Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 7 de 7
Filter
Add more filters










Database
Language
Publication year range
1.
J Dent ; 63: 1-7, 2017 Aug.
Article in English | MEDLINE | ID: mdl-28456557

ABSTRACT

OBJECTIVES: The objectives of the present study were to (1) retrospectively evaluate documented cases of ceramic and composite endocrowns performed using immediate dentin sealing (IDS); (2) correlate failures with clinical parameters such as tooth preparation characteristics and occlusal parameters. METHODS: 99 documented cases of endocrowns were evaluated after a mean observation period of 44.7±34.6months. A classification of restorations was established in function of the level of damage of residual tooth tissues after preparation, from 1 to 3. Evaluation was performed according to FDI criteria and endodontic outcomes were analyzed. Occlusal risk factors were examined and fractographic analysis was performed in case of fracture. RESULTS: 48.4% of patients were shown to present occlusal risk factors. 75.8% of restorations were Class 3 endocrowns. 56.6% were performed on molars, 41.4% on premolars and 2.0% on canines. 84.8% were performed in lithium-disilicate glass-ceramic and 12.1% in Polymer-Infiltrated Ceramic Network (PICN) material. The survival and success rates of endocrowns were 99.0% and 89.9% respectively, while the 10-year Kaplan-Meier estimated survival and success rates were 98.8% and 54.9% respectively. Ten failures were detected: periodontal disease (n=3), endocrown debonding (n=2), minor chipping (n=2), caries recurrence (n=2) and major fractures (n=1). Due to the reduced amount of failures, no statistical correlation could be established with clinical parameters. CONCLUSIONS: Endocrowns were shown to constitute a reliable approach to restore severely damaged molars and premolars, even in the presence of extensive coronal tissue loss or occlusal risk factors, such as bruxism or unfavorable occlusal relationships. CLINICAL SIGNIFICANCE: Practitioners should consider the endocrown instead of the post and core approach to restore severely damaged non-vital posterior teeth. This minimally invasive solution reduces the risk of catastrophic failures and is easily performed. The use of IDS procedure and lithium-disilicate glass-ceramic as prosthesis material gave very good results.


Subject(s)
Ceramics , Crowns , Dental Restoration Failure , Dental Restoration, Permanent , Resin Cements , Adult , Aged , Aged, 80 and over , Bicuspid/pathology , Dental Marginal Adaptation , Dental Porcelain , Female , Humans , Male , Malocclusion , Masticatory Muscles , Materials Testing , Middle Aged , Molar/pathology , Post and Core Technique , Retrospective Studies , Risk Factors , Survival Analysis , Tooth Fractures , Tooth Preparation
2.
Contemp Clin Trials Commun ; 4: 25-32, 2016 Dec 15.
Article in English | MEDLINE | ID: mdl-29736467

ABSTRACT

BACKGROUND: Recent introduction of computer-aided design/computer-aided manufacturing (CAD/CAM) monolithic zirconia dental prostheses raises the issue of material low thermal degradation (LTD), a well-known problem with zirconia hip prostheses. This phenomenon could be accentuated by masticatory mechanical stress. Until now zirconia LTD process has only been studied in vitro. This work introduces an original protocol to evaluate LTD process of monolithic zirconia prostheses in the oral environment and to study their general clinical behavior, notably in terms of wear. METHODS/DESIGN: 101 posterior monolithic zirconia tooth elements (molars and premolars) are included in a 5-year prospective clinical trial. On each element, several areas between 1 and 2 mm2 (6 on molars, 4 on premolars) are determined on restoration surface: areas submitted or non-submitted to mastication mechanical stress, glazed or non-glazed. Before prosthesis placement, ex vivo analyses regarding LTD and wear are performed using Raman spectroscopy, SEM imagery and 3D laser profilometry. After placement, restorations are clinically evaluated following criteria of the World Dental Federation (FDI), complemented by the analysis of fracture clinical risk factors. Two independent examiners perform the evaluations. Clinical evaluation and ex vivo analyses are carried out after 6 months and then each year for up to 5 years. DISCUSSION: For clinicians and patients, the results of this trial will justify the use of monolithic zirconia restorations in dental practice. For researchers, the originality of a clinical study including ex vivo analyses of material aging will provide important data regarding zirconia properties.Trial registration: ClinicalTrials.gov Identifier: NCT02150226.

3.
J Dent ; 41(12): 1164-74, 2013 Dec.
Article in English | MEDLINE | ID: mdl-24135294

ABSTRACT

OBJECTIVES: The first objective of this study was to retrospectively evaluate zirconia-based restorations (ZBR). The second was to correlate failures with clinical parameters and to identify and to analyse chipping failures using fractographic analysis. METHODS: 147 ZBR (tooth- and implant-supported crowns and fixed partial dentures (FPDs)) were evaluated after a mean observation period of 41.5 ± 31.8 months. Accessorily, zirconia implant abutments (n=46) were also observed. The technical (USPHS criteria) and the biological outcomes of the ZBR were evaluated. Occlusal risk factors were examined: occlusal relationships, parafunctional habits, and the presence of occlusal nightguard. SEM fractographic analysis was performed using the intra-oral replica technique. RESULTS: The survival rate of crowns and FPDs was 93.2%, the success rate was 81.63% and the 9-year Kaplan-Meier estimated success rate was 52.66%. The chipping rate was 15% and the framework fracture rate was 2.7%. Most fractographic analyses revealed that veneer fractures originated from occlusal surface roughness. Several parameters were shown to significantly influence veneer fracture: the absence of occlusal nightguard (p=0.0048), the presence of a ceramic restoration as an antagonist (p=0.013), the presence of parafunctional activity (p=0.018), and the presence of implants as support (p=0.026). The implant abutments success rate was 100%. CONCLUSIONS: The results of the present study confirm that chipping is the first cause of ZBR failure. They also underline the importance of clinical parameters in regards to the explanation of this complex problem. This issue should be considered in future prospective clinical studies. CLINICAL SIGNIFICANCE: Practitioners can reduce chipping failures by taking into account several risk parameters, such as the presence of a ceramic restoration as an antagonist, the presence of parafunctional activity and the presence of implants as support. The use of an occlusal nightguard can also decrease failure rate.


Subject(s)
Dental Materials/chemistry , Dental Prosthesis , Dental Restoration Failure , Zirconium/chemistry , Adult , Aged , Crowns , Dental Abutments , Dental Caries/complications , Dental Marginal Adaptation , Dental Occlusion, Traumatic/complications , Dental Plaque Index , Dental Prosthesis, Implant-Supported , Dental Restoration Wear , Dental Veneers , Denture, Partial, Fixed , Female , Humans , Male , Malocclusion/classification , Malocclusion/complications , Materials Testing , Middle Aged , Occlusal Splints , Periodontal Index , Retrospective Studies , Surface Properties , Survival Analysis , Tooth, Nonvital/complications
4.
Dent Mater ; 28(4): 378-84, 2012 Apr.
Article in English | MEDLINE | ID: mdl-22153718

ABSTRACT

OBJECTIVES: Framework design is reported to influence chipping in zirconia-based restorations, which is an important cause of failure of such restorations. Residual stress profile in the veneering ceramic after the manufacturing process is an important predictive factor of the mechanical behavior of the material. The objective of this study is to investigate the influence of framework thickness on the stress profile measured in zirconia-based structures. METHODS: The stress profile was measured with the hole-drilling method in bilayered disc samples of 20mm diameter with a 1.5 mm thick veneering ceramic layer. Six different framework thicknesses from 0.5 mm to 3 mm were studied. Two different cooling procedures were also investigated. RESULTS: Compressive stresses were observed in the surface, and tensile stresses in the depth of most of the samples. The slow cooling procedure was found to promote the development of interior tensile stresses, except for the sample with a 3mm thick framework. With the tempering procedure, samples with a 1.5 mm thick framework exhibited the most favorable stress profile, while thicker and thinner frameworks exhibited respectively in surface or interior tensile stresses. SIGNIFICANCE: The measurements performed highlight the importance of framework thickness, which determine the nature of stresses and can explain clinical failures encountered, especially with thin frameworks. The adequate ratio between veneering ceramic and zirconia is hard to define, restricting the range of indications of zirconia-based restorations until a better understanding of such a delicate veneering process is achieved.


Subject(s)
Dental Porcelain , Dental Veneers , Denture Design , Denture, Partial, Fixed , Materials Testing/methods , Yttrium , Zirconium , Cold Temperature , Compressive Strength , Dental Stress Analysis , Phase Transition , Tensile Strength
5.
Dent Mater ; 28(2): 160-7, 2012 Feb.
Article in English | MEDLINE | ID: mdl-22153325

ABSTRACT

OBJECTIVES: The veneering process of frameworks induces residual stresses and can initiate cracks when combined with functional stresses. The stress distribution within the veneering ceramic as a function of depth is a key factor influencing failure by chipping. This is a well-known problem with Yttria-tetragonal-zirconia-polycrystal based fixed partial dentures. The objective of this study is to investigate the influence of veneer thickness on the stress profile in zirconia- and metal-based structures. METHODS: The hole-drilling method, often used for engineering measurements, was adapted for use with veneering ceramic. The stress profile was measured in bilayered disc samples of 20 mm diameter, with a 1 mm thick zirconia or metal framework. Different veneering ceramic thicknesses were performed: 1 mm, 1.5 mm, 2 mm, 2.5 mm and 3 mm. RESULTS: All samples exhibited the same type of stress vs. depth profile, starting with compressive at the ceramic surface, decreasing with depth up to 0.5-1.0 mm from the surface, and then becoming compressive again near the framework, except for the 1.5 mm-veneered zirconia samples which exhibited interior tensile stresses. Stresses in the surface of metal samples were not influenced by veneer thickness. Variation of interior stresses at 1.2 mm from the surface in function of veneer thickness was inverted for metal and zirconia samples. SIGNIFICANCE: Veneer thickness influences in an opposite way the residual stress profile in metal- and in zirconia-based structures. A three-step approach and the hypothesis of the crystalline transformation are discussed to explain the less favorable residual stress development in zirconia samples.


Subject(s)
Ceramics/chemistry , Dental Porcelain/chemistry , Dental Veneers , Metal Ceramic Alloys/chemistry , Yttrium/chemistry , Zirconium/chemistry , Acid Etching, Dental/methods , Aluminum Oxide/chemistry , Aluminum Silicates/chemistry , Carbon Compounds, Inorganic/chemistry , Chromium Alloys/chemistry , Computer-Aided Design , Dental Etching/methods , Dental Polishing/instrumentation , Dental Stress Analysis/instrumentation , Hot Temperature , Humans , Hydrofluoric Acid/chemistry , Materials Testing , Mechanical Phenomena , Potassium Compounds/chemistry , Silicon Compounds/chemistry , Stress, Mechanical , Surface Properties , Thermodynamics
6.
Dent Mater ; 27(9): 906-14, 2011 Sep.
Article in English | MEDLINE | ID: mdl-21676454

ABSTRACT

OBJECTIVES: The manufacture of dental crowns and bridges generates residual stresses within the veneering ceramic and framework during the cooling process. Residual stress is an important factor that control the mechanical behavior of restorations. Knowing the stress distribution within the veneering ceramic as a function of depth can help the understanding of failures, particularly chipping, a well-known problem with Yttria-tetragonal-zirconia-polycrystal based fixed partial dentures. The objective of this study is to investigate the cooling rate dependence of the stress profile in veneering ceramic layered on metal and zirconia frameworks. METHODS: The hole-drilling method, often used for engineering measurements, was adapted for use with veneering ceramic. The stress profile was measured in bilayered disc samples 20 mm in diameter, with a 0.7 mm thick metal or Yttria-tetragonal-zirconia-polycrystal framework and a 1.5mm thick veneering ceramic. Three different cooling procedures were investigated. RESULTS: The magnitude of the stresses in the surface of the veneering ceramic was found to increase with cooling rate, while the interior stresses decreased. At the surface, compressive stresses were observed in all samples. In the interior, compressive stresses were observed in metal samples and tensile in zirconia samples. SIGNIFICANCE: Cooling rate influences the magnitude of residual stresses. These can significantly influence the mechanical behavior of metal-and zirconia-based bilayered systems. The framework material influenced the nature of the interior stresses, with zirconia samples showing a less favorable stress profile than metal.


Subject(s)
Dental Porcelain , Dental Prosthesis Design , Dental Stress Analysis/methods , Dental Veneers , Metal Ceramic Alloys , Chromium Alloys , Cold Temperature , Compressive Strength , Materials Testing/methods , Stress, Mechanical , Tensile Strength , Yttrium , Zirconium
7.
Dent Mater ; 27(5): 439-44, 2011 May.
Article in English | MEDLINE | ID: mdl-21232786

ABSTRACT

OBJECTIVES: Mismatch in thermal expansion properties between veneering ceramic and metallic or high-strength ceramic cores can induce residual stresses and initiate cracks when combined with functional stresses. Knowledge of the stress distribution within the veneering ceramic is a key factor for understanding and predicting chipping failures, which are well-known problems with Yttria-tetragonal-zirconia-polycrystal based fixed partial dentures. The objectives of this study are to develop a method for measuring the stress profile in veneering ceramics and to compare ceramic-fused-to-metal compounds to veneered Yttria-tetragonal-zirconia-polycrystal ceramic. METHODS: The hole-drilling method, often used for engineering measurements, was adapted for use with veneering ceramic. Because of the high sensitivity needed in comparison with industrial applications, a high sensitivity electrical measurement chain was developed. RESULTS: All samples exhibited the same type of stress vs. depth profile, starting with compressive at the ceramic surface, decreasing with depth and becoming tensile at 0.5-1.0mm from the surface, and then becoming slightly compressive again. The zirconia samples exhibited a stress depth profile of larger magnitude. SIGNIFICANCE: The hole drilling method was shown be a practical tool for measuring residual stresses in veneering ceramics.


Subject(s)
Chromium Alloys/chemistry , Dental Porcelain/chemistry , Dental Veneers , Materials Testing/methods , Metal Ceramic Alloys/chemistry , Yttrium/chemistry , Zirconium/chemistry , Aluminum Silicates/chemistry , Ceramics/chemistry , Computer-Aided Design , Crowns , Dental Etching/methods , Dental Polishing , Denture, Partial, Fixed , Electric Conductivity , Hot Temperature , Humans , Potassium Compounds/chemistry , Stress, Mechanical , Surface Properties , Thermodynamics , Transducers
SELECTION OF CITATIONS
SEARCH DETAIL
...