA sequencing.

STATEMENT OF PROBLEM: Dental implants obtained by additive manufacturing may present changes in the microbiome formed. However, studies profiling the microbial communities formed on Ti-6Al-4V are lacking. PURPOSE: The purpose of this in situ study was to characterize the profile of the microbial communities formed on Ti-6Al-4V disks produced by additive manufacturing and machining. MATERIAL AND METHODS: Titanium disks produced by additive manufacturing (AMD) and machining (UD) were housed in the buccal region of removable intraoral devices. These devices containing both disks were used by eight participants for 96 hours. After every 24 hours of intraoral exposure, the biofilm that had formed on the disks was collected. The 16S rRNA genes from each specimen were amplified and sequenced with the Miseq Illumina instrument and analyzed. Total microbial quantification was evaluated by analysis of variance-type statistics using the nparLD package. The Wilcoxon test was used to evaluate alpha diversity (α=.05). RESULTS: A difference was found in the microbial communities formed on additively manufactured and machined disks, with a reduction in operational taxonomic units (OTUs) for the AMD group compared with the UD group. Firmicutes and Proteobacteria were the most abundant phyla. Of the 1256 genera sequenced, Streptococcus predominated on both disks. CONCLUSIONS: The microbiome of the biofilm formed on the Ti-6Al-4V disks was significantly influenced by the fabrication method. The AMD disks showed lower total microbial counts than the UD disks.

Dental mini-implant designs to support overdentures: Development, biomechanical evaluation, and 3D digital image correlation.

STATEMENT OF PROBLEM: Custom mini-implants are needed for edentulous patients with extensive mandibular deficiencies where endosteal placement is not possible. However, the best design for these mini-implants is unclear. PURPOSE: The purpose of this in vitro study was to develop 2 dental mini-implant designs to support mandibular overdentures and evaluate the effect of their geometries on primary stability and stress distribution. MATERIAL AND METHODS: Two mini-implant designs were developed with changes in the shape, size, and arrangement of threads and chamfers. The experimental mini-implants were made of Grade V titanium alloy (Ti-6Al-4V), (Ø2.0×10 mm) and submitted to a nanoscale surface treatment. Thirty mini-implants (n=10) were placed into fresh swine bones: experimental-threaded, experimental-helical, and a commercially available product model (Intra-Lock System) as the control. The biomechanical evaluations of the experimental mini-implants were compared with those of the control in terms of primary stability, through insertion torque (IT), and with the pullout test. The analysis of stress distribution was performed by using the method of 3D digital image correlation under 250-N axial load and 100-N oblique (30-degree angled model) load. The data were analyzed by ANOVA and the Tukey HSD test (α=.05). RESULTS: The IT and pullout test presented a statistically significant difference for all mini-implants (P<.05), with higher IT for the experimental-threaded and maximum pullout force for the control, followed by threaded (P=.001) and helical (P=.001). Regarding the 3D digital image correlation, a lower incidence of stress was found in the cervical third for all mini-implants. No statistically significant differences were found between the designs evaluated (P>.05). CONCLUSIONS: Comparing the experimental mini-implants with the commercially available control, the experimental-threaded model presented greater primary stability, and all mini-implants showed less stress in the cervical third.

Incorporation of Hybrid Nanomaterial in Dental Porcelains: Antimicrobial, Chemical, and Mechanical Properties.

Biofilm formation on biomaterials is a challenge in the health area. Antimicrobial substances based on nanomaterials have been proposed to solve this problem. The aim was to incorporate nanostructured silver vanadate decorated with silver nanoparticles (ß-AgVO3) into dental porcelains (IPS Inline and Ex-3 Noritake), at concentrations of 2.5% and 5%, and evaluate the surface characteristics (by SEM/EDS), antimicrobial activity (against Streptococcus mutans, Streptococcus sobrinus, Aggregatibacter actinomycetemcomitans, and Pseudomonas aeruginosa), silver (Ag+) and vanadium (V4+/V5+) ions release, and mechanical properties (microhardness, roughness, and fracture toughness). The ß-AgVO3 incorporation did not alter the porcelain's components, reduced the S. mutans, S. sobrinus and A. actinomycetemcomitans viability, increased the fracture toughness of IPS Inline, the roughness for all groups, and did not affect the microhardness of the 5% group. Among all groups, IPS Inline 5% released more Ag+, and Ex-3 Noritake 2.5% released more V4+/V5+. It was concluded that the incorporation of ß-AgVO3 into dental porcelains promoted antimicrobial activity against S. mutans, S. sobrinus, and A. actinomycetemcomitans (preventing biofilm formation), caused a higher release of vanadium than silver ions, and an adequate mechanical behavior was observed. However, the incorporation of ß-AgVO3 did not reduce P. aeruginosa viability and increased the surface roughness of dental porcelains.

Retention force and deformation of an innovative attachment model for mini-implant-retained overdentures.

STATEMENT OF PROBLEM: The gradual loss of retention and the need for periodic replacement of attachment-system components are the most frequent complications in implant-supported overdentures. PURPOSE: The purpose of this in vitro study was to develop a new attachment system for overdentures with polymeric materials and compare its retention and deformation with a conventional O-ring attachment system. MATERIAL AND METHODS: A matrix with 2 mini-implants with ball abutments was used to simulate the mandibular border during a fatigue resistance test. A total of 60 polyacetal (n=20), polytetrafluoroethylene (n=20), and conventional O-ring (n=20) attachments were captured in pairs with acrylic resin and subjected to 3625 insertion and removal cycles, simulating 30 months of overdenture use. The internal and external deformations of the attachments were assessed using an optical stereomicroscope. One-way ANOVA and the Tukey honestly significant difference tests were used for statistical evaluation (α=.05). RESULTS: The polyacetal attachment system showed the highest retention (P<.001), followed by the O-ring and polytetrafluoroethylene attachments. The O-ring attachments exhibited the lowest deformation (P<.001), and the polyacetal attachments had the highest internal deformation (P<.001). CONCLUSIONS: The newly developed polyacetal attachment model increased the retention of mini-implant-retained overdentures, and despite the deformation experienced, the retention period appears to be better than that of conventional systems.

Effect of casting atmosphere on the marginal deficiency and misfit of Ni-Cr alloys with and without beryllium.

STATEMENT OF PROBLEM: The marginal adaptation of prosthetic crowns is still a significant clinical problem. PURPOSE: The purpose of this in vitro study was to evaluate the marginal deficiency and misfit of Ni-Cr alloys with and without beryllium under different casting conditions. MATERIAL AND METHODS: Four casting conditions were selected: flame-torch, induction/argon, induction/vacuum, and induction/air; and 2 alloys were used, Ni-Cr-Be and Ni-Cr. For each group, 10 metal specimens were prepared. Silicone indirect impressions and analysis of the degree of rounding were used to evaluate the marginal deficiencies of metal copings, and a standardized device for the setting pressure associated with optical microscopy was used to analyze the marginal misfit. Results were evaluated with 2-way ANOVA (α=.05), followed by the Tukey honest significant difference post hoc test, and the Pearson correlation test (α=.05). RESULTS: Alloy (P<.001) and casting technique (P<.001) were shown to affect marginal deficiencies. The Ni-Cr cast using the torch technique showed the highest marginal deficiency, and the Ni-Cr-Be cast in a controlled argon atmosphere showed the lowest (P<.001). Alloy (P=.472) and casting techniques (P=.206) did not affect the marginal misfit, but significant differences were found in the interaction (P=.001); the lowest misfit was achieved using the Ni-Cr-Be, and the highest misfit occurred with the molten Ni-Cr, using the cast torch technique. No correlation was found between deficiency and marginal misfit (r=.04, P=.69). CONCLUSIONS: The interactions demonstrated that the alloy containing beryllium that was cast in an argon atmosphere led to reduced marginal deficiency. Improved marginal adaptation can be achieved for the same alloy by using the torch technique.

Evaluation of antibiofilm and mechanical properties of new nanocomposites based on acrylic resins and silver vanadate nanoparticles.

OBJECTIVE: The purpose of this study was evaluate, for the first time, the impact of incorporation of nanostructured silver vanadate (ß-AgVO3) in antibiofilm and mechanical properties of dental acrylic resins (poly(methyl methacrylate), PMMA). DESIGN: The ß-AgVO3 was synthesized and characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy, and microanalysis (SEM/EDS). Resins specimens were prepared with 0-10% wt.% ß-AgVO3 and characterized by SEM, XRD and optical microscopy. The antibiofim activity of the samples against Candida albicans and Streptococcus mutans was investigated by XTT reduction test, colony-forming units (CFUs), and confocal laser scanning microscopy (CLSM). The flexural strength, hardness, and surface roughness of the samples containing ß-AgVO3 were compared with the pure PMMA matrix. RESULTS: The incorporation of 10% ß-AgVO3 significantly reduced the metabolic activity of C. albicans and S. mutans (p<0.05). There was a reduction in microbial load (CFU/mL) of microorganisms for the different concentrations used (p<0.05), which was confirmed by confocal microscopy. The addition of ß-AgVO3 did not change the mechanical properties of hardness and surface roughness of the resins (p>0.05). However, flexural strength decreased with the addition of amounts greater than 1% (p<0.05). CONCLUSIONS: ß-AgVO3 additions in dental acrylic resin may have an impact on inhibition of biofilm of main microorganisms associated with dental prostheses. However, the viability of clinical use should be evaluated in function of changed promoted in some mechanical properties.

In vitro study of the antibacterial properties and impact strength of dental acrylic resins modified with a nanomaterial.

STATEMENT OF PROBLEM: The accumulation of bacteria on the surface of dental prostheses can lead to systemic disease. PURPOSE: The purpose of this in vitro study was to evaluate the growth of Staphylococcus aureus and Pseudomonas aeruginosa on the surface of autopolymerizing (AP) and heat-polymerizing (HP) acrylic resins incorporated with nanostructured silver vanadate (ß-AgVO3) and its impact strength. MATERIAL AND METHODS: For each resin, 216 circular specimens (9 × 2 mm) were prepared for microbiologic analysis and 60 rectangular specimens (65 × 10 × 3.3 mm) for mechanical analysis, according to the percentage of ß-AgVO3: 0%, control group; 0.5%; 1%; 2.5%; 5%; and 10%. After a biofilm had formed, the metabolic activity of the bacteria was measured using the XTT reduction assay (2,3-bis-(2-methoxy-4-nitro-5-sulfophenyl)-2H-tetrazolium-5-carboxanilide) (n=8), and the number of viable cells was determined by counting colony forming units per milliliter (CFU/mL) (n=8). Confocal laser scanning microscopy (CLSM) was used to complement the analyses (n=2). The mechanical behavior was evaluated by impact strength assays (n=10). Data were analyzed by 2-way ANOVA, followed by the Tukey honestly significant difference (HSD) post hoc test (α=.05). RESULTS: The addition of 5% and 10% ß-AgVO3 significantly decreased the metabolic activity of P. aeruginosa for both resins (P<.05). The HP resin promoted a greater reduction in metabolic activity than the AP resin (P<.05). No difference was found in the metabolic activity of S. aureus according to the XTT (P>.05). The number of CFU/mL for S. aureus and P. aeruginosa decreased significantly when 5% and 10% ß-AgVO3 were added (P<.001). These concentrations significantly reduced the impact strength of the resins (P<.001) because the system was weakened by the presence of clusters of ß-AgVO3. CONCLUSION: The addition of ß-AgVO3 can provide acrylic resins with antibacterial activity but reduces their impact strength. More efficient addition methods should be investigated.

Influence of torsional strength on different types of dental implant platforms.

AIM: The study assessed deformation of implant components submitted to torsion tests of 80 and 120 N · cm using an optical stereomicroscope. MATERIAL AND METHODS: The following 3 types of Titaniumfix conical implant connections (n = 5) measuring Ø 4.0 × 11.5 mm were used: external, internal hexagon and Morse taper connections. The diagonal and lateral measurements of the hexagon implant platform were measured before and after the torsion test. RESULTS: The torsion test using torque of 80 and 120 N · cm altered the implant dental platforms. All groups presented deformation of implant component after torque of 80 N · cm with no statistical difference among them. During torque of 120 N · cm, a difference in the Morse taper connection in relation to the internal and external hexagon connection was observed. The Morse taper connection implant, followed by the internal hex implant, underwent less deformation. Greater deformation occurred in the external hex implants. CONCLUSION: For all the implants, high insertion torques deformed the implant platform preventing long-term maintenance and stability of implants.