Synthesis, Structural and Physicochemical Properties of Water-Soluble Mixed-Ligand Diruthenium Complexes Containing Anilinopyridinate Bridging Ligands.

A series of water-soluble Ru25+ complexes of the type Ru2(O2CCH3)3(L)Cl where L = 2,3,4,5,6-F5ap, 2,4,6-F3ap, 2-Fap, ap, 2-Meap, 2,6-Me2ap, or 2,4,6-Me3ap, where ap is the anilinopyridinate anion, have been characterized as to their structural and physicochemical properties in H2O and DMSO. Five of the newly synthesized complexes were structurally characterized, and the Ru-Cl bond lengths range from 2.477 to 2.544 Å while the Ru-Ru bond lengths range from 2.2838 to 2.2935 Å. The UV-vis spectra of each compound are characterized by three absorption bands in both H2O and DMSO, the intensity and position of which vary with both the type of bridging ligand and the solvent. The seven examined Ru25+ complexes exist as 1:1 electrolytes in water, and each undergoes a reversible one-electron reduction assigned to Ru25+/Ru24+ in both investigated solvents. A second irreversible reduction attributed to Ru24+/Ru23+ is also observed for each compound at more negative potentials in DMSO. A linear free energy relationship exists between the sum of the Hammett substituent constants (Σσ) on the ap-type bridging ligand and the wavenumber of an absorption band for the Ru25+ complexes. A linear relationship is also seen between Σσ and measured E1/2 values for the Ru25+/Ru24+ process in water containing 0.1 M KCl, but little to no effect is seen between the specific bridging ligand and the structural features of the investigated compounds.

Impact of substituents and nonplanarity on nickel and copper porphyrin electrochemistry: first observation of a Cu(II)/Cu(III) reaction in nonaqueous media.

Electrochemical studies of the oxidation of dodecasubstituted and highly nonplanar nickel porphyrins in a noncoordinating solvent have previously revealed the first nickel(III) porphyrin dication. Herein, we investigate if these nonplanar porphyrins can also be used to detect the so far unobserved copper(III) porphyrin dication. Electrochemical studies of the oxidation of (DPP)Cu and (OETPP)Cu show three processes, the first two of which are macrocycle-centered to give the porphyrin dication followed by a Cu(II)/Cu(III) process at more positive potential. Support for the assignment of the Cu(II)/Cu(III) process comes from the linear relationships observed between E1/2 and the third ionization potential of the central metal ions for iron, cobalt, nickel, and copper complexes of (DPP)M and (OETPP)M. In addition, the oxidation behavior of additional nonplanar nickel porphyrins is investigated in a noncoordinating solvent, with nickel meso-tetraalkylporphyrins also being found to form nickel(III) porphyrin dications. Finally, examination of the nickel meso-tetraalkylporphyrins in a coordinating solvent (pyridine) reveals that the first oxidation becomes metal-centered under these conditions, as was previously noted for a range of nominally planar porphyrins.

Effect of axial ligands on the spectroscopic and electrochemical properties of diruthenium compounds.

Three related diruthenium complexes containing four symmetrical anionic bridging ligands were synthesized and characterized as to their electrochemical and spectroscopic properties. The examined compounds are represented as Ru2(dpb)4Cl, Ru2(dpb)4(CO), and Ru2(dpb)4(NO) in the solid state, where dpb = diphenylbenzamidinate anion. Different forms of Ru2(dpb)4Cl are observed in solution depending on the utilized solvent and the counteranion added to solution. Each Ru2(5+) form of the compound undergoes multiple redox processes involving the dimetal unit. The reversibility as well as potentials of these diruthenium-centered electrode reactions depends upon the solvent and the bound axial ligand. The Ru2(5+/4+) and Ru2(5+/6+) processes of Ru2(dpb)4Cl were monitored by UV-vis spectroscopy in both CH2Cl2 and PhCN. A conversion of Ru2(dpb)4Cl to [Ru2(dpb)4(CO)](+) was also carried out by simply bubbling CO gas through a CH2Cl2 solution of Ru2(dpb)4Cl at room temperature. The chemically generated [Ru2(dpb)4(CO)](+) complex undergoes several electron transfer processes in CH2Cl2 containing 0.1 M TBAClO4 under a CO atmosphere, and the same reactions were seen for a chemically synthesized sample of Ru2(dpf)4(CO) in CH2Cl2, 0.1 M TBAClO4 under a N2 atmosphere, where dpf = N,N'-diphenylformamidinate anion. Ru2(dpb)4(NO) undergoes two successive one-electron reductions and a single one-electron oxidation, all of which involve the diruthenium unit. The CO and NO adducts of Ru2(dpb)4 were further characterized by FTIR spectroelectrochemistry, and the IR spectral data of these compounds are discussed in light of results for previously characterized Ru2(dpf)4(CO) and Ru2(dpf)4(NO) derivatives under similar solution conditions.

Synthesis, structure, and electrochemical characterization of a mixed-ligand diruthenium(III,II) complex with an unusual arrangement of the bridging ligands.

A mixed-ligand metal-metal bonded diruthenium complex having the formula Ru(2)(2,4,6-(CH(3))(3)ap)(3)(O(2)CCH(3))Cl where ap is the anilinopyridinate anion was synthesized from the reaction of Ru(2)(O(2)CCH(3))(4)Cl and H(2,4,6-(CH(3))(3)ap), after which the isolated product was structurally, spectroscopically and electrochemically characterized. The crystal structure reveals an unusual arrangement of the bridging ligands around the dimetal unit where one ruthenium atom is coordinated to one anilino and two pyridyl nitrogen atoms while the other ruthenium atom is coordinated to one pyridyl and two anilino nitrogen atoms. To our knowledge, Ru(2)(2,4,6-(CH(3))(3)ap)(3)(O(2)CCH(3))Cl is the only example of a mixed-ligand diruthenium complex of the type [Ru(2)L(3)(O(2)CCH(3))](+), where L is an unsymmetrical anionic bridging ligand that has been structurally characterized with a "(2,1)" geometric conformation of the bridging ligands, all others being "(3,0)". The initial Ru(2)(5+) compound in CH(2)Cl(2) or CH(3)CN containing 0.1 M tetra-n-butylammonium perchlorate (TBAP) undergoes up to four one-electron redox processes involving the dimetal unit. The Ru(2)(5+/4+) and Ru(2)(5+/6+) processes were characterized under N(2) using thin-layer UV-visible spectroelectrochemistry and this data is compared to UV-visible spectral changes obtained during similar electrode reactions for related diruthenium compounds having the formula Ru(2)L(4)Cl or Ru(2)L(3)(O(2)CCH(3))Cl where L is an anionic bridging ligand. Ru(2)(2,4,6-(CH(3))(3)ap)(3)(O(2)CCH(3))Cl was also examined by UV-visible and FTIR spectroelectrochemistry under a CO atmosphere and two singly reduced Ru(2)(4+) species, [Ru(2)(2,4,6-(CH(3))(3)ap)(3)(O(2)CCH(3))(CO)Cl](-) and Ru(2)(2,4,6-(CH(3))(3)ap)(3)(O(2)CCH(3))(CO) were in situ generated for further characterization. The CO-bound complexes could be further reduced and exhibited additional reductions to their Ru(2)(3+) and Ru(2)(2+) oxidation states.

Electrochemical and spectroscopic characterization of a series of mixed-ligand diruthenium compounds.

The electrochemistry and spectroelectrochemistry of a novel series of mixed-ligand diruthenium compounds were examined. The investigated compounds having the formula Ru(2)(CH(3)CO(2))(x)(Fap)(4-x)Cl where x = 1-3 and Fap is 2-(2-fluoroanilino)pyridinate anion were made from the reaction of Ru(2)(CH(3)CO(2))(4)Cl with 2-(2-fluoroanilino)pyridine (HFap) in refluxing methanol. The previously characterized Ru(2)(Fap)(4)Cl as well as the three newly isolated compounds represented as Ru(2)(CH(3)CO(2))(Fap)(3)Cl (1), Ru(2)(CH(3)CO(2))(2)(Fap)(2)Cl (2), and Ru(2)(CH(3)CO(2))(3)(Fap)Cl (3) possess three unpaired electrons with a Ru(2)(5+) dimetal core. Complexes 1 and 2 have well-defined Ru(2)(5+/4+) and Ru(2)(5+/6+) redox couples in CH(2)Cl(2), but 3 exhibits a more complicated electrochemical behavior due to equilibria involving association or dissociation of the anionic chloride axial ligand on the initial and oxidized or reduced forms of the compound. The E(1/2) values for the Ru(2)(5+/4+) and Ru(2)(5+/6+) processes vary linearly with the number of CH(3)CO(2)(-) bridging ligands on Ru(2)(CH(3)CO(2))(x)(Fap)(4-x)Cl and plots of reversible half-wave potentials vs the number of acetate groups follow linear free energy relationships with the largest substituent effect being observed for the oxidation. The major UV-visible band of the examined compounds in their neutral Ru(2)(5+) form is located between 550 and 800 nm in CH(2)Cl(2) and also varies linearly with the number of CH(3)CO(2)(-) ligands on Ru(2)(CH(3)CO(2))(x)(Fap)(4-x)Cl. The electronic spectra of the singly oxidized and singly reduced forms of each diruthenium species were characterized by UV-visible spectroelectrochemistry in CH(2)Cl(2).

Synthesis and characterization of (3,1) Ru2(F3ap)4(NCS) and (3,1) Ru2(F3ap)3(F2Oap)(NCS) where F3ap is the 2-(2,4,6-trifluoroanilino)pyridinate anion.

Two isothiocyanate diruthenium complexes, (3,1) Ru2(F3ap)4(NCS) 1 and (3,1) Ru2(F3ap)3(F2Oap)(NCS)2 (where F3ap=2,4,6-trifluoroanilinopyridinate anion), were synthesized from (3,1) Ru2(F3ap)4Cl and SCN(-) under different experimental conditions. Each compound was examined as to its structural, electrochemical, spectroscopic, and magnetic properties. Compound 1 contains three unpaired electrons as its parent compound but 2 is diamagnetic. The X-ray molecular structures of 1 and 2 reveal that the NCS group is coordinated to the dimetal unit via nitrogen in both compounds with the Ru-N-C bond angle being 176.5 degrees for 1 and 166.0 degrees for 2. An elongation of the Ru-Ru bond distance and a shortening of both the Ru-Np (p=pyridyl) and the Ru-Na (a=anilino) bond lengths is seen upon going from (3,1) Ru2(F3ap)4Cl to 2, but the conversion of (3,1) Ru2(F3ap)4Cl to 1 does not affect significantly structural features of the Ru2(L) 4 framework. Compound 1 undergoes one reduction and two oxidations, all three of which involve the dimetal core, whereas 2 undergoes two metal-centered reductions, one metal-centered oxidation, and one ligand-based oxidation due to the presence of the F2Oap ligand on the Ru2 complex. The reactivity of 1 with SCN(-) was also investigated.

Synthesis, characterization, and electrochemistry of diruthenium(III,II) and monoruthenium(III) complexes containing pyridyl-substituted 2-anilinopyridinate ligands.

Reaction of the metal-metal bonded complex Ru(2)(O2CCH3)4Cl with 2-anilino-4-methylpyridine leads to the (3,1) isomer of the diruthenium(III,II) complex Ru2(ap-4-Me)4Cl, 1 while the same reaction with 2-anilino-6-methylpyridine gives the monoruthenium(III) derivative Ru(ap-6-Me)3, 2. Both compounds were examined as to their structural, electrochemical, and UV-visible properties, and the data were then compared to that previously reported for (4,0) Ru2(2-Meap)4Cl and other (3,1) isomers of Ru2(L)4Cl with similar anionic bridging ligands. ESR spectroscopy indicates that the monoruthenium derivative 2 contains low-spin Ru(III), and the presence of a single ruthenium atom is confirmed by an X-ray structure of the compound. The combined electrochemical and UV-vis spectroelectrochemical data indicate that the diruthenium complex 1 is easily converted to its Ru2(4+) and Ru2(6+) forms upon reduction or oxidation by one electron while the monoruthenium derivative 2 also undergoes metal-centered redox processes to give Ru(II) and Ru(IV) complexes under the same solution conditions. The reactivity of 1 with CO and CN- was also examined.

Electrochemical and spectroelectrochemical characterization of Ru(2)(4+) and Ru(2)(3+) complexes under a CO atmosphere.

Eleven different Ru(2)(4+) and Ru(2)(3+) derivatives are characterized by thin-layer FTIR and UV-visible spectroelectrochemistry under a CO atmosphere. These compounds, which were in-situ electrogenerated from substituted anilinopyridine complexes with a Ru(2)(5+) core, are represented as Ru(2)(L)(4)Cl where L = 2-CH(3)ap, ap, 2-Fap, 2,3-F(2)ap, 2,4-F(2)ap, 2,5-F(2)ap, 3,4-F(2)ap, 3,5-F(2)ap, 2,4,6-F(3)ap, or F(5)ap. The Ru(2)(5+) complexes do not axially bind CO while mono- and bis-CO axial adducts are formed for the Ru(2)(4+) and Ru(2)(3+) derivatives, respectively. Six of the eleven investigated compounds exist in a (4,0) isomeric form while five adopt a (3,1) geometric conformation. These two series of compounds thus provide a large enough number of derivatives to examine trends and differences in the spectroscopic data of the two types of isomers in their lower Ru(2)(4+) and Ru(2)(3+) oxidation states. UV-visible spectra of the Ru(2)(4+) derivatives and IR spectra of the Ru(2)(3+) complexes under CO are both isomer dependent, thus suggesting that these data can be used to reliably predict the isomeric form, i.e., (3,1) or (4,0), of diruthenium complexes containing four unsymmetrical substituted anilinopyridinate bridging ligands; this was confirmed by X-ray crystallographic data for seven compounds whose structures were available.

Substituent and isomer effects on structural, spectroscopic, and electrochemical properties of dirhodium(III,II) complexes containing four identical unsymmetrical bridging ligands.

Substituent and isomer effects on the structural, spectroscopic, (UV-visible and ESR) and electrochemical properties of dirhodium(III,II) complexes containing four identical unsymmetrical bridging ligands are reported for seven related compounds of the type Rh(2)(L)(4)Cl where L = 2-(2-fluoroanilino)pyridinate (2-Fap), 2-(2,6-difluoroanilino)pyridinate (2,6-F(2)ap), 2-(2,4,6-trifluoroanilino)pyridinate (2,4,6-F(3)ap), or 2-(2,3,4,5,6-pentafluoroanilino)pyridinate (F(5)ap) anion. Rh(2)(2-Fap)(4)Cl exists only in a (4,0) isomeric conformation while Rh(2)(2,6-F(2)ap)(4)Cl, Rh(2)(2,4,6-F(3)ap)(4)Cl, and Rh(2)(F(5)ap)(4)Cl exist as both (4,0) and (3,1) isomers. It had earlier been demonstrated that Rh(2)(L)(4)Cl complexes can adopt different geometric conformations of the bridging ligands, but the current study provides the first example where two geometric isomers of Rh(2)(5+) complexes are obtained for one compound using the same synthetic procedure. The synthesis, structural, spectroscopic, and/or electrochemical properties of (3,1) Rh(2)(2,6-F(2)ap)(4)CN and (4,0) Rh(2)(2,4,6-F(3)ap)(4)(C triple bond C)(2)Si(CH(3))(3) are also reported and the data on these compounds is discussed in light of their parent complexes, (3,1) Rh(2)(2,6-F(2)ap)(4)Cl and (4,0) Rh(2)(2,4,6-F(3)ap)(4)Cl.

Solvent effects on the electrochemistry and spectroelectrochemistry of diruthenium complexes. Studies of Ru2(L)4Cl where L=2-CH3ap, 2-Fap, and 2,4,6-F3ap, and ap is the 2-anilinopyridinate anion.

Three Ru2(5+) diruthenium complexes, (4,0) Ru2(2-CH3ap)4Cl, (3,1) Ru2(2-Fap)4Cl, and (3,1) Ru2(2,4,6-F3ap)4Cl where ap is the 2-anilinopyridinate anion, were examined as to their electrochemical and spectroelectrochemical properties in five different nonaqueous solvents (CH2Cl2, THF, PhCN, DMF, and DMSO). Each compound undergoes a single one-electron metal-centered oxidation in THF, DMF, and DMSO and two one-electron metal-centered oxidations in CH2Cl2 and PhCN. The three diruthenium complexes also undergo two reductions in each solvent except for CH2Cl2, and these electrode processes are assigned as Ru2(5+/4+) and Ru2(4+/3+). Each neutral, singly reduced, and singly oxidized species was characterized by UV-vis thin-layer spectroelectrochemistry, and the data are discussed in terms of the most probable electronic configuration of the compound in solution. The three neutral complexes contain three unpaired electrons as indicated by magnetic susceptibility measurements using the Evans method (3.91-3.95 muB), and the electronic configuration is assigned as sigma2pi4delta2pi(*2)delta, independent of the solvent. The three singly oxidized compounds have two unpaired electrons in CD2Cl2, DMSO-d6, or CD3CN (2.65-3.03 muB), and the electronic configuration is here assigned as sigma2pi4delta2pi(*2). The singly reduced compound also has two unpaired electrons (2.70-2.80 muB) in all three solvents, consistent with the electronic configuration sigma2pi4delta2pi(*2)delta(*2) or sigma2pi4delta2pi(*3)delta*. Finally, the overall effect of solvent on the number of observed redox processes is discussed in terms of solvent binding, and several formation constants were calculated.

Cyanide adducts on the diruthenium core of [Ru2(L)4](+) (L = ap, CH3ap, Fap, or F3ap). Electronic properties and binding modes of the bridging ligand.

The products of the reaction between CN(-) and four different diruthenium complexes of the type Ru(2)(L)(4)Cl where L = 2-CH(3)ap (2-(2-methylanilino)pyridinate anion), ap (2-anilinopyridinate anion), 2-Fap (2-(2-fluoroanilino)pyridinate anion), or 2,4,6-F(3)ap (2-(2,4,6-trifluoroanilino)pyridinate anion) are reported. Mono- and/or dicyano adducts of the type Ru(2)(L)(4)(CN) and Ru(2)(L)(4)(CN)(2) are found exclusively as reaction products when either the 2-CH(3)ap or the ap derivative is reacted with CN(-), but diruthenium complexes with formulations of the type Ru(2)(F(x)ap)(3)[mu-(o-NC)F(x-1)ap](mu-CN) or Ru(2)(F(x)ap)(4)(mu-CN)(2) (x = 1 or 3) are also generated when Ru(2)(Fap)(4)Cl or Ru(2)(F(3)ap)(4)Cl is reacted with CN(-). More specifically, four products formulated as Ru(2)(Fap)(4)(CN), Ru(2)(Fap)(4)(CN)(2), Ru(2)(Fap)(3)[mu-(o-NC)ap](mu-CN), and Ru(2)(Fap)(4)(mu-CN)(2) can be isolated from a reaction of CN(-) with the Fap derivative, but the exact type and yield of these compounds depend on the temperature at which the experiment is carried out. In the case of the F(3)ap derivative, the only diruthenium complex isolated from the reaction mixture has the formulation Ru(2)(F(3)ap)(3)[mu-(o-NC)F(2)ap](mu-CN) and this compound has structural, electrochemical, and spectroscopic properties quite similar to that of previously characterized Ru(2)(F(5)ap)[mu-(o-NC)F(4)ap](mu-CN). Both the mono- and dicyano derivatives synthesized in this study possess the isomer type of their parent chloro complexes. The Ru-Ru bond lengths of Ru(2)(ap)(4)(CN) and Ru(2)(2-CH(3)ap)(4)(CN) are longer than those of Ru(2)(ap)(4)Cl and Ru(2)(CH(3)ap)(4)Cl, respectively, and this is accounted for by the strong sigma-donor properties of the CN(-) ligand as compared to Cl(-). The Ru-C bonds in Ru(2)(ap)(4)(CN)(2) are significantly shorter than those in Ru(2)(ap)(4)(CN), thus revealing a greatly enhanced Ru-CN interaction in the dicyano adduct, a result which is also indicated by the fact that nu(CN) in Ru(2)(ap)(4)(CN)(2) is 50 cm(-1) higher than nu(CN) in Ru(2)(ap)(4)(CN). Although both (4,0) Ru(2)(ap)(4)(CN)(2) and (3,1) Ru(2)(Fap)(4)(CN)(2) possess the same formulation, there are clear structural differences between the two complexes and this can be explained by the fact that the two cyano derivatives possess a different binding symmetry of the bridging ligands. Each mono- and dicyano adduct was electrochemically investigated in CH(2)Cl(2) containing TBAP as supporting electrolyte. Ru(2)(ap)(4)(CN), Ru(2)(CH(3)ap)(4)(CN), and Ru(2)(Fap)(4)(CN) undergo one reduction and two oxidations. The two dicyano adducts of the ap and Fap derivatives are characterized by two reductions and one oxidation. The potentials of these processes are all negatively shifted in potential by 400-720 mV with respect to half-wave potentials for the same redox couples of the monocyano derivatives, with the exact value depending upon the specific redox reaction.

Factors affecting the electrochemical and spectroelectrochemical properties of diruthenium(III,II) complexes containing four identical unsymmetrical bridging ligands.

Factors affecting the electrochemical and spectroelectrochemical properties of diruthenium(III,II) complexes containing four unsymmetrical bridging ligands are reported for seven related compounds which were isolated in one or two of the four possible isomeric forms. The investigated compounds are represented as Ru(2)(2-CH(3)ap)(4)Cl, Ru(2)(2,5-F(2)ap)(4)Cl, Ru(2)(2,6-F(2)ap)(4)Cl, and Ru(2)(2,4,6-F(3)ap)(4)Cl where 2-CH(3)ap, 2,5-F(2)ap, 2,6-F(2)ap, and 2,4,6-F(3)ap are, respectively, the 2-(2-methylanilino)pyridinate anion, the 2-(2,5-difluoroanilino)pyridinate anion, the 2-(2,6-difluoroanilino)pyridinate anion, and the 2-(2,4,6-trifluoroanilino)pyridinate anion. Ru(2)(2-CH(3)ap)(4)Cl and Ru(2)(2,5-F(2)ap)(4)Cl exist only in a (4,0) conformation while Ru(2)(2,4,6-F(3)ap)(4)Cl is present in both (3,1) and (4,0) isomeric forms. Ru(2)(2,6-F(2)ap)(4)Cl also exists in two isomeric forms, but only the (3,1) isomer was generated in sufficient quantities to be isolated and structurally characterized. This series of seven closely related metal-metal bonded complexes thus provides the first possibility to systematically examine how differences in position and number of the electron-donating or electron-withdrawing groups on the anionic bridging ligands might be related to the electronic properties and structural features of the compound as well as the type and number of geometric isomers which are formed. Each diruthenium derivative undergoes three one-electron transfers in CH(2)Cl(2) containing 0.1 M tetra-n-butylammonium perchlorate (TBAP). The first reduction and first oxidation products were characterized by thin-layer UV-vis spectroelectrochemistry, and the spectroscopic data, along with E(1/2) values, were then related via linear free energy relationships to the type of isomer and/or position of the electron-donating or electron-withdrawing substituents on the anionic ap bridge. The electrogenerated Ru(2)(6+) and Ru(2)(4+) forms of the compounds were assigned on the basis of electrochemical and UV-vis spectroscopic data as having the electronic configuration sigma(2)pi(4)delta(2)pi(2) and sigma(2)pi(4)delta(2)pi(3)delta, respectively, and seemed to be independent of the isomer type ((3,1) or (4,0)). The spectral and electrochemical properties of the compounds both vary substantially as a function of the isomer type, but this is not reflected in the structural features of the compounds which are within the range of what is seen for other Ru(2)(5+) species described in the literature. The Ru-Ru bond lengths of the four structurally characterized (4,0) isomers of the ap complexes range from 2.275 to 2.296 A while those of the three structurally characterized (3,1) isomers of ap derivatives fall in the range 2.284-2.286 A and show no significant difference among the three compounds. The Ru-Cl bond lengths of the (3,1) isomers do not vary significantly with the bridging ligand and range from 2.458 to 2.471 A whereas those of the (4,0) isomers range from 2.437 to 2.487 A and show larger variations among the compounds. The Ru-Ru-Cl bond angle is virtually independent of the bridging ligand in the case of the (4,0) isomers but decreases with the electron-withdrawing effect of the substituent in the case of the (3,1) isomers.

Influence of electronic and structural effects on the oxidative behavior of nickel porphyrins.

With the aim of better understanding the electronic and structural factors which govern electron-transfer processes in porphyrins, the electrochemistry of 29 nickel(II) porphyrins has been examined in dichloromethane containing either 0.1 M tetra-n-butylammonium perchlorate (TBAP) or tetra-n-butylammonium hexafluorophosphate (TBAPF(6)) as supporting electrolyte. Half-wave potentials for the first oxidation and first reduction are only weakly dependent on the supporting electrolyte, but E(1/2) for the second oxidation varies considerably with the type of supporting electrolyte. E(1/2) values for the first reduction to give a porphyrin pi-anion radical are effected in large part by the electronic properties of the porphyrin macrocycle substituents, while half-wave potentials for the first oxidation to give a pi-cation radical are affected by the substituents as well as by nonplanar deformations of the porphyrin macrocycle. The potential difference between the first and second oxidations (Delta/Ox(2) - Ox(1)/) is highly variable among the 29 investigated compounds and ranges from 0 mV (two overlapped oxidations) to 460 mV depending on the macrocycle substituents and the anion of the supporting electrolyte. The magnitude of Delta/Ox(2) - Ox(1)/ is generally smaller for compounds with very electron-withdrawing substituents and when TBAP is used as the supporting electrolyte. This behavior is best explained in terms of differences in the binding strengths of anions from the supporting electrolyte (ClO(4)(-) or PF(6)(-)) to the doubly oxidized species. A closer analysis suggests two factors which are important in modulating Delta/Ox(2) - Ox(1)/ and thus the binding affinity of the anion to the porphyrin dication. One is the type of pi-cation radical (a proxy for the charge distribution in the dication), and the other is the conformation of the porphyrin macrocycle (either planar or nonplanar). These findings imply that the redox behavior of porphyrins can be selectively tuned to display separate or overlapped oxidation processes.

Synthesis and Electrochemical Studies of a Series of Fluorinated Dodecaphenylporphyrins.

Dodecaphenylporphyrins with varying degrees of fluorination of the peripheral phenyl rings (F(x)()DPPs) were synthesized as model compounds for studying electronic effects in nonplanar porphyrins, and detailed electrochemical studies of the chloroiron(III) complexes of these compounds were undertaken. The series of porphyrins, represented as FeDPPCl and as FeF(x)()DPPCl where x = 4, 8 (two isomers), 12, 20, 28, or 36, could be reversibly oxidized by two successive one-electron transfer steps in dichloromethane to give pi-cation radicals and pi-dications, respectively. All of the compounds investigated could also be reduced by three electrons in benzonitrile or pyridine. In benzonitrile, three reversible reductions were observed for the unfluorinated compound FeDPPCl, whereas the FeF(x)()DPPCl complexes generally exhibited irreversible first and second reductions which were coupled to chemical reactions. The chemical reaction associated with the first reduction involved a loss of the chloride ion after generation of [Fe(II)F(x)()DPPCl](-). The second chemical reaction involved a conversion between the initially generated Fe(II) porphyrin pi-anion radical and the final Fe(I) porphyrin reduction product. In pyridine, three reversible one-electron reductions were observed with the second reduction affording stable Fe(II) porphyrin pi-anion radicals for all of the complexes investigated.

Decreased Electron Transfer Rates of Manganese Porphyrins with Conformational Distortion of the Macrocycle.

Slow electron transfer to manganese(iii) porphyrins results when the macrocycle deviates from planarity. This was demonstrated by measuring the kinetics of homogeneous electron transfer from a series of semiquinone radical anions to synthetic manganese porphyrins (shown schematically; R1 =H, Cl, F; R2 =H, F). Three of the four porphyrins studied have nonplanar macrocycles. These results could have implications for the role of manganese in biological electron transfer processes.

Electronic, Spectral, and Electrochemical Properties of (TPPBr(x)())Zn Where TPPBr(x)() Is the Dianion of beta-Brominated-Pyrrole Tetraphenylporphyrin and x Varies from 0 to 8.

The electronic, spectral, and electrochemical characterization of (meso-tetraphenylporphyrinato)zinc(II) complexes bearing between 0 and 8 bromo substituents at the beta-pyrrole positions is reported. The investigated compounds are represented as (TPPBr(x)())Zn where TPPBr(x)() is the dianion of brominated 5,10,15,20-tetraphenylporphyrin and x varies between 0 and 8. Each porphyrin undergoes four well-defined one-electron transfer reactions to yield porphyrin pi-cation radicals and dications upon oxidation and porphyrin pi-anion radicals and dianions upon reduction. Half-wave potentials for the first reduction of (TPPBr(x)())Zn can be described by a single linear free energy relationship, and plots of E(1/2) versus the number of Br groups on the complex show a linear correlation with a positive slope of 63 mV per Br group. This is not the case for the other three electron transfer processes of the compounds where plots of E(1/2) versus the number of Br groups show distinctly different linear correlations for derivatives with 0-4 Br groups and those with 4-8 Br groups. The effect of increasing number of Br groups on the spectral and electrochemical properties of the neutral complexes was examined over the whole series of compounds, and these experimental results are compared to results of theoretical calculations by semiempirical molecular orbital AM1 methods using configurational interactions (CI) over the four Gouterman frontier pi-orbitals. The dihedral angle containing the four porphyrin macrocycle ring nitrogens is proposed as a measure of porphyrin ring nonplanarity, and this value increases with increasing number of Br substituents on (TPPBr(x)())Zn. Results of the AM1-CI = 4 calculations indicate that the spectrally determined HOMO-LUMO gap, i.e., the energy corresponding to the low-energy absorption band, varies in a nonlinear fashion with increasing number of Br substituents on the macrocycle and this is due to both the electronic effect of the substituents and the macrocycle nonplanarity. The HOMO-LUMO gaps theoretically calculated by AM1-CI = 4 methods thus parallel values which are experimentally obtained by electrochemistry or spectroscopy. The lack of well-defined linear free energy relationships for all processes except for the first reduction can be explained on the basis of electronic effects caused by the halogen substituents and nonplanar macrocyclic distortions induced by steric interactions among the peripheral substituents. In the case of porphyrin dication formation, the redox potentials are virtually independent of the bromo substituents.

Synthesis, Characterization, and Spectroelectrochemistry of Cobalt Porphyrins Containing Axially Bound Nitric Oxide.

Several cobalt nitrosyl porphyrins of the form (T(p/m-X)PP)Co(NO) (p/m-X = p-OCH(3) (1), p-CH(3) (2), m-CH(3) (3), p-H (4), m-OCH(3) (5), p-OCF(3) (6), p-CF(3) (7), p-CN (8)) have been synthesized in 30-85% yields by reaction of the precursor cobalt porphyrin with nitric oxide. Compounds 1-7 were also prepared by reaction of the precursor cobalt porphyrin with nitrosonium tetrafluoroborate followed by reduction with cobaltocene. Compounds 1-8 have been characterized by elemental analysis, IR and (1)H NMR spectroscopy, mass spectrometry, and UV-vis spectrophotometry. They are diamagnetic and display nu(NO) bands in CH(2)Cl(2) between 1681 and 1695 cm(-)(1). The molecular structure of 1, determined by a single-crystal X-ray crystallographic analysis, reveals a Co-N-O angle of 119.6(4) degrees. Crystals of 1 are monoclinic, P2/c, with a = 15.052(1) Å, b = 9.390(1) Å, c = 16.274(2) Å, beta = 111.04(1) degrees, V = 2146.8(4) Å(3), Z = 2, T = 228(2) K, D(calcd) = 1.271 g cm(-)(3), and final R1 = 0.0599 (wR2 = 0.1567, GOF = 1.054) for 3330 "observed" reflections with I >/= 2sigma(I). Cyclic voltammetry studies in CH(2)Cl(2) reveal that compounds 1-7 undergo two reversible oxidations and two reversible reductions at low temperature. This is not the case for compound 8, which undergoes two reversible reductions but an irreversible oxidation due to adsorption of the oxidized product onto the electrode surface. Combined electrochemistry-infrared studies demonstrate that each of the compounds 1-7 undergoes a first oxidation at the porphyrin pi ring system and a first reduction at either the metal center or the nitrosyl axial ligand. The formulation for the singly oxidized products of compounds 1-7 as porphyrin pi-cation radicals was confirmed by the presence of bands in the 1289-1294 cm(-)(1) region (for compounds 1-5), which are diagnostic IR bands for generation of tetraarylporphyrin pi-cation radicals.

Electrochemistry and Spectral Characterization of Oxidized and Reduced (TPPBr(x)())FeCl Where TPPBr(x)() Is the Dianion of beta-Brominated-Pyrrole Tetraphenylporphyrin and x Varies from 0 to 8.

The electrochemistry and spectroelectrochemistry of (TPPBr(x)())FeCl (TPPBr(x)() is the dianion of beta-brominated-pyrrole tetraphenylporphyrin and x = 0-8) were examined in PhCN containing tetra-n-butylammonium perchlorate (TBAP) as supporting electrolyte. Each compound undergoes two reversible to quasireversible one-electron oxidations and either three or four reductions within the potential limits of the solvent. The two oxidations occur at the conjugated porphyrin pi ring system, and DeltaE(1/2) between these two electrode reactions increases as the molecule becomes more distorted. The overall reduction of each compound involves the stepwise electrogeneration omicronf an iron(II), iron(I), and iron(I) pi anion radical. An equilibrium between chloride-bound and chloride-free iron(II) forms of the porphyrin is observed with association of the anionic ligand being favored for compounds with x > 5. Singly reduced (TPPBr(x)())FeCl (x = 0 to x = 6) forms both mono- and bis-CO adducts in CH(2)Cl(2). Only the mono-CO adduct is observed for (TPPBr(7))FeCl, and there is no binding at all of CO to (TPPBr(8))FeCl. The nu(CO) of both the mono- and bis-adducts increases with increase in the number of Br groups, but in a nonlinear fashion which is explained in terms of two competing effects. One is the electron-withdrawing affinity of the Br substitutents and the other the nonplanarity of the macrocycle.

Synthesis, Characterization, and Electrochemistry of sigma-Bonded Cobalt Corroles in High Oxidation States.

The synthesis, electrochemistry, spectroscopy, and structural characterization of two high-valent phenyl sigma-bonded cobalt corroles containing a central cobalt ion in formal +IV and +V oxidation states is presented. The characterized compounds are represented as phenyl sigma-bonded cobalt corroles, (OEC)Co(C(6)H(5)) and [(OEC)Co(C(6)H(5))]ClO(4), where OEC is the trianion of 2,3,7,8,12,13,17,18-octaethylcorrole. The electronic distribution in both molecules is discussed in terms of their NMR and EPR spectroscopic data, magnetic susceptibility, and electrochemistry.

Electrochemical and Spectral Characterization of Iron Corroles in High and Low Oxidation States: First Structural Characterization of an Iron(IV) Tetrapyrrole π Cation Radical.

The electrochemistry and spectroscopic properties of three iron corroles were examined in benzonitrile, dichloromethane, and pyridine containing 0.1 M tetra-n-butylammonium perchlorate or tetra-n-ethylammonium hexafluorophosphate as supporting electrolyte. The investigated compounds are represented as (OEC)FeIV(C6H5), (OEC)FeIVCl, and (OEC)FeIII(py), where OEC is the trianion of 2,3,7,8,12,13,17,18-octaethylcorrole. Each iron(IV) corrole undergoes two one-electron reductions and two or three one-electron oxidations depending upon the solvent. Under the same solution conditions, the iron(III) corrole undergoes a single one-electron reduction and one or two one-electron oxidations. Each singly oxidized and singly reduced product was characterized by UV-vis and/or EPR spectroscopy. The data indicate a conversion of (OEC)FeIV(C6H5) and (OEC)FeIVCl to their iron(III) forms upon a one-electron reduction and to iron(IV) corrole π cation radicals upon a one-electron oxidation. The metal center in [(OEC)FeIII(C6H5)]- is low spin (S = 1/2) as compared to electrogenerated [(OEC)FeIIICl]-, which contains an intermediate-spin (S = 3/2) iron(III). (OEC)FeIII(py) also contains an intermediate-spin-state iron(III) and, unlike previously characterized (OEC)FeIII(NO), is converted to an iron(IV) corrole upon oxidation rather than to an iron(III) π cation radical. Singly oxidized [(OEC)FeIV(C6H5)]•+ is the first iron(IV) tetrapyrrole π cation radical to be isolated and was structurally characterized as a perchlorate salt. It crystallizes in the triclinic space group P1̄ with a = 10.783(3) Å, b = 13.826(3) Å, c = 14.151(3) Å, α = 78.95(2)°, ß = 89.59(2)°, and γ = 72.98(2)° at 293 K with Z = 2. Refinement of 8400 reflections and 670 parameters against F o2 yields R1 = 0.0864 and wR2 = 0.2293. The complex contains a five-coordinated iron with average Fe-N bond lengths of 1.871(3) Å. The formulation of the electron distribution in this compound was confirmed by Mössbauer, X-ray crystallographic, and magnetic susceptibility data as well as by EPR spectroscopy, which gives evidence for strong antiferromagnetic coupling between the iron(IV) center and the singly oxidized corrole macrocycle.