A study on a broadband photodetector based on hybrid 2D copper oxide/reduced graphene oxide.

These days, photodetectors are a crucial part of optoelectronic devices, ranging from environmental monitoring to international communication systems. Therefore, fabricating these devices at a low cost but obtaining high sensitivity in a wide range of wavelengths is of great interest. This report introduces a simple solution-processed hybrid 2D structure of CuO and rGO for broadband photodetector applications. Particularly, 2D CuO acts as the active material, absorbing light to generate electron-hole pairs, while 2D rGO plays the role of a transport layer, driving charge carriers between two electrodes. Our device exhibits remarkable sensitivity to a wide wavelength range from 395 nm to 945 nm (vis-NIR region). Interestingly, our devices' responsivity and photoconductive gain were calculated (under 395 nm wavelength excitation) to be up to 8 mA W-1 and 28 fold, respectively, which are comparable values with previous publications. Our hybrid 2D structure between rGO and CuO enables a potential approach for developing low-cost but high-performance optoelectronic devices, especially photodetectors, in the future.

Persimmon preservation using edible coating of chitosan enriched with ginger oil and visualization of internal structure changes using X-ray computed tomography.

The incorporation of ginger oil (GO) influenced the physical, optical, and structural properties of the chitosan (CH) film including the decreases of moisture content (60.15 %), water solubility (35.37 %) and water vapor permeability (WVP) (32.79 %) and the increases of tensile strength (TS) (125 %), elongation at break (EAB) (2.74 %) and opacity (131.08 %). Antifungal capacity of the CH film was enhanced when GO was added to the film. The CH + GO film showed a less homogeneous surface that the presence of the oil droplets on the film surface. Moreover, the CH and CH + GO coatings reduced weight loss of persimmon by 14.87 %, and 21.13 %, respectively, compared to the control. Moisture content loss of the coated CH- and the coated CH + GO- persimmons was decreased by 1.94 % and 4.92 %, respectively, compared to that of the control persimmon. Furthermore, the CH and CH + GO coatings decreased in color changes, respiration rate, ethylene production, changes in pH and TSS, and remained firmness of persimmon during storage at 25 °C. In addition, X-ray CT images can be used to monitor internal changes and observe the tissue breakdown during storage period. The ΔGS value can be used as a predictor of persimmon internal qualities. Thus, the CH film containing GO can be applied as an active packaging material.

Improvement of cross-linked films based on chitosan/diepoxy-poly (ethylene glycol) incorporating trans-cinnamaldehyde essential oil: Preparation, properties, and application in banana storage.

In this study, development of bioactive coatings containing 1 % (w/v) chitosan (CS), 0.6 % (w/v) diepoxy-polyethylene glycol (PEG), and trans-cinnamaldehyde (CIN) was achieved. The physicochemical and biological properties of the coatings were investigated. The tensile strength, light transmission, water vapor permeability (WVP), and antibacterial properties were enhanced by the incorporation of CIN. The CIN-containing films appeared compact and rough, as observed using scanning electron microscopy (SEM) and atomic force microscopy (AFM). In addition, the quality attributes of the bananas were evaluated at room temperature for 24 days, and the results showed that the CS/PEG/CIN coating delayed the respiration peak, weight loss, sugar content loss, and maintained firmness, color, total soluble solids (TSS), titratable acid (TA), and the appearance of the bananas. Principal component analysis (PCA) revealed that the bioactive coating significantly affected the respiration rate and weight loss of bananas.

Machine learning-based exploration of molecular design descriptors for area-selective atomic layer deposition (AS-ALD) precursors.

CONTEXT: Area-selective atomic layer deposition (AS-ALD) is a thin film deposition technique developed using conventional ALD by considering the surface chemical nature of the substrate. Selecting appropriate precursors is a critical step in developing an efficient AS-ALD process with high deposition selectivity. However, the current efficiency of research on viable AS-ALD precursors is limited because of the absence of theoretical design rules for precursor chemical structures. In this study, our objective is to propose molecular design principle for precursors for AS-ALD, particularly focusing on achieving high deposition selectivity of oxides on diverse substrates. Current preliminary results suggest that ML-based prediction model may provide a fundamental molecular-level understanding of the reactivity of metal oxide precursors, that can be useful for efficient selection of suitable precursors for AS-ALD. METHODS: We employ density functional theory (DFT) calculations and machine learning (ML) techniques to analyze the relationship between the structure and the surface reactivity of the precursor. Considering DFT calculation data (M06L/def2-tzvp, Gaussian 09 and Orca 4.0) and information on precursor structures, artificial neural networks (ANN, neuralnet, R) are applied to identify critical descriptors of the AS-ALD process. Furthermore, we utilize this ANN model to predict precursor reactivity according to surface terminations.

Structural Characterization and Cytotoxic Activity Evaluation of Ulvan Polysaccharides Extracted from the Green Algae Ulva papenfussii.

Ulvan, a sulfated heteropolysaccharide with structural and functional properties of interest for various uses, was extracted from the green seaweed Ulva papenfussii. U. papenfussii is an unexplored Ulva species found in the South China Sea along the central coast of Vietnam. Based on dry weight, the ulvan yield was ~15% (w/w) and the ulvan had a sulfate content of 13.4 wt%. The compositional constitution encompassed L-Rhamnose (Rhap), D-Xylose (Xylp), D-Glucuronic acid (GlcAp), L-Iduronic acid (IdoAp), D-Galactose (Galp), and D-Glucose (Glcp) with a molar ratio of 1:0.19:0.35:0.52:0.05:0.11, respectively. The structure of ulvan was determined using High-Performance Liquid Chromatography (HPLC), Fourier Transform Infrared Spectroscopy (FT-IR), and Nuclear Magnetic Resonance spectroscopy (NMR) methods. The results showed that the extracted ulvan comprised a mixture of two different structural forms, namely ("A3s") with the repeating disaccharide [→4)-ß-D-GlcAp-(1→4)-α-L-Rhap 3S-(1→]n, and ("B3s") with the repeating disaccharide [→4)-α-L-IdoAp-(1→4)-α-L-Rhap 3S(1→]n. The relative abundance of A3s, and B3s was 1:1.5, respectively. The potential anticarcinogenic attributes of ulvan were evaluated against a trilogy of human cancer cell lineages. Concomitantly, Quantitative Structure-Activity Relationship (QSAR) modeling was also conducted to predict potential adverse reactions stemming from pharmacological interactions. The ulvan showed significant antitumor growth activity against hepatocellular carcinoma (IC50 ≈ 90 µg/mL), human breast cancer cells (IC50 ≈ 85 µg/mL), and cervical cancer cells (IC50 ≈ 67 µg/mL). The QSAR models demonstrated acceptable predictive power, and seven toxicity indications confirmed the safety of ulvan, warranting its candidacy for further in vivo testing and applications as a biologically active pharmaceutical source for human disease treatment.

Structural and functional characterization of the novel endo-α(1,4)-fucoidanase Mef1 from the marine bacterium Muricauda eckloniae.

Fucoidanases (EC 3.2.1.-) catalyze the hydrolysis of glycosidic bonds between fucose residues in fucoidans. Fucoidans are a compositionally and structurally diverse class of fucose-containing sulfated polysaccharides that are primarily found in brown seaweeds. Here, the structural characterization of a novel endo-α(1,4)-fucoidanase, Mef1, from the marine bacterium Muricauda eckloniae is presented, showing sequence similarity to members of glycoside hydrolase family 107. Using carbohydrate polyacrylamide gel electrophoresis and nuclear magnetic resonance analyses, it is shown that the fucoidanase Mef1 catalyzes the cleavage of α(1,4)-linkages between fucose residues sulfated on C2 in the structure [-3)-α-L-Fucp2S-(1,4)-α-L-Fucp2S-(1-]n in fucoidan from Fucus evanescens. Kinetic analysis of Mef1 activity by Fourier transform infrared spectroscopy revealed that the specific Mef1 fucoidanase activity (Uf) on F. evanescens fucoidan was 0.1 × 10-3 Uf µM-1. By crystal structure determination of Mef1 at 1.8 Šresolution, a single-domain organization comprising a (ß/α)8-barrel domain was determined. The active site was in an extended, positively charged groove that is likely to be designed to accommodate the binding of the negatively charged, sulfated fucoidan substrate. The active site of Mef1 comprises the amino acids His270 and Asp187, providing acid/base and nucleophile groups, respectively, for the hydrolysis of glycosidic bonds in the fucoidan backbone. Electron densities were identified for two possible Ca2+ ions in the enzyme, one of which is partially exposed to the active-site groove, while the other is very tightly coordinated. A water wire was discovered leading from the exterior of the Mef1 enzyme into the active site, passing the tightly coordinated Ca2+ site.

Associated factors and evaluation of interventional medication errors among inpatients in a hospital setting in Vietnam

This study aimed to determine factors associated with medication errors, and evaluate the results of interventions to reduce medication errors in inpatients treatment at Hoan My Minh Hai General Hospital, Vietnam. Methods: A single-blind, before-and-after and interventional study was conducted on 442 medical records of inpatients in the pre-intervention stage and 442 medical records of inpatients in the post-intervention stage at the Department of Pediatrics, Department of General Internal Medicine, Department of Cardiology - Endocrinology, Department of Surgery, Department of Obstetrics of Hoan My Minh Hai General Hospital from July 1, 2021, to March 31, 2022. Data were collected and processed using Excel 2016 and SPSS 26.0 software. Results: The medication errors rate decreased from 7.70% in the pre-intervention stage to 5.70% in the post-intervention stage, the difference was statistically significant (p<0.001). Medication errors before intervention occurred most often in the preparation and implementation stage (2.04%), after the intervention, the rate decreased to 1.81%. The replication stage had a high rate of medication errors (2.04%), after the intervention it decreased to 1.81%. The most common medication errors before intervention were wrong doses and wrong drugs (1.58%), after intervention, wrong dose errors rate decreased to 1.36%, the rate of wrong drug errors rate decreased to 1.13%. The total number of diseases ≥2 was significantly related to the occurrence of medication errors (p<0.05). Conclusion: Medication errors could occur at different stages of medication use processes. Pharmacist interventions appear to decrease the incidence of medication errors. (AU)

Silver decorated on cobalt ferrite nanoparticles as a reusable multifunctional catalyst for water treatment applications in non-radiation conditions.

In this investigation, cobalt ferrite nanoparticles (CFO NPs) were synthesized using a hydrothermal method. Then, silver nanoparticles (Ag NPs) were decorated on CFO NPs to form Ag/CFO NPs using jasmine extract as a reducing agent of Ag+ ions. The properties of Ag/CFO NPs were characterized by X-ray powder diffraction, field-emission scanning electron microscopy, energy-dispersive X-ray spectroscopy, Fourier-transform infrared spectroscopy, vibrating sample magnetometry, and catalytic tests in non-radiation conditions. The catalytic results indicated that the Ag/CFO NPs could activate peroxymonosulfate to generate sulfate radicals for the decomposition of different dyes such as methylene blue, methyl orange, and rhodamine B. For the Ag/CFO sample, Ag NPs validated the roles in dye adsorption, reduction of 4-nitrophenol, and improvement of antibacterial behavior. The growth inhibition activity of Ag/CFO NPs was observed against Pseudomonas aeruginosa (18.18 ± 2.48 mm) and Staphylococcus aureus (10.14 ± 0.72 mm). Furthermore, Ag/CFO NPs displayed good reusability after three consecutive runs. Therefore, Ag/CFO material is shown to be a potential multifunctional catalyst in wastewater treatment.

Low-temperature growth of MoS2 on polymer and thin glass substrates for flexible electronics.

Recent advances in two-dimensional semiconductors, particularly molybdenum disulfide (MoS2), have enabled the fabrication of flexible electronic devices with outstanding mechanical flexibility. Previous approaches typically involved the synthesis of MoS2 on a rigid substrate at a high temperature followed by the transfer to a flexible substrate onto which the device is fabricated. A recurring drawback with this methodology is the fact that flexible substrates have a lower melting temperature than the MoS2 growth process, and that the transfer process degrades the electronic properties of MoS2. Here we report a strategy for directly synthesizing high-quality and high-crystallinity MoS2 monolayers on polymers and ultrathin glass substrates (thickness ~30 µm) at ~150 °C using metal-organic chemical vapour deposition. By avoiding the transfer process, the MoS2 quality is preserved. On flexible field-effect transistors, we achieve a mobility of 9.1 cm2 V-1 s-1 and a positive threshold voltage of +5 V, which is essential for reducing device power consumption. Moreover, under bending conditions, our logic circuits exhibit stable operation while phototransistors can detect light over a wide range of wavelengths from 405 nm to 904 nm.

Absolute Stereochemistry and Cytotoxic Effects of Vismione E from Marine Sponge-Derived Fungus Aspergillus sp. 1901NT-1.2.2.

The metabolic profile of the Aspergillus sp. 1901NT-1.2.2 sponge-associated fungal strain was investigated using the HPLC MS technique, and more than 23 peaks in the HPLC MS chromatogram were detected. Only two minor peaks were identified as endocrocin and terpene derivative MS data from the GNPS database. The main compound was isolated and identified as known anthraquinone derivative vismione E. The absolute stereochemistry of vismione E was established for the first time using ECD and quantum chemical methods. Vismione E showed high cytotoxic activity against human breast cancer MCF-7 cells, with an IC50 of 9.0 µM, in comparison with low toxicity for normal human breast MCF-10A cells, with an IC50 of 65.3 µM. It was found that vismione E inhibits MCF-7 cell proliferation and arrests the cell cycle in the G1 phase. Moreover, the negative influence of vismione E on MCF-7 cell migration was detected. Molecular docking of vismione E suggested the IMPDH2 enzyme as one of the molecular targets for this anthraquinone derivative.

Ag/SiO2 nanoparticles stabilization with lignin derived from rice husk for antifungal and antibacterial activities.

Antibacterial materials have been developed for a long time but bacteria adapt very quickly and become resistant to these materials. This study focuses on the synthesis of a hybrid material system from lignin and silver/silica nanoparticles (Lig@Ag/SiO2 NPs) which were used against bacteria including Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) and inhibited the growth of the fungal Aspergillus flavus (A. flavus). The results showed that the spherical diameter of Lig@Ag/SiO2 NPs has narrow Gaussian distribution with a range from 15 nm to 40 nm in diameter. Moreover, there was no growth of E. coli in samples containing Lig@Ag/SiO2 NPs during 72-h incubation while colonies of S. aureus were only observed at high concentrations (106 CFU/mL) although both species of bacteria were able to thrive even at low bacterial concentration when they were exposed to Ag/SiO2 or lignin. For fungal resistance results, Lig@Ag/SiO2 NPs not only reduced mycelial growth but also inhibited sporulation in A. flavus, leading to decreasing the spreading of spores into the environment. This result represents a highly effective fungal growth inhibition of Lig@Ag/SiO2 NPs compared to lignin or Ag/SiO2, which could not inhibit the growth of sporulation.

Cytoprotective Polyketides from Sponge-Derived Fungus Lopadostoma pouzarii.

The new polyketides lopouzanones A and B, as well as the new 1-O-acetyl and 2-O-acetyl derivatives of dendrodochol B, were isolated from the sponge-derived marine fungus Lopadostoma pouzarii strain 168CLC-57.3. Moreover, six known polyketides, gliorosein, balticolid, dendrodolide G, dihydroisocoumarine, (-)-5-methylmellein, and dendrodochol B, were identified. The structures of the isolated compounds were determined by a combination of NMR and ESIMS techniques. The absolute configurations of the lopouzanones A and B were determined using the Mosher's method. The cytotoxicity of the isolated compounds against human prostate cancer cells PC-3 and normal rat cardiomyocytes H9c2 was investigated. Gliorosein showed weak DPPH radical-scavenging activity and in vitro cardioprotective effects toward rotenone toxicity and CoCl2-mimic hypoxia.

Fucose-Rich Sulfated Polysaccharides from Two Vietnamese Sea Cucumbers Bohadschia argus and Holothuria (Theelothuria) spinifera: Structures and Anticoagulant Activity.

Fucosylated chondroitin sulfates (FCSs) FCS-BA and FCS-HS, as well as fucan sulfates (FSs) FS-BA-AT and FS-HS-AT were isolated from the sea cucumbers Bohadschia argus and Holothuria (Theelothuria) spinifera, respectively. Purification of the polysaccharides was carried out by anion-exchange chromatography on DEAE-Sephacel column. Structural characterization of polysaccharides was performed in terms of monosaccharide and sulfate content, as well as using a series of non-destructive NMR spectroscopic methods. Both FCSs were shown to contain a chondroitin core [→3)-ß-d-GalNAc-(1→4)-ß-d-GlcA-(1→]n bearing sulfated fucosyl branches at O-3 of every GlcA residue in the chain. These fucosyl residues were different in pattern of sulfation: FCS-BA contained Fuc2S4S, Fuc3S4S and Fuc4S at a ratio of 1:8:2, while FCS-HS contained these residues at a ratio of 2:2:1. Polysaccharides differed also in content of GalNAc4S6S and GalNAc4S units, the ratios being 14:1 for FCS-BA and 4:1 for FCS-HS. Both FCSs demonstrated significant anticoagulant activity in clotting time assay and potentiated inhibition of thrombin, but not of factor Xa. FS-BA-AT was shown to be a regular linear polymer of 4-linked α-L-fucopyranose 3-sulfate, the structure being confirmed by NMR spectra of desulfated polysaccharide. In spite of considerable sulfate content, FS-BA-AT was practically devoid of anticoagulant activity. FS-HS-AT cannot be purified completely from contamination of some FCS. Its structure was tentatively represented as a mixture of chains identical with FS-BA-AT and other chains built up of randomly sulfated alternating 4- and 3-linked α-L-fucopyranose residues.

The Endo-α(1,3)-Fucoidanase Mef2 Releases Uniquely Branched Oligosaccharides from Saccharina latissima Fucoidans.

Fucoidans are complex bioactive sulfated fucosyl-polysaccharides primarily found in brown macroalgae. Endo-fucoidanases catalyze the specific hydrolysis of α-L-fucosyl linkages in fucoidans and can be utilized to tailor-make fucoidan oligosaccharides and elucidate new structural details of fucoidans. In this study, an endo-α(1,3)-fucoidanase encoding gene, Mef2, from the marine bacterium Muricauda eckloniae, was cloned, and the Mef2 protein was functionally characterized. Based on the primary sequence, Mef2 was suggested to belong to the glycosyl hydrolase family 107 (GH107) in the Carbohydrate Active enZyme database (CAZy). The Mef2 fucoidanase showed maximal activity at pH 8 and 35 °C, although it could tolerate temperatures up to 50 °C. Ca2+ was shown to increase the melting temperature from 38 to 44 °C and was furthermore required for optimal activity of Mef2. The substrate specificity of Mef2 was investigated, and Fourier transform infrared spectroscopy (FTIR) was used to determine the enzymatic activity (Units per µM enzyme: Uf/µM) of Mef2 on two structurally different fucoidans, showing an activity of 1.2 × 10-3 Uf/µM and 3.6 × 10-3 Uf/µM on fucoidans from Fucus evanescens and Saccharina latissima, respectively. Interestingly, Mef2 was identified as the first described fucoidanase active on fucoidans from S. latissima. The fucoidan oligosaccharides released by Mef2 consisted of a backbone of α(1,3)-linked fucosyl residues with unique and novel α(1,4)-linked fucosyl branches, not previously identified in fucoidans from S. latissima.

The Endo-α(1,4) Specific Fucoidanase Fhf2 From Formosa haliotis Releases Highly Sulfated Fucoidan Oligosaccharides.

Fucoidanases are endo-fucoidanases (also known as endo-fucanases) that catalyze hydrolysis of α-glycosidic linkages in fucoidans, a family of sulfated fucose-rich polysaccharides primarily found in the cell walls of brown seaweeds. Fucoidanases are promising tools for producing bioactive fucoidan oligosaccharides for a range of biomedical applications. High sulfation degree has been linked to high bioactivity of fucoidans. In this study, a novel fucoidanase, Fhf2, was identified in the genome of the aerobic, Gram-negative marine bacterium Formosa haliotis. Fhf2 was found to share sequence similarity to known endo-α(1,4)-fucoidanases (EC 3.2.1.212) from glycoside hydrolase family 107. A C-terminal deletion mutant Fhf2∆484, devoid of 484 amino acids at the C-terminus, with a molecular weight of approximately 46 kDa, was constructed and found to be more stable than the full-length Fhf2 protein. Fhf2∆484 showed endo-fucoidanase activity on fucoidans from different seaweed species including Fucus evanescens, Fucus vesiculosus, Sargassum mcclurei, and Sargassum polycystum. The highest activity was observed on fucoidan from F. evanescens. The Fhf2∆484 enzyme was active at 20-45°C and at pH 6-9 and had optimal activity at 37°C and pH 8. Additionally, Fhf2∆484 was found to be calcium-dependent. NMR analysis showed that Fhf2∆484 catalyzed hydrolysis of α(1,4) linkages between L-fucosyl moieties sulfated on C2 (similar to Fhf1 from Formosa haliotis), but Fhf2∆484 in addition released oligosaccharides containing a substantial amount of 2,4-disulfated fucose residues. The data thus suggest that the Fhf2∆484 enzyme could be a valuable candidate for producing highly sulfated oligosaccharides applicable for fucoidan bioactivity investigations.

Development of a novel polycaprolactone based composite membrane for periodontal regeneration using spin coating technique.

Guided bone regeneration (GBR) is known to prevent the development of soft tissue on the defect sites as well as support the new bone formation on the other end. In the present study, we developed a multilayer biodegradable membrane for GBR applications. The multilayer membrane is primarily composed of ß-tricalcium phosphate (TCP), polycaprolactone (PCL), and hyaluronic acid (HA), prepared by the spin-coating method. The triple layer system has PCL-TCP composite layer on top, a PCL layer in the middle, and PCL-HA as the bottom layer. The characterization of the PCL-TCP/PCL/PCL-HA by various techniques such as SEM, EDS, XRD, and FT-IR supported the uniform formation of the triple layers with an overall thickness of ∼ 72 µm. Multilayer composite membrane showed excellent physical parameters; neutral pH, high hydrophilicity, high swelling rate, low degradation rate, and high apatite formation after immersion in simulated body fluid (SBF) for 14 days. The multilayer membrane also exhibited biocompatibility which is evident by MTT assay and confocal images. The results suggested that the multilayer composite membrane has the potential for GBR applications.

Survey of knowledge, attitude and practice of healthcare professionals on dengue transmission, diagnosis and clinical classification.

BACKGROUND: To investigate the knowledge, attitudes, and practices of the healthcare professionals (HCPs) including physicians and nurses regarding dengue transmission, diagnosis and clinical classification using the warning signs of World Health Organization (WHO) 2009 classification. RESULTS: Out of 471 respondents from three countries, 80.9% of physicians and 74% of nurses did not receive previous training regarding the dengue infection. The majority of respondents could identify the primary dengue vector (86%), while only a third of HCPs knew the biting time of dengue mosquitoes. Only half of our respondents knew about immunity induced by serotypes; Moreover, half of our participants could determine the diagnostic tests. On the other hand, about 90% of the respondents took responsibility for talking to the patients about preventive measures. Our respondents also showed wide variations in definition of warning signs listed in the WHO 2009 classification. Multivariate analysis linked the impact of different cofactors including prior training on dengue infection, type of profession, frequency of taking care of dengue patients and country on how HCPs defined these warning signs. CONCLUSIONS: This study could declare the variation in employing the warning signs listed in the WHO 2009 classification. We have figured that most of the HCPs did not take prior training on the dengue viral infection; Also, we found gaps in the knowledge regarding various topics in dengue fever. This paper recommends the gathering of efforts to establish the proper knowledge of dengue infection and the warning signs listed by the WHO.

Development of a highly sensitive sensor chip using optical diagnostic based on functionalized plasmonically active AuNPs.

Measuring solution concentration plays an important role in chemical, biochemical, clinical diagnosis, environmental monitoring, and biological analyses. In this work, we develop a transmission-mode localized surface plasmon resonance sensor chip system and convenient method which is highly efficient, highly sensitive for detection sensing using multimode fiber. The plasmonically active sensor's surface AuNPs with high-density NPs were decorated onto 1 cm sensing length of various clad-free fiber in the form of homogeneous monolayer utilizing a self-assembly process for immobilization of the target molecule. The carboxyl bond is formed through a functional reaction on the sensor head. Using the significance in the refractive index difference and numerical aperture, which is caused by a variation in the concentration of measuring bovine serum albumin (BSA) protein which can be accurately measured by the output signal. The refractive index variation of the medium analyte layer can be converted to signal output power change at the He-Ne wavelength of 632.8 nm. The sensor detection limit was estimated to be 0.075 ng ml-1for BSA protein which shows high sensitivity compared to other types of label-free optical biosensors. This also leads to a possibility of finding the improvement in the sensitivity label-free biosensors. The conventional method should allow multimode fiber biosensors to become a possible replacement for conventional biosensing techniques based on fluorescence.

Novel biopolymer-based nanocomposite food coatings that exhibit active and smart properties due to a single type of nanoparticles.

We used nanoparticles which possess simultaneously active (antimicrobial, UV-protective and antioxidant) and smart (temperature sensing) properties. The nanoparticles (2Rh = 450 nm, PDI = 0.118 ± 0.014, ζ-potential = 21 mV and Tg = 8 ± 1 °C) are based on polyethylene glycol (PEG)/methyl cellulose (MC) core with anthocyanidin and sodium acetate, and chitosan/gallotannin-based shell. The core of nanoparticles acts as a temperature indicator, changing its color from colorless into deep purple at 8 °C, while the shell provides antimicrobial (due to chitosan), UV-protective and antioxidant (due to gallotannin) effects. We incorporated these nanoparticles into the chitosan matrix. The coatings demonstrated improved mechanical and barrier properties compared with the pure chitosan coating. The elaborated coatings pronouncedly improve the shelf-life of Ricotta cheese. Moreover, they serve as thermo indicators, which warn about cheese storage at an unacceptable temperature. Thus, we developed new coatings in which all properties are enabled by a single type of nanoparticles.

Anti-Neuroinflammatory Agent, Restricticin B, from the Marine-Derived Fungus Penicillium janthinellum and Its Inhibitory Activity on the NO Production in BV-2 Microglia Cells.

A new compound containing a triene, a tetrahydropyran ring and glycine ester functionalities, restricticin B (1), together with four known compounds (2-5) were obtained from the EtOAc extract of the marine-derived fungus Penicillium janthinellum. The planar structure of 1 was determined by detailed analyses of MS, 1D and 2D NMR data. The relative and absolute configurations of 1 were established via the analyses of NOESY spectroscopy data, the comparison of optical rotation values with those of reported restricticin derivatives and electronic circular dichroism (ECD). All the compounds were screened for their anti-neuroinflammatory effects in lipopolysaccharide (LPS)-induced BV-2 microglia cells. Restricticin B (1) and N-acetyl restricticin (2) exhibited anti-neuroinflammatory effects by suppressing the production of pro-inflammatory mediators in activated microglial cells.