Influence of Surface Chemistry on Host/Guest Interactions: A Model Study on Redox-Sensitive ß-Cyclodextrin/Ferrocene Complexes.

While host/guest interactions are widely used to control molecular assembly on surfaces, quantitative information on the effect of surface chemistry on their efficiency is lacking. To address this question, we combined electrochemical characterization with quartz crystal microbalance with dissipation monitoring to study host/guest interactions between surface-attached ferrocene (Fc) guests and soluble ß-cyclodextrin (ß-CD) hosts. We identified several parameters that influence the redox response, ß-CD complexation ability, and repellent properties of Fc monolayers, including the method of Fc grafting, the linker connecting Fc with the surface, and the diluting molecule used to tune Fc surface density. The study on monovalent ß-CD/Fc complexation was completed by the characterization of multivalent interactions between Fc monolayers and ß-CD-functionalized polymers, with new insights being obtained on the interplay between the surface chemistry, binding efficiency, and reversibility under electrochemical stimulus. These results should facilitate the design of well-defined functional interfaces and their implementation in stimuli-responsive materials and sensing devices.

Distinguishing Plasmin-Generating Microvesicles: Tiny Messengers Involved in Fibrinolysis and Proteolysis.

A number of stressors and inflammatory mediators (cytokines, proteases, oxidative stress mediators) released during inflammation or ischemia stimulate and activate cells in blood, the vessel wall or tissues. The most well-known functional and phenotypic responses of activated cells are (1) the immediate expression and/or release of stored or newly synthesized bioactive molecules, and (2) membrane blebbing followed by release of microvesicles. An ultimate response, namely the formation of extracellular traps by neutrophils (NETs), is outside the scope of this work. The main objective of this article is to provide an overview on the mechanism of plasminogen reception and activation at the surface of cell-derived microvesicles, new actors in fibrinolysis and proteolysis. The role of microvesicle-bound plasmin in pathological settings involving inflammation, atherosclerosis, angiogenesis, and tumour growth, remains to be investigated. Further studies are necessary to determine if profibrinolytic microvesicles are involved in a finely regulated equilibrium with pro-coagulant microvesicles, which ensures a balanced haemostasis, leading to the maintenance of vascular patency.

Grafted dinuclear zinc complexes for selective recognition of phosphatidylserine: Application to the capture of extracellular membrane microvesicles.

Microvesicles (MVs) are key markers in human body fluids that reflect cellular activation related to diseases as thrombosis. These MVs display phosphatidylserine at the outer leaflet of their plasma membrane as specific recognition moieties. The work reported in this manuscript focuses on the development of an original method where MVs are captured by bimetallic zinc complexes. A set of ligands have been synthetized based on a phenol spacer bearing in para position an amine group appended to a short or a longer alkyl chain (for grafting on surface) and bis(dipicolylamine) arms in ortho position (for zinc coordination). The corresponding dibridged zinc phenoxido and hydroxido complexes have been prepared in acetronitrile in presence of triethylamine and characterized by several spectroscopic techniques. The pH-driven interconversion studies for both complexes in H2O:DMSO (70:30) evidence that at physiologic pH the main species are mono-bridged by the phenoxido spacer. An X-Ray structure obtained from complex 2 (based on the ligand with the amine group on the short chain) in aqueous medium confirms the presence of a mono-bridged complex. Then, the complexes have been used for interaction studies with short-chain phospholipids. Both have established the selective recognition of the anionic phosphatidylserine model versus zwitterionic phospholipids (in solution by 31P NMR and after immobilization on solid support by surface plasmon resonance (SPR)). Moreover, both complexes have also demonstrated their ability to capture MVs isolated from human plasma. These complexes are thus promising candidates for MVs probing by a new approach based on coordination chemistry.

Conformational transition in SPR experiments: impact of spacer length, immobilization mode and aptamer density on signal sign and amplitude.

Surface plasmon resonance (SPR) is an optical, real-time and label-free technique which represents a standard to study biomolecular interactions. While SPR signals are usually positive upon recognition, a few cases of negative signals have been reported because of significant conformational transition of the receptor upon the recognition of the target. In this study, we reported on the observation of negative or null SPR signals for an aptamer recognition with its low molecular weight target. The introduction of a spacer group for the aptamer immobilization led to a null SPR signal despite the device sensitivity and effective target recognition (a KD around 200 nM as demonstrated using a quartz crystal microbalance with dissipation monitoring and isothermal titration calorimetry). We demonstrated that this unconventional signal could be attributed to two opposite contributions: a positive one is afforded by the aptamer recognition and folding whereas a negative one results from the refractive index increment (RII) deviation upon the formation of the complex (ligand/analyte). We also demonstrated that the RII deviation is sensitive to the modification of the sequence flexibility and therefore depends on the anchoring procedure and the spacer length between the anchoring function and the site of recognition.

Direct Detection of Low-Molecular-Weight Compounds in 2D and 3D Aptasensors by Biolayer Interferometry.

The direct biolayer interferometry (BLI) measurement of low-molecular-weight (LMW) analytes (<200 Da) still represents a challenge, in particular, when low receptor densities are used. BLI is a powerful optical technique for the label-free, real-time characterization and quantification of biomolecular interactions at interfaces. We demonstrate herein that the quantification of biomolecular recognition is possible by BLI using either 2D-like or 3D platforms for aptamer ligand immobilization. The influence of the aptamer density on the interaction was evaluated and compared for the two sensor architectures. Despite the LMW of the analyte, BLI monitoring led to signals that are exploitable for affinity and kinetic studies, even at low aptamer density. We demonstrate that the immobilization format as well as the aptamer density has a crucial influence on the determination of the recognition parameters.

Sensor Based on Aptamer Folding to Detect Low-Molecular Weight Analytes.

Aptamers have emerged as promising biorecognition elements in the development of biosensors. The present work focuses on the application of quartz crystal microbalance with dissipation monitoring (QCM-D) for the enantioselective detection of a low molecular weight target molecule (less than 200 Da) by aptamer-based sensors. While QCM-D is a powerful technique for label-free, real-time characterization and quantification of molecular interactions at interfaces, the detection of small molecules interacting with immobilized receptors still remains a challenge. In the present study, we take advantage of the aptamer conformational changes upon the target binding that induces displacement of water acoustically coupled to the sensing layer. As a consequence, this phenomenon leads to a significant enhancement of the detection signal. The methodology is exemplified with the enantioselective recognition of a low molecular weight model compound, L-tyrosinamide (L-Tym). QCM-D monitoring of L-Tym interaction with the aptamer monolayer leads to an appreciable signal that can be further exploited for analytical purposes or thermodynamics studies. Furthermore, in situ combination of QCM-D with spectroscopic ellipsometry unambiguously demonstrates that the conformational change induces a nanometric decrease of the aptamer monolayer thickness. Since QCM-D is sensitive to the whole mass of the sensing layer including water that is acoustically coupled, a decrease in thickness of the highly hydrated aptamer layer induces a sizable release of water that can be easily detected by QCM-D.

Interaction of polycationic Ni(II)-salophen complexes with G-quadruplex DNA.

A series of nine Ni(II) salophen complexes involving one, two, or three alkyl-imidazolium side-chains was prepared. The lengths of the side-chains were varied from one to three carbons. The crystal structure of one complex revealed a square planar geometry of the nickel ion. Fluorescence resonance energy transfer melting of G-quadruplex structures in the presence of salophen complex were performed. The G-quadruplex DNA structures were stabilized in the presence of the complexes, but a duplex DNA was not. The binding constants of the complexes for parallel and antiparallel G-quadruplex DNA, as well as hairpin DNA, were measured by surface plasmon resonance. The compounds were selective for G-quadruplex DNA, as reflected by equilibrium dissociation constant KD values in the region 0.1-1 µM for G-quadruplexes and greater than 2 µM for duplex DNA. Complexes with more and shorter side-chains had the highest binding constants. The structural basis for the interaction of the complexes with the human telomeric G-quadruplex DNA was investigated by computational studies: the aromatic core of the complex stacked over the last tetrad of the G-quadruplex with peripherical cationic side chains inserted into opposite grooves. Biochemical studies (telomeric repeat amplification protocol assays) indicated that the complexes significantly inhibited telomerase activity with IC50 values as low as 700 nM; the complexes did not significantly inhibit polymerase activity.

Amphipol mediated surface immobilization of FhuA: a platform for label-free detection of the bacteriophage protein pb5.

Biotinylated amphipol was used to entrap FhuA (an E. coli outer membrane protein) and immobilize the FhuA-amphipol complex on streptavidin surfaces. Using this assembly, we have successfully devised surface-based assays for studying the recognition of FhuA by pb5 (a bacteriophage T5 protein) and determination of the affinity constant.

Tethered bilayer lipid membranes on mixed self-assembled monolayers of a novel anchoring thiol: impact of the anchoring thiol density on bilayer formation.

Tethered bilayer lipid membranes (tBLMs) are designed on mixed self-assembled monolayers (SAMs) of a novel synthetic anchoring thiol, 2,3-di-o-palmitoylglycerol-1-tetraethylene glycol mercaptopropanoic acid ester (TEG-DP), and a new short dilution thiol molecule, tetraethylene glycol mercaptopropanoic acid ester (TEG). tBLM formation was accomplished by self-directed fusion of small unilamellar vesicles of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine. The influence of the dilution of the anchoring thiol molecule in the SAM on the vesicle fusion process and on the properties of the resulting tBLMs is studied. It is observed by quartz crystal microbalance that vesicle fusion is a one-step process for a pure TEG-DP SAM as well as for mixed SAMs containing a high concentration of the anchoring thiol. However, upon dilution of the anchoring thiol to moderate concentrations, this process is decelerated and possibly follows a pathway different from that observed on a pure TEG-DP SAM. Electrochemical impedance spectroscopy is used to qualitatively correlate the composition of the SAM to the electrical properties of the tBLM. In this paper we also delineate the necessity of a critical concentration of this anchoring TEG-DP thiol as a requisite for inducing the fusion of vesicles to form a tBLM.

Electrochemically controlled adsorption of Fc-functionalized polymers on beta-CD-modified self-assembled monolayers.

This work presents an in situ study of the adsorption/desorption behavior of ferrocene(Fc)-functionalized linear polymers on a gold surface covered with beta-cyclodextrin(beta-CD)-modified self-assembled monolayers (SAMs). The characterization of binary SAMs obtained with HS-(CH(2))(11)-EG(6)-N(3) and HS-(CH(2))(11)-EG(4)-OH (EG, ethylene glycol) was performed using a quartz crystal microbalance with dissipation monitoring (QCM-D), cyclic voltammetry, and contact angle measurements. The functionalization of SAMs with beta-CD was made via the "click" reaction between the beta-CD monoalkyne derivative and azide groups exhibited by SAMs. The formation of the host-guest complex between SAM-beta-CD and Fc-derivatized polymers (chitosan (CHI) and poly(allylamine hydrochloride) (PAH)) was studied by QCM-D. The viscoelastic model of Voinova was used to fit QCM-D curves recorded during the adsorption and electrochemically controlled desorption of CHI-Fc and PAH-Fc on SAM-beta-CD. Using QCM-D coupled to cyclic voltammetry, we demonstrated that CHI-Fc and PAH-Fc can be successfully deposited on a SAM-beta-CD-coated gold surface forming a stable multivalent inclusion complex between Fc moieties of polymer and beta-CD cavities of SAM. We also showed that all specifically attached polymer chains can be detached from the SAM-beta-CD-coated gold surface by applying an electric field.

Template-assembled synthetic G-quadruplex (TASQ): a useful system for investigating the interactions of ligands with constrained quadruplex topologies.

A new biomolecular device for investigating the interactions of ligands with constrained DNA quadruplex topologies, using surface plasmon resonance (SPR), is reported. Biomolecular systems containing an intermolecular-like G-quadruplex motif 1 (parallel G-quadruplex conformation), an intramolecular G-quadruplex 2, and a duplex DNA 3 have been designed and developed. The method is based on the concept of template-assembled synthetic G-quadruplex (TASQ), whereby quadruplex DNA structures are assembled on a template that allows precise control of the parallel G-quadruplex conformation. Various known G-quadruplex ligands have been used to investigate the affinities of ligands for intermolecular 1 and intramolecular 2 DNA quadruplexes. As anticipated, ligands displaying a pi-stacking binding mode showed a higher binding affinity for intermolecular-like G-quadruplexes 1, whereas ligands with other binding modes (groove and/or loop binding) showed no significant difference in their binding affinities for the two quadruplexes 1 or 2. In addition, the present method has also provided information about the selectivity of ligands for G-quadruplex DNA over the duplex DNA. A numerical parameter, termed the G-quadruplex binding mode index (G4-BMI), has been introduced to express the difference in the affinities of ligands for intermolecular G-quadruplex 1 against intramolecular G-quadruplex 2. The G-quadruplex binding mode index (G4-BMI) of a ligand is defined as follows: G4-BMI=K(D)(intra)/K(D)(inter), where K(D)(intra) is the dissociation constant for intramolecular G-quadruplex 2 and K(D)(inter) is the dissociation constant for intermolecular G-quadruplex 1. In summary, the present work has demonstrated that the use of parallel-constrained quadruplex topology provides more precise information about the binding modes of ligands.

The flexible motif V of Epstein-Barr virus deoxyuridine 5'-triphosphate pyrophosphatase is essential for catalysis.

Deoxyuridine 5'-triphosphate pyrophosphatases (dUTPases) are ubiquitous enzymes essential for hydrolysis of dUTP, thus preventing its incorporation into DNA. Although Epstein-Barr virus (EBV) dUTPase is monomeric, it has a high degree of similarity with the more frequent trimeric form of the enzyme. In both cases, the active site is composed of five conserved sequence motifs. Structural and functional studies of mutants based on the structure of EBV dUTPase gave new insight into the mechanism of the enzyme. A first mutant allowed us to exclude a role in enzymatic activity for the disulfide bridge involving the beginning of the disordered C terminus. Sequence alignments revealed two groups of dUTPases, based on the position in sequence of a conserved aspartic acid residue close to the active site. Single mutants of this residue in EBV dUTPase showed a highly impaired catalytic activity, which could be partially restored by a second mutation, making EBV dUTPase more similar to the second group of enzymes. Deletion of the flexible C-terminal tail carrying motif V resulted in a protein completely devoid of enzymatic activity, crystallizing with unhydrolyzed Mg(2+)-dUTP complex in the active site. Point mutations inside motif V highlighted the essential role of lid residue Phe(273). Magnesium appears to play a role mainly in substrate binding, since in absence of Mg(2+), the K(m) of the enzyme is reduced, whereas the k(cat) is less affected.

Promotion of sugar-lectin recognition through the multiple sugar presentation offered by regioselectively addressable functionalized templates (RAFT): a QCM-D and SPR study.

The investigation of recognition events between carbohydrates and proteins, especially the understanding of how spatial factors and binding avidity are correlated, remains a great interest for glycobiology. In this context we have investigated by nanogravimetry (QCM-D) and surface plasmon resonance (SPR), the kinetics and thermodynamics of the interaction between concanavalin A (Con A) and various neoglycopeptide ligands of low molecular weight. Regioselectively addressable functionalized templates (RAFT) have been used as scaffolds for the design of multivalent neoglycopeptides bearing thiol or biotin functions for their anchoring on transducer surfaces. Although these multivalent neoglycopeptide ligands cannot span multiple binding sites within the same Con A protein, they have increased activities relative to their monovalent counterpart. Our results emphasize that the multivalent RAFT ligands function by clustering several lectins, which leads to enhanced affinities.

Multilayer films based on host-guest interactions between biocompatible polymers.

Multilayer films are formed using host-guest interaction between two derivatized chitosans, one, with beta-cyclodextrin cavities and the other with adamantyl moieties.

Analytical investigation of the interactions between SC3 hydrophobin and lipid layers: elaborating of nanostructured matrixes for immobilizing redox systems.

Hydrophobins are highly tensioactive fungal proteins with a pronounced affinity for interfaces and a propensity for self-assembly. Recently, these proteins were shown to be useful in retaining different molecules on solid surfaces. This finding offers a possibility for developing new functional materials, while creating the necessity of further research at a deeper mechanistic level. In this work, the mechanisms governing the surface phenomena were studied using native Schizophyllum commune hydrophobin (SC3) and lipid mono- and bilayers; the soft matter systems were used to get a handle on the interactive protein/interface effects at a molecular level. The results obtained indicated that the SC3/lipid membrane interactions were adjusted by protein conformational adaptation, allowing its incorporation into lipid matrixes; the incorporation of a chelating SC3 hydrophobin (PFA-SC3) in a monoolein cubic phase yielded a biomimetic, cell-like system of Cu(II) cation immobilization. This system, which is suitable for modifying electrode surface and monitoring the Cu(II)/Cu(0) redox process, may be of practical interest in switching and sensing.

Formation of Langmuir layers and surface modification using new upper-rim fully tethered bipyridinyl or bithiazolyl cyclodextrins and their fluorescent metal complexes.

Seven new amphiphilic cyclodextrins bearing bipyridyl or bithiazolyl moieties at the narrow rim and free hydroxyl or methoxyl groups at the wide rim of the cyclooctaamylose crown were synthesized using a one step "phosphine imide" approach. These ligands form metal complexes that have fluorescence properties with potentials for optical applications. Here, the cyclodextrin derivatives were used as probes for evaluating the role of different moieties in the self-assembly process, providing crucial information in creating functional devices. The behavior of these molecules and of complexes with EuIII in some cases was studied in Langmuir films using surface pressure (pi) and surface potential (deltaV) measurements performed as a function of film compression (compression isotherms). For chosen cyclodextrins, Brewster angle microscopy (BAM) in monolayers was performed. Films formed with derivatives 1, 3, 7, and 2compl were transferred on mica using the Langmuir-Blodgett technique. The properties of the films deposited on mica were analyzed with fluorimetry and, in the case of derivative 7, using fringe of equal chromatic order technique (FECO). The monolayer structure and the fluorescence properties of the Langmuir-Blodgett films indicate that the derivatives studied can be used for preparing cyclodextrin-based optical devices.