ABSTRACT
Perfluoroalkyl carboxylic acids (PFCAs) are widely used synthetic chemicals that are known for their exceptional stability and interfacial activity. Despite their industrial and environmental significance, discrepancies exist in the reported pKa values for PFCAs, often spanning three to four units. These disparities stem from an incomplete understanding of how pH influences the ionized state of PFCA molecules in the bulk solution and at the air-water interface. Using pH titration and surface tension measurements, we show that the pKa values of the PFCAs adsorbed at the air-water interface differ from the bulk. Below the equivalence point, the undissociated and dissociated forms of the PFCAs exist in equilibrium, driving to the spontaneous adsorption and reduced air-water surface tension. Conversely, above the equivalence point, the complete ionization of the headgroup into the carboxylate form renders PFCAs highly hydrophilic, resulting in reduced interfacial activity of the molecules. The distinction in the chemical environments at the interface and bulk results in differences in the pKa of PFCA molecules in the bulk phase and at the air-water interface. We explore the effects of the fluoroalkyl tail length of PFCAs on their surface pKa and interfacial activity across a broad pH range. We further demonstrate the influence of pH-dependent ionized state of PFCAs on their foamability and the rate of microdroplet evaporation, understanding of which is crucial for optimizing their industrial applications and developing effective strategies for their environmental remediation. This study underscores the potential significance of pH in directing the interfacial activity of PFCAs and prompts the inclusion of pH as a key determinant in the predictions of their fate and potential risks in the environment.
ABSTRACT
The surface chemistry of the atmospheric aerosol through homogeneous and heterogeneous catalytic reactions in the bulk water and the air-water surface is reviewed. Water plays a critical role as a substrate or an actual reactant in atmospheric reactions. The atmospheric aerosol differs in shape and surface area. Many gaseous reactive species and oxidants react at the air-water surface. Different thermodynamic methods to estimate partitioning coefficients are explored. The Gibbs free energy is reduced when reactant gaseous species react with oxidant at the air-water surface; this phenomenon is explained using examples. Langmuir-Hinshelwood reaction mechanism to quantify the heterogeneous reaction rate at the air-water interface is discussed. Critical comparisons of various sampling techniques used to analyze adsorption and reaction at the water surface are presented. The heterogeneous reaction rate at the air-water surface is significantly higher than in the bulk water phase due to a cage effect, higher rate of reactions, and lower Gibbs free energy of adsorption.
ABSTRACT
Microplastics are ubiquitous in the environment, leading to a new form of plastic pollution crisis, which has reached an alarming level worldwide. Micron and nanoscale plastics may get integrated into ecological cycles with detrimental effects on various ecosystems. Commodity plastics are widely considered to be chemically inert, and alterations in their surface properties due to environmental weathering are often overlooked. This lack of knowledge on the dynamic changes in the surface chemistry and properties of (micro)plastics has impeded their life-cycle analysis and prediction of their fate in the environment. Through simulated weathering experiments, we delineate the role of sunlight in modifying the physicochemical properties of microplastics. Within 10 days of accelerated weathering, microplastics become dramatically more dispersible in the water column and can more than double the surface uptake of common chemical pollutants, such as malachite green and lead ions. The study provides the basis for identifying the elusive link between the surface properties of microplastics and their fate in the environment.
ABSTRACT
Synthetic amphiphiles used for managing large-scale oil spills have a toxic impact on the environment and marine life. Developing new oil spill recovery technologies is critical to minimize the environmental and ecological impact of such disasters. Here, we show that a mixture of lignin nanoparticles and 1-pentanol forms a biocompatible alternative to nondegradable, synthetic amphiphiles used for oil spill recovery. The pentanol in the mixture generates initial Marangoni flow and confines the spilled oil into a thick slick on the surface of water. While the alcohol solubilizes, lignin nanoparticles irreversibly adsorb onto the oil-water interface. We find that the lignin nanoparticle adsorption to the oil-water interface is governed by a combination of electrostatic, van der Waals, and hydrophobic interactions between the particles and the interface. These interactions, combined with interparticle electrostatic repulsion between nanoparticles adsorbed at the oil-water interface, drive the formation of a submonolayer. The submonolayer transforms into a film of jammed nanoparticles due to compressive stress acting on the interface upon the solubilization of pentanol. This interfacial layer of lignin nanoparticles restricts oil from respreading and locks the oil in its confined state. The herded state of the oil with the interfacial layer of nanoparticles facilitates safe removal of the spilled oil using mechanical methods. The study presents a new principle of using a mixture of heavy alcohol and biocompatible nanoparticles for oil herding applications, thus providing an ecofriendly alternative to oil spill recovery.
ABSTRACT
We report laboratory aerosolization experiments and classical molecular dynamics (MD) simulations, with the objective of investigating the individual effects of the two Corexit surfactants Span 80 (nonionic) and dioctyl sodium sulfosuccinate (DOSS, ionic), on the aerosolization of oil spill matter to the atmosphere. Our simulation results show that Span 80, DOSS, and the oil alkanes n-pentadecane (C15) and n-triacontane (C30) exhibit deep free energy minima at the air/seawater interface. C15 and C30 exhibit deeper free energy minima at the interface when Span 80 is present, as compared to the situation when DOSS or no surfactants are at the interface. These results suggest that Span 80 makes these oil hydrocarbons more likely to be adsorbed at the surface of seawater droplets and carried out to the atmosphere, relative to DOSS or to the situation where no surfactants are present. These simulation trends are in qualitative agreement with our experimental observations in a bubble-column setup, where larger amounts of oil hydrocarbons are ejected when Span 80 is mixed with oil and injected into the column, as compared to when DOSS is used. Our simulations also indicate that Span 80 has a larger thermodynamic incentive than DOSS to move from the seawater phase and into the air/seawater interface. This observation is also in qualitative agreement with our experimental measurements, which indicate that Span 80 is ejected in larger quantities than DOSS. Our simulations also suggest that DOSS predominantly adopts a perpendicular orientation with respect to the air/seawater interface at a dispersant to oil ratio (DOR) of 1:20, but has a slight preference to lie parallel to the interfaces at a DOR = 1:5; in both cases, DOSS molecules have their tails wide open and stretched. In contrast, Span 80 has a slight preference to align parallel to the interfaces with a coiled conformation at both DOR values.
ABSTRACT
Atmospheric aerosols (e.g., fog droplets) are complex, multiphase mediums. Depending on location, time of day, and/or air mass source, there can be considerable variability within these droplets, relating to temperature, pH, and ionic strength. Due to the droplets' inherently small size, the reactions that occur within these droplets are determined by bulk aqueous phase and air-water interfacial conditions. In this study, the reaction of benzene and hydroxyl radicals is examined kinetically in a thin-film flow-tube reactor. By varying the aqueous volume (e.g., film thickness) along the length of the reactor, both bulk and interfacial reaction rates are measured from a single system. Temperature, pH, and ionic strength are varied to model conditions typical of fog events. Oxygen-poor conditions are measured to study oxygen's overall effect on the reaction pathway. Initial rate activation energies and the bulk aqueous phase and interfacial contributions to the overall rate constant are also obtained.
ABSTRACT
Oil spills in the deep-sea environment such as the 2010 Deep Water Horizon oil spill in the Gulf of Mexico release vast quantities of crude oil into the sea-surface environment. Various investigators have discussed the marine transport and fate of the oil into different environmental compartments (air, water, sediment, and biota). The transport of the oil into the atmosphere in these previous investigations has been limited to only evaporation, a volatility dependent pathway. In this work, we studied the aerosolization of oil spill matter via bursting bubbles as they occur during whitecaps in a laboratory aerosolization reactor. By evaluating the alkane content in oil mousse, crude oil, the gas phase, and particulate matter we clearly demonstrate that aerosolization via bursting bubbles is a solubility and volatility independent transport pathway for alkanes. The signature of alkane fractions in the native oil and aerosolized matter matched well especially for the less volatile alkanes (C20-C29). Scanning electron microscope interfaced with energy dispersive X-ray images identified the carbon fractions associated with salt particles of aerosols. Theoretical molecular dynamics simulations in the accompanying paper lend support to the observed propensity for alkanes at air-salt water interfaces of breaking bubbles and the produced droplets. The presence of a dispersant in the aqueous phase increased the oil ejection rate at the surface especially for the C20-C29 alkanes. The information presented here emphasizes the need to further study sea-spray aerosols as a possible transport vector for spilled oil in the sea surface environment.
Subject(s)
Aerosols/analysis , Air Pollutants/analysis , Models, Chemical , Petroleum/analysis , Seawater/chemistry , Water Pollutants, Chemical/analysis , Air Pollutants/chemistry , Particulate Matter/analysis , Petroleum Pollution , Water Pollutants, Chemical/chemistryABSTRACT
Potential of mean force (PMF) calculations and molecular dynamics (MD) simulations were performed to investigate the properties of oil n-alkanes [i.e., n-pentadecane (C15), n-icosane (C20) and n-triacontane (C30)], as well as several surfactant species [i.e., the standard anionic surfactant sodium dodecyl sulfate (SDS), and three model dispersants similar to the Tween and Span species present in Corexit 9500A] at air/salt water interfaces. This study was motivated by the 2010 Deepwater Horizon (DWH) oil spill, and our simulation results show that, from the thermodynamic point of view, the n-alkanes and the model dispersants have a strong preference to remain at the air/salt water interface, as indicated by the presence of deep free energy minima at these interfaces. The free energy minimum of these n-alkanes becomes deeper as their chain length increases, and as the concentration of surfactant species at the interface increases. The n-alkanes tend to adopt a flat orientation and form aggregates at the bare air/salt water interface. When this interface is coated with surfactants, the n-alkanes tend to adopt more tilted orientations with respect to the vector normal to the interface. These simulation results are consistent with the experimental findings reported in the accompanying paper [Ehrenhauser et al., Environ. Sci.: Processes Impacts 2013, in press, (DOI: 10.1039/c3em00390f)]. The fact that these long-chain n-alkanes show a strong thermodynamic preference to remain at the air/salt water interfaces, especially if these interfaces are coated with surfactants, makes these species very likely to adsorb at the surface of bubbles or droplets and be ejected to the atmosphere by sea surface processes such as whitecaps (breaking waves) and bubble bursting. Finally, the experimental finding that more oil hydrocarbons are ejected when Corexit 9500A is present in the system is consistent with the deeper free energy minima observed for the n-alkanes at the air/salt water interface at increasing concentrations of surfactant species.
Subject(s)
Aerosols/analysis , Air Pollutants/analysis , Petroleum Pollution/analysis , Petroleum/analysis , Seawater/chemistry , Surface-Active Agents/chemistry , Water Pollutants, Chemical/analysis , Air Pollutants/chemistry , Atmosphere/chemistry , Models, Chemical , Molecular Dynamics Simulation , Water Pollutants, Chemical/chemistryABSTRACT
Free energy profiles associated with transfer of chlorinated and brominated halomethane molecules from the gas phase across the water-vapor interface to the aqueous phase were calculated using classical molecular dynamics simulations. The investigated species include chloromethane (CH3Cl), bromomethane (CH3Br), dichloromethane (CH2Cl2), dibromomethane (CH2Br2), chloroform (CHCl3), and bromoform (CHBr3). The employed halomethane force field was tuned by scaling up the atomic charges to reproduce the experimental hydration free energies. The computed free energy profiles have a minimum at the water-vapor interface of about 12-15 kJ·mol(-1) relative to full hydration in the bulk liquid. This implies that the halomethanes exhibit enhanced interfacial concentrations in systems with large surface area per unit volume, such as air bubbles dispersed in water or water droplets dispersed in air. Implications for water treatment as well as for atmospheric chemistry are discussed.
ABSTRACT
Methyl salicylate (MeSA) is a green leaf volatile (GLV) compound that is emitted in significant amounts by plants, especially when they are under stress conditions. GLVs can then undergo chemical reactions with atmospheric oxidants, yielding compounds that contribute to the formation of secondary organic aerosols (SOAs). We investigated the adsorption of MeSA on atmospheric air/water interfaces at 298 K using thermodynamic integration (TI), potential of mean force (PMF) calculations, and classical molecular dynamics (MD) simulations. Our molecular models can reproduce experimental results of the 1-octanol/water partition coefficient of MeSA. A deep free energy minimum was found for MeSA at the air/water interface, which is mainly driven by energetic interactions between MeSA and water. At the interface, the oxygenated groups in MeSA tend to point toward the water side of the interface, with the aromatic group of MeSA lying farther away from water. Increases in the concentrations of MeSA lead to reductions in the height of the peaks in the MeSA-MeSA g(r) functions, a slowing down of the dynamics of both MeSA and water at the interface, and a reduction in the interfacial surface tension. Our results indicate that MeSA has a strong thermodynamic preference to remain at the air/water interface, and thus chemical reactions with atmospheric oxidants are more likely to take place at this interface, rather than in the water phase of atmospheric water droplets or in the gas phase.
Subject(s)
Atmosphere/chemistry , Plant Leaves/chemistry , Salicylates/chemistry , Air , Models, Molecular , Molecular Dynamics Simulation , Surface Properties , Water/chemistryABSTRACT
Green leaf volatiles (GLVs) are oxygenated hydrocarbons that are emitted by plants, especially under stress conditions such as mechanical damage and local weather changes. GLVs can react with photochemically-generated oxidants (e.g., OH radicals) in atmospheric water drops, and contribute to the formation of secondary organic aerosols (SOAs). Here we investigated the adsorption of a gas phase GLV, 2-methyl-3-buten-2-ol (MBO) and OH radicals on atmospheric air/water interfaces using classical molecular dynamics (MD) simulations and potential of mean force (PMF) calculations. Our models can reproduce experimental values of the free energy of hydration of MBO and ËOH, as well as 1-octanol/water partition coefficients of MBO determined experimentally in this study. Both MBO and ËOH have a strong thermodynamic incentive to remain at the air/water interface, with their density profiles overlapping significantly at the interface. These results suggest that chemical reactions between MBO and ËOH are more likely to take place at the interface, rather than inside the bulk of water droplets or in the vapor phase. We found a significant number of contacts between MBO and ËOH in our simulations, which could lead to reactions between these two species.
ABSTRACT
Polycyclic aromatic hydrocarbons (PAH) are ubiquitous pollutants in the atmosphere, predominantly known for their toxicity. Although there has been substantial work on the atmospheric degradation of PAH, little is known about how the presence of atmospheric droplets (e.g., a fog cloud) affects the fate of PAH. In order to assess the processing of PAH and their corresponding oxidation products during a fog event, two field-sampling campaigns in Fresno, CA and Davis, CA were conducted. The simultaneous evaluation of concentrations of the PAH and oxygenated polycyclic aromatic compounds (OPAC) in the gas phase, particulate matter and fog water droplets before, during and after fog allows for the characterization of transformative and transport processes in a fog cloud. By tracking the ratio of OPAC to PAH in the individual atmospheric phases, two major polycyclic aromatic compounds-processing pathways can be identified: (i) the dissolution of OPAC from particulate matter and (ii) the uptake and oxidation of PAH in the fog water droplets. Wet deposition steadily decreases the pollutant concentration in the fog cloud droplets during a fog event; however, uptake and concentration via evaporative water loss upon the dissipation of a fog cloud cause an increase in the atmospheric pollutant concentration.
Subject(s)
Air Pollutants/analysis , Atmosphere/chemistry , Environmental Monitoring/methods , Polycyclic Aromatic Hydrocarbons/analysis , Weather , Air Pollution/statistics & numerical data , California , CitiesABSTRACT
Classical molecular dynamics (MD) were performed to investigate the growth of ice from supercooled aqueous solutions of benzene, naphthalene, or phenanthrene. The main objective of this study is to explore the fate of those aromatic molecules after freezing of the supercooled aqueous solutions, i.e., if these molecules become trapped inside the ice lattice or if they are displaced to the QLL or to the interface with air. Ice growth from supercooled aqueous solutions of benzene, naphthalene, or phenanthrene result in the formation of quasi-liquid layers (QLLs) at the air/ice interface that are thicker than those observed when pure supercooled water freezes. Naphthalene and phenanthrene molecules in the supercooled aqueous solutions are displaced to the air/ice interface during the freezing process at both 270 and 260 K; no incorporation of these aromatics into the ice lattice is observed throughout the freezing process. Similar trends were observed during freezing of supercooled aqueous solutions of benzene at 270 K. In contrast, a fraction of the benzene molecules become trapped inside the ice lattice during the freezing process at 260 K, with the rest of the benzene molecules being displaced to the air/ice interface. These results suggest that the size of the aromatic molecule in the supercooled aqueous solution is an important parameter in determining whether these molecules become trapped inside the ice crystals. Finally, we also report potential of mean force (PMF) calculations aimed at studying the adsorption of gas-phase benzene and phenanthrene on atmospheric air/ice interfaces. Our PMF calculations indicate the presence of deep free energy minima for both benzene and phenanthrene at the air/ice interface, with these molecules adopting a flat orientation at the air/ice interface.
Subject(s)
Benzene/chemistry , Ice , Molecular Dynamics Simulation , Naphthalenes/chemistry , Phenanthrenes/chemistry , Air , Models, Molecular , Solutions , Water/chemistryABSTRACT
The adsorption of gas-phase naphthalene and ozone molecules onto air/ice interfaces coated with different surfactant species (1-octanol, 1-hexadecanol, or 1-octanal) was investigated using classical molecular dynamics (MD) simulations. Naphthalene and ozone exhibit a strong preference to be adsorbed at the surfactant-coated air/ice interfaces, as opposed to either being dissolved into the bulk of the quasi-liquid layer (QLL) or being incorporated into the ice crystals. The QLL becomes thinner when the air/ice interface is coated with surfactant molecules. The adsorption of both naphthalene and ozone onto surfactant-coated air/ice interfaces is enhanced when compared to bare air/ice interface. Both naphthalene and ozone tend to stay dissolved in the surfactant layer and close to the QLL, rather than adsorbing on top of the surfactant molecules and close to the air region of our systems. Surfactants prefer to orient at a tilted angle with respect to the air/ice interface; the angular distribution and the most preferred angle vary depending on the hydrophilic end group, the length of the hydrophobic tail, and the surfactant concentration at the air/ice interface. Naphthalene prefers to have a flat orientation on the surfactant coated air/ice interface, except at high concentrations of 1-hexadecanol at the air/ice interface; the angular distribution of naphthalene depends on the specific surfactant and its concentration at the air/ice interface. The dynamics of naphthalene molecules at the surfactant-coated air/ice interface slow down as compared to those observed at bare air/ice interfaces. The presence of surfactants does not seem to affect the self-association of naphthalene molecules at the air/ice interface, at least for the specific surfactants and the range of concentrations considered in this study.
Subject(s)
Atmosphere/chemistry , Ice , Molecular Dynamics Simulation , Naphthalenes/chemistry , Ozone/chemistry , Surface-Active Agents/chemistry , Adsorption , Air , Surface PropertiesABSTRACT
The adsorption of gas-phase naphthalene and ozone on atmospheric air/ice interfaces was investigated using classical molecular dynamics (MD) simulations and potential of mean force (PMF) calculations. Naphthalene and ozone exhibit a strong preference to be adsorbed at the air/ice interface, rather than being dissolved into the bulk of the quasi-liquid layer (QLL) or incorporated into the ice crystals. When the air/ice interface is coated with increasing concentrations of naphthalene molecules, the QLL becomes thinner and surface adsorption of ozone is enhanced. Furthermore, ozone tends to adsorb on top of the naphthalene film, although significant penetration of ozone into this film is also observed. Naphthalene molecules tend to adopt a flat orientation on the air/ice interface. Less variation in the orientation was observed for lower concentrations of naphthalene, whereas variations in the ozone concentration do not affect the orientation of naphthalene molecules. However, as the concentration of ozone increases, most of the naphthalene molecules still prefer to stay close to the mobile water molecules in the QLL, but a significant fraction of the naphthalene molecules spends a considerable amount of time inside the thicker layer of ozone. We also monitored the number of contacts between naphthalene and ozone at the air/ice interface upon variations in the concentrations of these two species. These contacts were assumed to be proportional to the reaction rate between these two species. When the number of ozone molecules was held constant, the number of contacts showed a linear relationship to the number of naphthalene molecules. However, when the naphthalene concentration was held constant, for all systems we observed a linear relationship at low ozone concentrations and a plateau at high ozone concentrations.
ABSTRACT
Contaminated sediments provide the main source of mercury for methylation by bacteria in lakes and waterways. In situ capping has been used to remediate these sediments, but traditional reactive materials have very low affinity for Hg(II). This study investigated the mercury uptake by biogenic silica modified with L-cysteine, as a potential material to be used for in situ remediation technologies. The adsorbent was obtained from rice hull ash by extraction as sodium silicate and acid hydrolysis through the sol-gel process; it was then modified with L-cysteine by impregnation from aqueous solution. The unmodified and modified biogenic silica showed structural and chemical properties suitable for mercury sorption from aqueous medium. The cysteine affected the structural properties of the unmodified silica, decreasing the specific surface area and pore volume by eightfold. On the other hand, cysteine increased the silica adsorption capacity, resulting in mercury uptake similar to that of the unmodified silica. The Hg(ll) specific adsorption by unmodified and modified silica was 0.20 mmol/g and 0.19 mmol/g SiO2, respectively, from an aqueous solution of 1 mmol/L Hg(II). The pH range of 3-7did not have an effect on Hg(II) adsorption. However, the presence of chlorine, added as HgCl2, seems to have limited the mercury adsorption, especially at high concentrations of Hg(II). The mercury adsorbed on the silica surface could not be recovered using HCl even from concentrated solutions.
Subject(s)
Biological Products/chemistry , Cysteine/chemistry , Mercury/chemistry , Mercury/isolation & purification , Oryza/chemistry , Plant Components, Aerial/chemistry , Silicon Dioxide/chemistry , Ultrafiltration/methods , AbsorptionABSTRACT
Atmospheric-pressure photoionization (APPI) mass spectrometry benefits from the addition of an ionization-enhancing dopant such as benzene. A passive dopant-delivery system has therefore been designed for use with the orthogonal APPI source within a commercial liquid chromatographic instrument with mass spectrometric detector. By providing the dopant in the gas phase, the newly designed equipment avoids mixing problems and other difficulties associated with liquid dopant addition. The system is a simple and durable design that can reliably deliver virtually any dopant with sufficient vapor pressure in the temperature range of 20 to 120 degrees C. At the optimum dopant flow rate (10% of the mobile phase flow rate) for high-performance liquid chromatography with narrow-bore (2.1 mm) columns, the system allows for uninterrupted routine analysis for up to two weeks. The performance of the device has been evaluated with benzene as dopant and with a test mixture consisting of four polycyclic aromatic hydrocarbons (PAH): naphthalene, 9H-fluorene, anthracene, and phenanthrene. All four PAH can be detected with an excellent signal-to-noise ratio in the scanning mode and a limit of detection down to 0.42 ng on column (51 pg in single-ion monitoring mode). The concentration calibration curves are linear over a range of three orders of magnitude, with correlation coefficients greater than 0.99. The utilization of benzene as dopant not only increases the sensitivity significantly - 20-fold, compared with dopant-free operation - but the low m/z values of the background ions observed also allow for the effective quantitative and qualitative analysis of PAH.
ABSTRACT
The air-water interface in atmospheric water films of aerosols and hydrometeors (fog, mist, ice, rain, and snow) presents an important surface for the adsorption and reaction of many organic trace gases and gaseous reactive oxidants (hydroxyl radical (OH(.)), ozone (O(3)), singlet oxygen (O(2)((1)Delta(g))), nitrate radicals (NO(3)(.)), and peroxy radicals (RO(2)(.)). Knowledge of the air-water interface partition constant of hydrophobic organic species is necessary for elucidating the significance of the interface in atmospheric fate and transport. Various methods of assessing both experimental and theoretical values of the thermodynamic partition constant and adsorption isotherm are described in this review. Further, the reactivity of trace gases with gas-phase oxidants (ozone and singlet oxygen) at the interface is summarized. Oxidation products are likely to be more water-soluble and precursors for secondary organic aerosols in hydrometeors. Estimation of characteristic times shows that heterogeneous photooxidation in water films can compete effectively with homogeneous gas-phase reactions for molecules in the atmosphere. This provides further support to the existing thesis that reactions of organic compounds at the air-water interface should be considered in gas-phase tropospheric chemistry.
Subject(s)
Organic Chemicals/chemistry , Surface Properties , Water Pollutants, Chemical/chemistry , AdsorptionABSTRACT
As one of the major constituents of acid volatile sulfide (AVS) in anoxic sediments, mackinawite (FeS) is known for its ability to scavenge trace metals. The interaction between aqueous Hg(II) (added as HgCl(2)) and synthetic FeS was studied via batch sorption experiments conducted under anaerobic conditions. Due to the release of H(+) during formation of hydrolyzed Hg(II) species which is more reactive than Hg(2+) in surface adsorption, the equilibrium pH decreased with the increase in Hg(II)/FeS molar ratio. Counteracting the loss of FeS solids at lower pH, the maximum capacity for FeS to remove aqueous Hg(II) was approximately 0.75 mol Hg(II) (mol FeS)(-1). The comparison of X-ray power diffraction (XRPD) patterns of synthetic FeS sorbent before and after sorption showed that the major products formed from the interaction between FeS and the aqueous Hg(II) were metacinnabar, cinnabar, and mercury iron sulfides. With the addition of FeS at 0.4 g L(-1) to a 1 mM Hg(II) solution with an initial pH of 5.6, Fe(2+) release was approximately 0.77 mol Fe(2+) per mol Hg(II) removed, suggesting that 77% of Hg(II) was removed via precipitation reaction under these conditions, with 23% of Hg(II) removed by adsorption. Aeration does not cause significant release of Hg(II) into the water phase.
Subject(s)
Ferrous Compounds/chemistry , Mercury/analysis , Hydrogen-Ion Concentration , Kinetics , Microscopy, Electron, Scanning , Particle Size , Solutions/chemistryABSTRACT
Sediment samples were collected from two homes which were flooded in the wake of Hurricane Katrina in August 2005. The samples were analyzed for trace metals and semi-volatile organic compounds using techniques based on established EPA methods. The data showed higher concentrations of some metals and semi-volatile organic pollutants than reported in previous outdoor sampling events of soils and sediments. The Lake Pontchartrain sediments became resuspended during the hurricane, and this material subsequently was found in the residential areas of New Orleans following levee breaches. The clay and silt particles appear to be selectively deposited inside homes, and sediment contaminant concentrations are usually greatest within this fraction. Re-entry advisories based on outdoor sample concentration results may have under-predicted the exposure levels to homeowners and first responders. All contaminants found in the sediment sampled in this study have their origin in the sediments of Lake Pontchartrain and other localized sources.